Professional Documents
Culture Documents
Step 1: Disable TSEC for all ISLO Process. Execute below Commands one by one and check EMS:
DELIV P P1R^IS,/ALTER TSEC DISABLE SECDEV01/
DELIV P P1R^IS2,/ALTER TSEC DISABLE SECDEV01/
DELIV P P1R^IS3,/ALTER TSEC DISABLE SECDEV01/
DELIV P P1R^IS4,/ALTER TSEC DISABLE SECDEV01/
DELIV P P1S^IS1,/ALTER TSEC DISABLE SECDEV01/
DELIV P P1S^IS2,/ALTER TSEC DISABLE SECDEV01/
DELIV P P1S^IS3,/ALTER TSEC DISABLE SECDEV01/
DELIV P P1S^IS4,/ALTER TSEC DISABLE SECDEV01/
Step 2: Reset statistic of station RAM. Execute below Commands to Reset Station:
RESETSTAT S *RAM*,RADDR 1500:10.204.5.175
Step 3: Once all SECDEV are disabled. STOP HSM Station. Execute below Commands to STOP RAM
Station:
STOP S *RAM*,RADDR 1500:10.204.5.175
Step 4: Check if all HSM station are Stopped. Execute below Commands to check STATUS HSM:
STATUS S *RAM*,RADDR 1500:10.204.5.175
Step 6: Once HSM is Up and Operable. Start HSM Station. Execute below Commands to START HSM:
START S *RAM*,RADDR 1500:10.204.5.175
Step 7: Check if all HSM Station are Started. Execute below Commands to check START HSM:
STATUS S *RAM*,RADDR 1500:10.204.5.175
Step 8: Once all PROCESS are REFRESH. STOP and START RAM Process. Execute below Commands
to STOP and START RAM process (Paralel in two NCPCOM screen):
STOP P *RAM*,ONEATATIME
START P *RAM*,ONEATATIME
Step 9: Check STATUS of RAM process. Execute below Commands to check Status RAM Process and
Check EMS (If the RAM process not IDLE, Do step 8 and then go to step 9):
DELIVER P *RAM*,/STATUS/,ONEATATIME
Step 11: Check STATITISTICS of RAM Station. Execute below Commands to check StATISTICS of
RAM Station:
STATIS S *RAM*,RADDR 1500:10.204.5.175
Step 12: Check STATUS DEVICE of ISLO Process. Execute below Commands to check STATUS
DEVICE of ISLO Process:
DELIV P P1R^IS,/STATUS TSEC SECDEV01/
DELIV P P1R^IS2,/STATUS TSEC SECDEV01/
DELIV P P1R^IS3,/STATUS TSEC SECDEV01/
DELIV P P1R^IS4,/STATUS TSEC SECDEV01/
DELIV P P1S^IS1,/STATUS TSEC SECDEV01/
DELIV P P1S^IS2,/STATUS TSEC SECDEV01/
DELIV P P1S^IS3,/STATUS TSEC SECDEV01/
DELIV P P1S^IS4,/STATUS TSEC SECDEV01/
Step 1: Disable TSEC for all ISLO Process. Execute below Commands one by one and check EMS:
DELIV P P1R^IS,/ALTER TSEC DISABLE SECDEV02/
DELIV P P1R^IS2,/ALTER TSEC DISABLE SECDEV02/
DELIV P P1R^IS3,/ALTER TSEC DISABLE SECDEV02/
DELIV P P1R^IS4,/ALTER TSEC DISABLE SECDEV02/
DELIV P P1S^IS1,/ALTER TSEC DISABLE SECDEV02/
DELIV P P1S^IS2,/ALTER TSEC DISABLE SECDEV02/
DELIV P P1S^IS3,/ALTER TSEC DISABLE SECDEV02/
DELIV P P1S^IS4,/ALTER TSEC DISABLE SECDEV02/
Step 2: Reset statistic of station RAM. Execute below Commands to Reset Station:
RESETSTAT S *RAM*,RADDR 1500:10.204.5.173
Step 3: Once all SECDEV are disabled STOP HSM Station. Execute below Commands to STOP RAM
Station:
STOP S *RAM*,RADDR 1500:10.204.5.173
Step 4: Check if all HSM station are Stopped. Execute below Commands to check STATUS HSM:
STATUS S *RAM*,RADDR 1500:10.204.5.173
Step 6: Once HSM is Up and Operable. Start HSM Station. Execute below Commands to START HSM:
START S *RAM*,RADDR 1500:10.204.5.173
Step 7: Check if all HSM Station are Started. Execute below Commands to check START HSM:
STATUS S *RAM*,RADDR 1500:10.204.5.173
Step 8: Once all PROCESS are REFRESH. STOP and START RAM Process. Execute below Commands
to STOP and START RAM process (Paralel in two NCPCOM screen):
STOP P *RAM*,ONEATATIME
START P *RAM*,ONEATATIME
Step 9: Check STATUS of RAM process. Execute below Commands to check Status RAM Process and
Check EMS (If the RAM process not IDLE, Do step 8 and then go to step 9):
DELIVER P *RAM*,/STATUS/,ONEATATIME
Step 10: Enable TSEC for all ISLO Process. Execute below Commands one by one and check EMS:
DELIV P P1R^IS,/ALTER TSEC ENABLE SECDEV02/
DELIV P P1R^IS2,/ALTER TSEC ENABLE SECDEV02/
DELIV P P1R^IS3,/ALTER TSEC ENABLE SECDEV02/
DELIV P P1R^IS4,/ALTER TSEC ENABLE SECDEV02/
DELIV P P1S^IS1,/ALTER TSEC ENABLE SECDEV02/
DELIV P P1S^IS2,/ALTER TSEC ENABLE SECDEV02/
DELIV P P1S^IS3,/ALTER TSEC ENABLE SECDEV02/
DELIV P P1S^IS4,/ALTER TSEC ENABLE SECDEV02/
Step 11: Check STATITISTICS of RAM Station. Execute below Commands to check StATISTICS of
RAM Station:
STATIS S *RAM*,RADDR 1500:10.204.5.173
Step 12: Check STATUS DEVICE of ISLO Process. Execute below Commands to check STATUS
DEVICE of ISLO Process:
DELIV P P1R^IS,/STATUS TSEC SECDEV02/
DELIV P P1R^IS2,/STATUS TSEC SECDEV02/
DELIV P P1R^IS3,/STATUS TSEC SECDEV02/
DELIV P P1R^IS4,/STATUS TSEC SECDEV02/
DELIV P P1S^IS1,/STATUS TSEC SECDEV02/
DELIV P P1S^IS2,/STATUS TSEC SECDEV02/
DELIV P P1S^IS3,/STATUS TSEC SECDEV02/
DELIV P P1S^IS4,/STATUS TSEC SECDEV02/