Professional Documents
Culture Documents
Bookmarks X
*This document is best viewed at a
Options
screen resolution of 1024 X 768.
Features
Cover Page
To set your screen resolution do the following:
Tables RIGHT CLICK on the DESKTOP.
Component Select PROPERTIES.
Connector
CLICK the SETTINGS TAB.
Schematic
Machine Views
MOVE THE SLIDER under SCREEN RESOLUTION
Chassis View until it shows 1024 X 768.
Cab View CLICK OK to apply the resolution.
Engine View
*Due to different monitor sizes and PDF reader preferences
The Bookmarks panel will allow you to there may be some variance in linked schematic locations
quickly navigate to points of interest.
EC-C1
When only one callout is showing on a
machine view, clicking on this button will
Click on any text that is BLUE and make all of the callouts visible. This
underlined. These are hyperlinks button is located in the top right corner
that can be used to navigate the of every machine view page.
schematic and machine views.
FUNCTION KEYS
Switch Switch Switch Switch Circuit Breaker
or Motor Variability
CHECK
Control
ACCUMULATORS Unidirectional Bidirectional
Valves
Line Restriction
(Variable)
VARIABLE DISPLACEMENT
Basic Spring Shuttle NON- COMPENSATED
Pilot
Symbol Loaded Line Restriction
Controlled Spring Loaded Gas Charged Restriction
(Fixed)
Unidirectional Bidirectional
MAIN AUX.
Line Restriction
PILOT CONTROL 2-Section
RELEASED PRESSURE ROTATING SHAFTS Variable and Pressure
Compensated
Pump
Unidirectional Bidirectional
External Return Internal Return
Attachment Pump: Variable and
REMOTE SUPPLY PRESSURE Pressure Compensated
COMBINATION CONTROLS
LINES MEASUREMENT
Solenoid Solenoid Solenoid Solenoid and Servo Thermal Detent Crossing Joining
or Manual and Pilot Pilot or Manual Pressure Temperature Flow
Push-pull Lever Manual Shutoff General Manual Push Button Pedal Spring Vented Pressurized Return Above Fluid Level Return Below Fluid Level
Reed Switch: A switch whose contacts are controlled by a magnet. A magnet closes the contacts of Harness Connector Serialization Code: The "C" stands for
"Connector" and the number indicates which connector in the
a normally open reed switch; it opens the contacts of a normally closed reed switch.
harness (C1, C2, C3, ...)
L-C12
Sender: A component that is used with a temperature or pressure gauge. 3E-5179
The sender measures the temperature or pressure.
T Its resistance changes to give an indication to the gauge of the temperature or pressure. 5A
Component
Relay (Magnetic Switch): A relay is an electrical component that is activated by electricity. Fuse (5 Amps) 9X-1123 Part Number
It has a coil that makes an electromagnet when current flows through it.
The electromagnet can open or close the switch part of the relay. 325-AG135 PK-14
Harness identification code:
This example indicates wire group 325, Wire Gauge
Solenoid: A solenoid is an electrical component that is activated by electricity. wire 135 in harness "AG". Wire Color
It has a coil that makes an electromagnet when current flows through it.
The electromagnet can open or close a valve or move a piece of metal that can do work. 1 Deutsch connector: Typical representation
of a Deutsch connector. The plug contains all
2 sockets and the receptacle contains all pins.
Magnetic Latch Solenoid: An electrical component that is activated by electricity and held latched by a
permanent magnet. It has two coils (latch and unlatch) that make electromagnet 1 Sure-Seal connector: Typical representation
when current flows through them. It also has an internal switch that places of a Sure-Seal connector. The plug and receptacle
2 contain both pins and sockets.
the latch coil circuit open at the time the coil latches.
M0099670
December 2018
© 2018 Caterpillar CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow”, and the POWER EDGE trade dress as well as
All Rights Reserved corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
COMPONENT LOCATION
Page 1 of 3
Schematic Machine
Description Part Number
Location Location
IMPLEMENT SYSTEM
Accumulator Gp - Hydraulic (Pilot) 355-9981 E-7 1
Accumulator Gp - Ride Control 1 460-3921 D-3 2
Accumulator Gp - Ride Control 2 460-3922 D-3 3
Breather As (Hydraulic Tank) 312-2684 A-13 4
Connector As - Orifice 166-4057 B-7 5
Cylinder Gp - Lift (LH) 494-5323 E-5 6
Cylinder Gp - Lift (RH) 489-4697 E-5 7
Cylinder Gp - Tilt
482-9215
950 Tilt Cylinder (Standard)
482-9216
962 Tilt Cylinder (Standard) E-7 8
482-9217
Tilt Cylinder - High Lift
482-9218
Tilt Cylinder - Logger
Filter Element - Oil 376-1288 A-12 9
Filter Gp - Oil - Hydraulic Tank Return 376-1286 A-12 10
Manifold Gp - Control (Ride Control) 497-9386 B-3 11
Pump Gp - Piston (Implement) 468-3837 C-12 12
Screen As - Hydraulic Tank 380-8484 A-13 13
Sensor - Pressure (Implement Pump) (Discharge) 344-7391 B-4 14
Sensor Gp - Pressure (Pcs Attachment) (Lift Cylinder HE and RE) 349-1178 E-3 15
Tank Gp - Hydraulic 563-1304 A-13 16
Valve As - Check (LS Boost Cracking Pressure) (Implement) 123-4750 H-5 17
Valve As - Check (Ride Control Pump) 123-4750 B-4 18
Valve Gp Solenoid (Ride Control) (Balance/Charge) 397-9397 C-3 19
Valve Gp - Check & Relief (Auxiliary Function) 9T-1573 J-3 20
Valve Gp - Check (Backpressure) 349-8844 C-8 21
Valve Gp - Check (Implement Pilot) 6E-4701 D-7 22
Valve Gp - Check (Pilot Operated) (Lift) 445-6109 D-5 23
Valve Gp - Check (Pilot Operated) (Tilt) 445-6109 D-7 24
Valve Gp - Control (Auxiliary, Third Function) 445-4988 J-4 25
Valve Gp - Main Control
463-8679
2 Function Implement Valve Non - Ride Control Offering
451-5878 E-4 26
2 Function Implement Valve With Ride Control (Attachment)
451-5876
2 Function Implement Valve With Ride Control - Logger (Attachment)
Valve Gp - Makeup 234-4869 D-5 27
Valve Gp - Pressure Reducing 367-8969 D-8 28
Valve Gp - Relief (Load Signal) 375-3788 B-7 29
Valve Gp - Relief (Margin) 370-5764 C-7 30
Valve Gp - Relief (Pressure Limiter (Auxiliary Function)) 371-1784 H-4 31
Valve Gp - Relief (Pressure Limiter) 455-5822 C-3 32
Valve Gp - Relief (Ride Control) (PED) 445-8805 C-4 33
Valve Gp - Relief (Tilt - Head) 451-6644 E-6 34
Valve Gp - Relief (Tilt - Rod) 332-1987 E-6 35
Valve Gp - Solenoid (Implement Pilot Shutoff) 333-8242 D-7 36
COMPONENT LOCATION
Page 2 of 3
Schematic Machine
Description Part Number
Location Location
IMPLEMENT SYSTEM
Valve Gp - Solenoid (Implement Valve - Lift Dump) 313-7668 B-6 37
Valve Gp - Solenoid (Implement Valve - Lift Lower/Float) 313-7668 B-5 38
Valve Gp - Solenoid (Implement Valve 3Rd Function Port A) 313-7668 I-3 39
Valve Gp - Solenoid (Implement Valve 3Rd Function Port B) 313-7668 H-3 40
Valve Gp - Solenoid (Rack Back) 313-7668 D-6 41
Valve Gp - Solenoid (Raise) 313-7668 D-5 42
Valve Gp - Solenoid (Ride Control) (Activation) 277-8863 D-5 43
Valve - Ball (Manual Lower (Dead Engine)) 112-1817 E-3 44
Valve - Control (Anti - Drift Seat) (Lift) 356-8561 D-5 45
Valve - Control (Anti - Drift Seat) (Tilt) 356-8561 D-7 46
Steering System
Cylinder Gp - Steering (LH) 395-0394 F-9 47
Cylinder Gp - Steering (RH, LH) 359-6706 F-9 48
Pump Gp - HMU Metering Pump 349-6093 E-12 49
Pump Gp - Piston (Steering) 455-1846 C-11 50
Pump/Motor Gp - Electric Drive (Secondary Steering) (Attachment) 378-4323 C-10 51
419-5574 D-12 52
Sensor Gp - Pressure (Secondary Steering)
344-7391 D-12 53
Valve Gp - Relief Steering (Pump Backup) 376-0631 E-11 54
Valve Gp - Secondary Steering Check Valve (With Manifold) 396-9028 D-12 55
Valve Gp - HMU Steering 441-3485 F-11 56
Valve Gp - Relief (Steering Cross Over) 129-8222 F-10 57
Valve Gp - Steering Neutralizer (HMU) 296-5662 F-12 58
Fan/Brake System
Accumulator Gp - Brake 375-2801 E-15 59
Core As - Hydraulic Oil Cooler 508-6324
E-16 60
Core As - Hydraulic Oil Cooler (Attachment) 511-7594
Filter Gp - Oil (Kidney Loop) 436-3444 C-15 61
Manifold Gp - Control Fan Drive And Brake Charge Valve (Non - CE 458-2253
C-14 62
Certified) 467-3049
Motor Gp - Gear (Fan) 491-9530 D-16 63
Pump Gp - Piston (Fan) 399-5055
B-14 64
Pump Gp - Piston (Fan With LS Bypass (Attachment)) 430-9006
Sensor Gp - Pressure Brake Accumulator 344-7391 D-15 65
Valve As - Control (Thermal Bypass) 516-7103 D-16 66
Valve - Sampling 8C-3446 E-16 67
Quick Coupler System
Cylinder Gp - Coupler (Attachment) 311-1463 G-2 68
Valve And Mounting Gp - Coupler (Attachment) 416-4796 G-3 69
Valve As - Check (LS Boost Cracking Pressure) (QC) 123-4750 G-4 70
COMPONENT LOCATION
Page 3 of 3
Schematic Machine
Description Part Number
Location Location
Fan/Brake System
Valve - Ball Manual Shutoff (Quick Coupler) 112-1817 G-3 71
Miscellaneous
Manifold Gp - Control (Axle Oil Flow Divider) 237-8180 F-16 72
Pump Gp - Gear (Transmission) 362-9554 C-11 73
Valve Gp - Solenoid And Pressure Reducing Auto Differential Lock 371-4745 E-14 74
Valve Gp - Solenoid Front (Differential Lock) (Attachment) 385-7261 B-8 75
Brake
Brake Gp - Parking 436-5961 H-11 76
Control Gp - Service Brake 371-5010 I-13 77
Sensor As - Temperature (Front Axle) 264-4297 I-16 78
Sensor As - Temperature (Rear Axle) 264-4297 H-16 79
Sensor Gp - Position 266-1466 I-14 80
Sensor Gp - Pressure (Service Brake) 296-5270 H-10 81
Switch As - Limit (Brake Pedal) 105-6117 I-14 82
Valve Gp - Brake Control (Service) 375-2814 I-13 83
Valve Gp - Solenoid (Parking Brake) 545-7861 G-12 84
TAP LOCATION
Tap Schematic
Description
Number Location
B Front Brake Pressure H-14
C Rear Brake Pressure H-14
G1 Fan Pump Discharge Gauge Port C-15
G2 Fan Pump Load Sense Gauge Port C-14
G3 Implement Pilot Supply Gauge Port B-8
G4 Brake Accumulator Gauge Port D-15
G5* Implement Pump Discharge Gauge Port C-9
G6 Implement Pump Load Sense Gauge Port B-8
G7 Differential Lock Pressure - Front C-8
G8 Differential Lock Pressure - Rear E-14
G9 Steering Pump Discharge Gauge Port - HMU D-12
G10 Steering Pump Load Sense Port - HMU E-13
G11 Quick Coupler Supply Gauge Port F-5
G12 Air Bleed Port A-16
SOS Oil Sample Port E-16
* Not shown
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
3RD FUNCTION ATTACHMENT
(OUT-BOARD LINES ON BOOM)
PORT B
LEVER FORWARD
RIGHT HAND LINE ON BOOM
RIGHT HAND PORT AND SOLENOID ON VALVE
(80) SENSOR GP
POSITION (82) SWITCH AS - LIMIT
FRONT AXLE 266-1466 (BRAKE PEDAL) (39) VALVE GP
(78) SENSOR GP SOLENOID
105-6117 (77) CONTROL GP
TEMP (FRONT AXLE) 313-7668 IMPLEMENT VALVE
SERVICE BRAKE 3RD FUNCTION
264-4297 PORT A
TO BRAKE 371-5010
DIFFERENTIAL LIGHTS
LOCK
I TO TRANSMISSION CONTROL
I
(83) VALVE GP
T BRAKE CONTROL (17) VALVE AS - CHECK
NOTE E
NO
(SERVICE) LS BOOST
DIFFERENTIAL
OIL TEMP 375-2814 CRACKING PRESSURE
WARNING
NC
123-4750 P
C C
B
PORT A
DIFFERENTIAL OIL LS
TEMP WARNING
C
HOLD
SOLENOID
313-7668
237-8180
P PA
G8 A T (49) PUMP GP
(7) CYLINDER GP (6) CYLINDER GP (26) VALVE GP (44) VALVE - BALL
(67) VALVE HMU METERING A (8) CYLINDER GP-TILT
L R
LIFT(RH) LIFT (LH) MAIN CONTROL MANUAL LOWER
(60) CORE AS SAMPLING 349-6093 482-9215 (950 STANDARD)
489-4697 494-5323 IMPLEMENT PUMP (DEAD ENGINE)
OIL COOLER 8C-3446 (74) VALVE GP 482-9216 (962 STANDARD)
P
482-9217 (HIGH LIFT) 463-8679 112-1817
HYDRAULIC (59) ACCUMULATOR GP SOLENOID REAR
E 508-6324 (1) ACCUMULATOR GP 482-9218 (LOGGER) 2 FUNCTION IMPLEMENT VALVE E
BRAKE (AUTO DIFFERENTIAL LOCK) (15) SENSOR GP
511-7594 (ATTCH) SOS HMU HYDRAULIC NON-RIDE CONTROL OFFERING
375-2801 (ATTACHMENT) LIFT
PRESSURE
(PILOT) RACK (ATTACHMENT)
371-4745 451-5878 (PCS ATTACHMENT)
355-9981
T
LOWER
2 FUNCTION IMPLEMENT VALVE LIFT CYLINDER
G10 DUMP
HE AND RE
(65) SENSOR GP
LS (23) VALVE GP WITH RIDE CONTROL-LOGGER
(36) VALVE GP - SOLENOID (24) VALVE GP - CHECK (35) VALVE GP (34) VALVE GP CHECK
(ATTACHMENT) 349-1178
PRESSURE T P
IMPLEMENT LOCKOUT RELIEF RELIEF (PILOT OPERATED)
(PILOT OPERATED) (TILT-HEAD) 451-5876
BRAKE ACCUMULATOR SHUTOFF
(TILT-ROD) 445-6109
(54) VALVE GP - RELIEF 445-6109
(SECONDARY STEERING) (SECONDARY STEERING) IMPLEMENT PILOT (27) VALVE GP (2) RIDE CONTROL
(66) VALVE AS
344-7391 419-5574 (28) VALVE GP 6E-4701
(41) VALVE GP
(42) VALVE GP MAKEUP ACCUMULATOR 1
CONTROL SOLENOID
SOLENOID 234-4869
(THERMAL BYPASS)
A2 A1
PRESSURE REDUCING 313-7668
313-7668
460-3921
516-7103 367-8969 (43) VALVE GP (3) RIDE CONTROL
RACK BACK RAISE SOLENOID ACCUMULATOR 2
D D
SOLENOID
277-8863
SOLENOID
PS PS 460-3922
(46) VALVE (45) VALVE
CONTROL CONTROL
(ANTI-DRIFT
(63) MOTOR GP G4 (55) VALVE GP (ANTI-DRIFT
SEAT)
SEAT) A.RC
GEAR (FAN) SECONDARY STEERING 356-8561 356-8561 ACTIVATION
SOLENOID
X DL
DIFFERENTIAL LOCK
(11) MANIFOLD GP
S
FRONT AXLE
(37) VALVE GP (38) VALVE GP LINE PATTERNS
(64) PUMP GP L1 L S D
(MANUAL / AUTO)
CONTROL (RIDE CONTROL)
SOLENOID SOLENOID
PISTON (FAN) 497-9386 Pressure Line
313-7668 313-7668
399-5055 IMPLEMENT VALVE - LIFT
(14) SENSOR - PRESSURE Pilot / Load Sensing Pressure
430-9006 (ATCH) DUMP SOLENOID
IMPLEMENT VALVE - LIFT
LOWER/FLOAT SOLENOID (IMPLEMENT PUMP) Drain / Return Lines
(FAN WITH LS BYPASS) (DISCHARGE)
B LS D
(18) VALVE AS - CHECK Air Line B
B (75) VALVE GP - SOLENOID (5) CONNECTOR AS 344-7391
OIL FROM
DR DR PP LS RIDE CONTROL PUMP Component Group
BRAKE PEDAL FRONT (DIFFERENTIAL LOCK) ORIFICE 123-4750
VALVE DRAIN 166-4057
(ATTACHMENT) CALLOUTS
385-7261 YY Taps (Pressure, Sampling, Sensor - by letter)
G3 G6
DL DL D Connectors (By letter)
(4) BREATHER
LI 312-2684 Callout Number Component
S L (Machine Location from (52) VALVE GP - CONTROL Name
Component LocationsTable)
138-1234 Part Number
16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
CAB VIEW
77
82
80
G10 49 83 C B
AXLE VIEW
78 76
FRONT AXLE
REAR AXLE
79
IMPLEMENT VALVE
36 41 42 35 27 15 20 39 25 33 26 45 46 1
17
19
43
22 30 34 5 29 37 38 40 31 20 14 32 11 18 23 24
MACHINE FRONT VIEW
68
MACHINE LEFT SIDE VIEW
81 84
G9
G12
G4
63 64 59 62 61 G2 G1 65
MACHINE TOP VIEW
16
75
58
47
G8
10
74
72
13 48
MISCELLANEOUS VIEW
28 71
G7 G6 G3
A
69
70
G11
44 2 3
RADIATOR VIEW
SOS 67 66 60
STEERING ARRANGEMENT VIEW
51 50 55 12
57 54