PROJECT NAME: DHIRUBHAI AMBANI INTERNATIONAL

CONVENTION AND EXHIBITION CENTRE

(DAICEC) PROJECT

General Power Tools Safety Inspection

SUBJECT:
Checklist

DOCUMENT NO.: 10107-V452-SCT-CO000-0072_00

Initial
0 20 Jul 2017
Submission
Haridas OK Vijayan KG, HSE Head SungYong Um, PM

Rev. Prepared Reviewed Approved

Date Description
No by by by

It may NOT be used, disclosed or reproduced for other purpose pertaining to this document or its contents without specific, written prior
permission of Samsung C&T.
 DAICEC PROJECT
General Power Tools Safety Inspection Checklist 10107-V452-SCT-CO000-0072_00
Equipment Type Month Year
Equipment ID Color Code of the Month
SN. Check Point Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec
1 Power Tool is visually in good condition.
2 Disk / Bit is not cracked/damaged.
3 Wheels fit freely on spindles and threads are in good
condition.
5 Handles have soft insulated grips & not Slippery
6 Checked insulation resistance and found satisfactory.
7 Grinding /Cutting discs are not excessively worn
8 Tool is double insulated and grounded
9 Are the rotating /moving parts guarded or shielded
10 Is the equipment fitted with a Deadman switch
11 The locking mechanism of the bit/disk is in good
condition.
12 All Bolts and nuts are tightened and are no loose parts
13 No hydraulic oil/ pneumatic pressure leakages.
14 No excessive noise and vibration.
15 Bolts and nuts are tightened and are no loose parts
19 Instant trigger control and automatic release for Jack
Hammer
20 There is a locking mechanism on drill bit
21 A hand guard extending from the handle to the body
of the tool is available
22 lug terminals Covered to prevent shorting out by a
metal object
23 Tool is in Usable Condition and Color Coded?
Name of Inspector

Signature

Date Of Inspection
PTO for Remarks
 DAICEC PROJECT
General Power Tools Safety Inspection Checklist 10107-V452-SCT-CO000-0072_00
Details of Maintenance/Repairs Carried Out
Check Defect Observed Date Maintenance/Repair Details Date Status
Point