Professional Documents
Culture Documents
TECHNICAL REPORT
ON
By
Muhammad Salisu
ENG/16/COM/00241
ENG/16/COM/00241
Microsoft word practice document 2019
Table of Contents
1. Introduction ..........................................................................................................................1
2. Construction of a stool ........................................................................................................1
2.1 Materials .........................................................................................................................1
2.2 Tools ...............................................................................................................................1
3. Equations..............................................................................................................................1
List of Figures
List of Tables
i
Microsoft word practice document 2019
1 Introduction
This writing explains the work carried out during my Student Work Experience program
(SWEP). The report gives details of the design, materials and methods applied in the
construction of a stool.
2 Construction of a stool
2.1 Materials
Square tube
Wood
Foam
2.2 Tools
1) Hacksaw
2) File
3) Bench vice
The hand tools used for various operations are shown in Table 1
s. No Operation Tool
1. Cutting Hacksaw
2. Filing Head file
3. Riveting1 Hammer
Filling sharp edges the steel frame is necessary for safety reasons (Adamu 2018)
1
Joining Process
1
Microsoft word practice document 2019
Steel tubes can also be cut using the power hacksaw shown in Figure 1.
Marking out was carried out using the Scriber shown in Figure 2.
Figure 2 A Scriber
2
Microsoft word practice document 2019
The practical was a carried out at the main workshop, department of mechanical engineering.
3
Microsoft word practice document 2019
4
Microsoft word practice document 2019
3 Equations
√
√
√
Where,
[ ] ∑
∫ ∫
4. Reference
Adamu, Jamil. “Design and construction of a Stool.” Journal of Technical Skills, 2018: 23-29.