Professional Documents
Culture Documents
YONO CASH
Ingenico
Micro ATM
implementati
on Manual
Jun, 2019
State Bank of India
YONO CASH INGENICO MICRO ATM IMPLEMENTATION MANUAL | Jun, 2019
1 Pre-requisites:
2. LLT tool should be available in PC. If not then LLT tool and Ingenico Application
for YONO Cash will be available in Report Menu Download File Menu YONO
CASH DRIVERS Click on Ingenico Folder to download the DLL, Application, LLT tool
and YONO.CRT file.
5. Please follow the steps mentioned in document to install the LLT tool
6. Go to extracted folder where DLL.exe is placed. Double click on DLL.exe for in-
stallation of DLL.
2 The detailed steps to install applications in Ingenico device through LLT are
listed below.
1. Telephony services need to be started.
2. Click on Start menu -> Services
YONO CASH INGENICO MICRO ATM IMPLEMENTATION MANUAL | Jun, 2019
5. Select the Telephony services from the above window and double click on it to
open.
6. Click on Telephony services (Double click). It will show the window to change the
Start-up Type & To Start service.
10. After starting Telephony services, we can connect the device trough LLT. Further
steps are mentioned below.
YONO CASH INGENICO MICRO ATM IMPLEMENTATION MANUAL | Jun, 2019
3. Connect and power on Ingenico device. Press “F” key followed by “0” or Green
button. Device screen should show “waiting for data… “status.
YONO CASH INGENICO MICRO ATM IMPLEMENTATION MANUAL | Jun, 2019
4. Now put the device in LLT mode by pressing “Yellow” and “.” button together,
subsequently keep “f3” button pressed. Now on device screen you will show “LLT” as
follows.
YONO CASH INGENICO MICRO ATM IMPLEMENTATION MANUAL | Jun, 2019
Double click on the black highlighted button to connect the device through LLT.
YONO CASH INGENICO MICRO ATM IMPLEMENTATION MANUAL | Jun, 2019
10
6. Once device connected, user can view the files in device and PC paths as high-
lighted in blue in below screenshot. [PC Path--> D:\APPLICATIONS & Device Path
SWAP/HOST]
7. Please right-click on KIOSK_RUPAY.AGN file and copy the file. Open SWAP folder
and paste it in SWAP folder.
8. Please right-click on YONO.CRT file and copy the file. Open HOST folder and
paste it in HOST folder.
** (User can also drag and drop the files from PC to device and vice versa if Copy and
Paste is not possible)
** Normally KIOSK_RUPAY.AGN file will be placed in device “SWAP” path and
YONO.CRT files will be placed in “HOST” path.
YONO CASH INGENICO MICRO ATM IMPLEMENTATION MANUAL | Jun, 2019
11
9. Once the files are successfully placed in device path you will be getting an alert
as highlighted in black in the above screenshot.
10. Once copied double click anywhere in highlighted black screen to disconnect the
device.
YONO CASH INGENICO MICRO ATM IMPLEMENTATION MANUAL | Jun, 2019
12