Professional Documents
Culture Documents
Pressure Vessel Design DRF2261 Fabrication Drawing Rubric: Left Unmarked and Awarded A Zero
Pressure Vessel Design DRF2261 Fabrication Drawing Rubric: Left Unmarked and Awarded A Zero
DRF2261
There is a minimum level of completion that is required before any grades will be allotted. At a
minimum, the project must have:
- Vessel side-view and vessel end-view with correct elevations for HLL, NLL, LLL and jigsets
for the level gauge and level controller.
- List of connections, sizes, and ratings.
- Title block information on design pressures, temperatures, corrosion allowance,
insulation thickness, hydrotest pressure, and radiography.
- Vessel nozzle thicknesses and shell thicknesses must match calculated values.
These have been evaluated through Assignments 1 to 5. Any deficiency in the drawing will be
left unmarked and awarded a zero.
The following grades will be assigned for completing the fabrication drawing with the following
tasks:
Total 100