You are on page 1of 3

Job No:

MAINTENANCE Engineer

CHECKLIST Date:

✘ WEEKLY(W) ✘ MONTHLY(M) ✘ 3 MONTHLY(3)


ANNUALLY(A)
FORTNIGHTLY(F) 2 MONTHLY(2) 6 MONTHLY(6)
ITEM
NO EVAPORATIVE CONDENSER
17 W 1 Check condition of drive V-belts. Replace if necessary.
18 F 2 Check operation of low water level float.
19 W 1 Check operation of condenser pan water heater and thermostat.

20 M 4 Check ball valve for correct operation, lubricate arm and set for correct water level.

21 M 4 Check and lubricate fan shaft bearings and locking collars.


22 2 8 Check operation of fan motor. Grease adjusting screw.
23 3 12 Check/adjust condenser drives if necessary.

24 W 1 Check correct operation of condenser drive vibration switch.

25 6 26 Check that clean and chlorination is being carried out.


26 A 52 Check on external condition of condenser, I.e. rust, dirt, etc.
27 W 1 Check internal condition of condenser, I.e. rust, dirt, etc.
28 W 1 Check operation of fan dampers.
29 W 1 Check condenser on start-up and when running.
30 F 2 Take vibration monitoring checks.
31 W 1 Check softender brine bin level. Top up with salt as necessary and report on stock level.
32 W 1 Check level in chemical bin. Top up as necessary.
33 W 1 Check operation of dosing pumps.
Engineer's Customer's
Signature Signature
A

You might also like