Professional Documents
Culture Documents
DESIGN CALCULATION
==========================================================================
==========================================================================
Configuration Directives:
Element To Node 20
Description
--------------------------------------------------------------------
Element To Node 30
Description
Detail ID N4
Nozzle Schedule 60
Detail ID N3
Detail ID N2
Detail ID N1
--------------------------------------------------------------------
Element To Node 40
Description
XY Coordinate Calculations
| | | | | |
--------------------------------------------------------------
---------------------------------------------------------------------------
----------------------------------------------------------------------------
= (30.461*55.3681*0.994)/(2*20000.00*1.00-0.2*30.461)
Note: The thickness required was less than the Code Minimum, therefore
the Code Minimum value of 0.0938 in. per UG-16 will be used.
= (2*20000.00*1.00*0.3474)/(0.994*55.3681+0.2*0.3474)
= 252.196 psig
= (2*20000.00*1.00*0.4724)/(1.000*55.1181+0.2*0.4724)
= 342.270 psig
= (P*(Kcor*D+0.2*t))/(2*E*t)
= (30.461*(0.994*55.3681+0.2*0.3474))/(2*1.00*0.3474)
= 2415.683 psi
= (30.461*27.6841)/(20000.00*1.00-0.6*30.461)+0.125
= 0.167 in.
= 249.128 psig
= 0.994020
= (30.461*27.6841)/(20000.00*1.00-0.6*30.461)
Note: The thickness required was less than the Code Minimum, therefore
the Code Minimum value of 0.0938 in. per UG-16 will be used.
PV Elite 2015 Licensee: SPLM Licensed User 17
FileName : LPSH_Rendeng
Internal Pressure Calculations : Step: 3 8:29am Aug 29,2019
= (20000.00*1.00*0.3474)/(27.6841+0.6*0.3474)
= 249.128 psig
= (20000.00*1.00*0.4724)/(27.5591+0.6*0.4724)
= 339.367 psig
= (P*(R+0.6*t))/(E*t)
= (30.461*(27.6841+0.6*0.3474))/(1.00*0.3474)
= 2445.427 psi
= (30.461*55.3681*0.994)/(2*20000.00*1.00-0.2*30.461)
Note: The thickness required was less than the Code Minimum, therefore
the Code Minimum value of 0.0938 in. per UG-16 will be used.
= (2*20000.00*1.00*0.3474)/(0.994*55.3681+0.2*0.3474)
= 252.196 psig
= (2*20000.00*1.00*0.4724)/(1.000*55.1181+0.2*0.4724)
= 342.270 psig
= (P*(Kcor*D+0.2*t))/(2*E*t)
= (30.461*(0.994*55.3681+0.2*0.3474))/(2*1.00*0.3474)
= 2415.683 psi
= (30.461*27.6841)/(20000.00*1.00-0.6*30.461)+0.125
= 0.167 in.
= 249.128 psig
= 0.994020
Please note that Nozzle, Shell, Head, Flange, etc MAWPs are all considered
when determining the hydrotest pressure for those test types that are based
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
Minimum 1.000
----------------------------------------------------------------------
----------------------------------------------------------------------
Minimum 1.000
PV Elite 2015 Licensee: SPLM Licensed User 21
FileName : LPSH_Rendeng
Internal Pressure Calculations : Step: 3 8:29am Aug 29,2019
= (25.050*55.3681*0.994)/(2*20000.00*1.00-0.2*25.050)
= ((2*20000.00*1.00*0.3474)/(0.994*55.3681+0.2*0.3474))/1.67
= 151.016 psig
= 80.450 psig
= (25.050*55.3681*0.994)/(2*20000.00*1.00-0.2*25.050)
= ((2*20000.00*1.00*0.3474)/(0.994*55.3681+0.2*0.3474))/1.67
= 151.016 psig
= 80.450 psig
---------------------------------------------------------------------------
----------------------------------------------------------------
Minimum 22.761
-------------------------------------------------------------------
---------------------------------------------------------------------------
---------------------------------------------------------------------------
Weight of Details
-------------------------------------------------
---------------------------------------------------------------
Weight Summation
------------------------------------------------------------------------------
PV Elite 2015 Licensee: SPLM Licensed User 27
FileName : LPSH_Rendeng
Element and Detail Weights : Step: 5 8:29am Aug 29,2019
------------------------------------------------------------------------------
Note: The shipping total has been modified because some items have
Weight Summary
Note: The Corroded Weight and thickness are used in the Horizontal
| | Surface |
From| To | Area |
| | in² |
----------------------------
-----------------------------------------------------
psig psig °F
----------------------------------------------------------------------------
----------------------------------------------------------------------------
Note: Large Diameter Flange ratings per ANSI B16.47 2011 edition.
Material SA-106 B
Groove weld depth between Nozzle and Vessel Wgnv 0.5906 in.
Groove weld depth between Pad and Nozzle Wgpn 0.3937 in.
| |
| |
| |
| |
| |
PV Elite 2015 Licensee: SPLM Licensed User 33
FileName : LPSH_Rendeng
Nozzle Calcs. : N4 Nozl: 5 8:29am Aug 29,2019
__________/|\ |
____/|__________\|_\|
| |
| |
|____________________|
= (30.46*27.6841)/(20000*1.00-0.6*30.46)
= 0.0422 in.
= (30.46*7.00)/(17100*1.00-0.6*30.46)
= 0.0125 in.
Required Nozzle thickness under External Pressure per UG-28 : 0.0372 in.
Normal to Vessel Wall (Thickness Limit), pad side Tlwp 0.8686 in.
= 1.000
= min( 1, Sn/S )
= min( 1, 17100.0/20000.0 )
= 0.855
= min( 1, Sp/S )
= min( 1, 20000.0/20000.0 )
= 1.000
= 0.855
= 0.5(14.0000*0.2938*1+2*0.5906*0.2938*1*(1-1.00))
= 2.057 in²
= 0.751 in²
= 0.822 in²
= Wo²*fr3+(Wi-can/0.707)²*fr2+Wp²*fr4
= 0.232 in²
= (min(Dp,DL)-(Nozzle OD))*(min(tp,Tlwp,te))*fr4
= 0.818 in²
= 0.2188 in.
= max( ta, tb )
= 0.2188 in.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
Note: Using the minimum value from (b)(1)(b) and (b)(1)(c) above
Weld Strength and Weld Loads per UG-41.1, Sketch (a) or (b)
= ( Ar - A1 )* Sv
= 26113.07 lbf
= (A2+A5+A4-(Wi-Can/.707)²*fr2)*Sv
= 37441.96 lbf
= 78665. lbf
= 87043. lbf
= 138948. lbf
= 162417. lbf
Path 1-1 = 249459 lbf, must exceed W = 26113 lbf or W1 = 37441 lbf
The Cut Length for this Nozzle is, Drop + Ho + H + T : 9.4124 in.
Material SA-106 B
Groove weld depth between Nozzle and Vessel Wgnv 0.0000 in.
Groove weld depth between Pad and Nozzle Wgpn 0.4724 in.
| |
| |
| |
| |
| |
PV Elite 2015 Licensee: SPLM Licensed User 43
FileName : LPSH_Rendeng
Nozzle Calcs. : N3 Nozl: 6 8:29am Aug 29,2019
__________/|\ |
____/|__________\|_\|
| |
| |
|____________________|
= (30.46*27.6841)/(20000*1.00-0.6*30.46)
= 0.0422 in.
= (30.46*10.00)/(17100*1.00-0.6*30.46)
= 0.0178 in.
Required Nozzle thickness under External Pressure per UG-28 : 0.0444 in.
Normal to Vessel Wall (Thickness Limit), pad side Tlwp 0.8686 in.
= 1.000
= min( 1, Sn/S )
= min( 1, 17100.0/20000.0 )
= 0.855
= min( 1, Sp/S )
= min( 1, 20000.0/20000.0 )
= 1.000
= 0.855
= 0.5(20.0000*0.2938*1+2*0.3752*0.2938*1*(1-1.00))
= 2.938 in²
= 1.073 in²
= 0.491 in²
= Wo²*fr3+(Wi-can/0.707)²*fr2+Wp²*fr4
= 0.232 in²
= (min(Dp,DL)-(Nozzle OD))*(min(tp,Tlwp,te))*fr4
= 1.339 in²
= 0.2188 in.
= max( ta, tb )
= 0.2188 in.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
Note: Using the minimum value from (b)(1)(b) and (b)(1)(c) above
Weld Strength and Weld Loads per UG-41.1, Sketch (a) or (b)
= ( Ar - A1 )* Sv
= 37304.38 lbf
= (A2+A5+A4-(Wi-Can/.707)²*fr2)*Sv
= 41244.34 lbf
= 107524. lbf
= 118932. lbf
= 227906. lbf
Path 1-1 = 118931 lbf, must exceed W = 37304 lbf or W1 = 41244 lbf
The Cut Length for this Nozzle is, Drop + Ho + H + T : 10.3740 in.
Material SA-106 B
Groove weld depth between Nozzle and Vessel Wgnv 0.0000 in.
Groove weld depth between Pad and Nozzle Wgpn 0.4724 in.
| |
| |
| |
| |
| |
PV Elite 2015 Licensee: SPLM Licensed User 52
FileName : LPSH_Rendeng
Nozzle Calcs. : N2 Nozl: 7 8:29am Aug 29,2019
__________/|\ |
____/|__________\|_\|
| |
| |
|____________________|
= (30.46*27.6841)/(20000*1.00-0.6*30.46)
= 0.0422 in.
= (30.46*18.00)/(17100*1.00-0.6*30.46)
= 0.0321 in.
Required Nozzle thickness under External Pressure per UG-28 : 0.0619 in.
Normal to Vessel Wall (Thickness Limit), pad side Tlwp 0.8686 in.
= 1.000
= min( 1, Sn/S )
= min( 1, 17100.0/20000.0 )
= 0.855
= min( 1, Sp/S )
= min( 1, 20000.0/20000.0 )
= 1.000
= 0.855
= 0.5(36.0000*0.2938*1+2*0.3752*0.2938*1*(1-1.00))
= 5.288 in²
= 1.931 in²
= 0.465 in²
= Wo²*fr3+(Wi-can/0.707)²*fr2+Wp²*fr4
= 0.232 in²
= (min(Dp,DL)-(Nozzle OD))*(min(tp,Tlwp,te))*fr4
= 2.678 in²
= 0.2188 in.
= max( ta, tb )
= 0.2188 in.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
Note: Using the minimum value from (b)(1)(b) and (b)(1)(c) above
Normal to Vessel Wall (Thickness Limit), pad side Tlwp 0.8686 in.
Note: The Nozzle does not fall within the scope of the diameter requirements
Weld Strength and Weld Loads per UG-41.1, Sketch (a) or (b)
= ( Ar - A1 )* Sv
= 67147.89 lbf
= (A2+A5+A4-(Wi-Can/.707)²*fr2)*Sv
= 67508.14 lbf
= 190432. lbf
= 214832. lbf
PV Elite 2015 Licensee: SPLM Licensed User 59
FileName : LPSH_Rendeng
Nozzle Calcs. : N2 Nozl: 7 8:29am Aug 29,2019
= 403637. lbf
Path 1-1 = 214831 lbf, must exceed W = 67147 lbf or W1 = 67508 lbf
The Cut Length for this Nozzle is, Drop + Ho + H + T : 15.3664 in.
Material SA-106 B
Groove weld depth between Nozzle and Vessel Wgnv 0.0000 in.
Groove weld depth between Pad and Nozzle Wgpn 0.3937 in.
| |
| |
| |
| |
| |
PV Elite 2015 Licensee: SPLM Licensed User 62
FileName : LPSH_Rendeng
Nozzle Calcs. : N1 Nozl: 8 8:29am Aug 29,2019
__________/|\ |
____/|__________\|_\|
| |
| |
|____________________|
= (30.46*27.6841)/(20000*1.00-0.6*30.46)
= 0.0422 in.
= (30.46*8.00)/(17100*1.00-0.6*30.46)
= 0.0143 in.
Required Nozzle thickness under External Pressure per UG-28 : 0.0393 in.
Normal to Vessel Wall (Thickness Limit), pad side Tlwp 0.8686 in.
= 1.000
= min( 1, Sn/S )
= min( 1, 17100.0/20000.0 )
= 0.855
= min( 1, Sp/S )
= min( 1, 20000.0/20000.0 )
= 1.000
= 0.855
= 0.5(16.0000*0.2938*1+2*0.3752*0.2938*1*(1-1.00))
= 2.350 in²
= 0.858 in²
= 0.499 in²
= Wo²*fr3+(Wi-can/0.707)²*fr2+Wp²*fr4
= 0.232 in²
= (min(Dp,DL)-(Nozzle OD))*(min(tp,Tlwp,te))*fr4
= 0.837 in²
= 0.2188 in.
= max( ta, tb )
= 0.2188 in.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
Note: Using the minimum value from (b)(1)(b) and (b)(1)(c) above
Weld Strength and Weld Loads per UG-41.1, Sketch (a) or (b)
= ( Ar - A1 )* Sv
= 29843.51 lbf
= (A2+A5+A4-(Wi-Can/.707)²*fr2)*Sv
= 31353.95 lbf
= 86797. lbf
= 92666. lbf
= 153311. lbf
Path 1-1 = 92666 lbf, must exceed W = 29843 lbf or W1 = 31353 lbf
The Cut Length for this Nozzle is, Drop + Ho + H + T : 9.6499 in.
Nozzle Schedule:
------------------------------------------------------------------------------
In Plane Shell Thickness. This value does not include weld gaps,
Width of Pad = (Pad Outside Dia. (per above) - Nozzle Outside Dia.)/2
For hub nozzles, the thickness and diameter shown are those of the smaller
------------------------------------------------------------------------------
Note: The Outside projections below do not include the flange thickness.
----------------------------------------------------------------------------
---------------------------------------------------------------------------
---------------------------------------------------------------------------
Note: MAWPs (Internal Case) shown above are at the High Point.
ll - Arc length along the inside vessel surface in the long. direction.
lc - Arc length along the inside vessel surface in the circ. direction
The Centerline Dist. is 31.50 while the sum of the limit Radii is 34.00
The Centerline Dist. is 47.24 while the sum of the limit Radii is 56.00
The Centerline Dist. is 43.31 while the sum of the limit Radii is 52.00
Notes °F °F °F in.
----------------------------------------------------------------------------
----------------------------------------------------------------------------
Notes:
Notes:
Impact test temps were not entered in and not considered in the analysis.
UCS-66(g) applies to materials impact tested per UG-84.1 General Note (c).
---------------------------------------------------------------------
-----------------------------------------------------------------------
Weights:
Listed below are the known problem areas for the current design. If
one or more of the design flags are turned on, please re-run the analysis.
Some of these issues may be resolved when using updated input values.