Professional Documents
Culture Documents
Command:circle
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter]: 3
Command: circle
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter] <3.0000>: 6
Command: _move
Select objects: 1 found
Select objects: 1 found, 1 total
Select objects: 1 found, 1 total
Select objects: 1 found, 2 total
Select objects:
Specify base point or displacement: Specify second point of displacement or
<use first point as displacement>: @-10,-10
Command:circle
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter]: 3
Command:circle
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter] <3.0000>: 6
Command: _move
Select objects: 1 found
Select objects: 1 found, 1 total
Select objects: 1 found, 1 total
Select objects: 1 found, 2 total
Select objects:
Specify base point or displacement: Specify second point of displacement or
<use first point as displacement>: @10,10
Command: _offset
Specify offset distance or [Through] <Through>: Specify second point: 10
Command: _offset
Specify offset distance or [Through] <10.0000>: Specify second point: 22
Command: _offset
Specify offset distance or [Through] <22.0000>: Specify second point: 40
Command: _offset
Specify offset distance or [Through] <40.0000>: 55
Command: _offset
Specify offset distance or [Through] <55.0000>: Specify second point: 75
Command: _offset
Specify offset distance or [Through] <75.0000>: Specify second point: 90
Command: _offset
Specify offset distance or [Through] <75.0000>: Specify second point: 10
Command: _offset
Specify offset distance or [Through] <90.0000>: Specify second point: 15
Command: _offset
Specify offset distance or [Through] <90.0000>: Specify second point: 17
Command: _offset
Specify offset distance or [Through] <90.0000>: Specify second point: 23
Command: _offset
Specify offset distance or [Through] <90.0000>: Specify second point: 32
Command:circle
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter] <6.0000>: 18
Command:circle
Command: _circle Specify center point for circle or [3P/2P/Ttr (tan tan
radius)]:
Specify radius of circle or [Diameter] <4.0000>: 8
Command: _trim
Current settings: Projection=UCS, Edge=None
Select cutting edges ...
Select objects: 1 found
Select objects:
Select object to trim or shift-select to extend or [Project/Edge/Undo]:
Select object to trim or shift-select to extend or [Project/Edge/Undo]: *Cancel*
Command: fillet
Current settings: Mode = TRIM, Radius = 30.0000
Select first object or [Polyline/Radius/Trim]: R
Specify fillet radius <30.0000>: 10
Select first object or [Polyline/Radius/Trim]:
Select second object:
Command: Specify opposite corner: