Professional Documents
Culture Documents
HOBBIES:
OBJECTIVES:
• Reading Books
• Internet Surfing To excel in a competitive environment, become a trump card of a progressive
• Travelling and a dynamic organization, by the virtue of hard work and proper utilization of my
• Football scholastic aptitude.
Profile Summary:
REFERENCE:
• More than 06 years of extensive experience in Lab & Field Testing i.e. Soil,
Aggregate, Concrete, Asphalt and NDT.
Will be furnished on
demand.
Countries of Work Experience : Pakistan & Kingdom of Saudi Arabia
KEY QUALIFICATION:
I have also been conducting Non Destructive Testing on concrete floors for its
pH value and Moisture content, UPV on walls, beams, foundations, slabs, roofs
of concrete for its uniformity and depth of cracks etc. SFRM on walls, steel
structures against fire, plus on aggregate for sand equivalent and soundness,
on cement for its chemical composition, on water for its suitability for use for
concrete batching plant and drinking water purposes.
AREAS OF EXPERTISE
Soil Testing
• Standard Test Method for Particle-Size Analysis of Soils (ASTM D422)
• Standard Test Method for Liquid Limit, Plastic Limit, and Plasticity Index of
Soils (ASTM D4318)
• Standard Practice for Classification of Soils for Engineering Purposes (Unified
Soil Classification System, (ASTM D2487)
• Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for
Highway Construction Purposes ASTM (D3282)
• Standard Test Method for Specific Gravity of Soil Solids by Water Pycnometer
(ASTM D854)
• Standard Test Method for Materials Finer than 75-µm (No. 200) Sieve in
Material Aggregate by Washing (ASTM C117)
• Standard Test Methods for Determining the Amount of Material Finer than 75-
μm (No.200) Sieve in Soils by Washing (ASTM D1140)
• Standard Practice for Reducing Samples of Aggregate to Testing Size
(ASTM C702)
• Standard Practice for Sampling Aggregates (ASTM D75)
• Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
(ASTM C136)
• Standard Test Methods for Laboratory Determination of Water (Moisture)
Content of Soil and Rock by Mass (ASTM D2216)
• Standard Test Methods for Laboratory Compaction Characteristics of Soil
Using Standard Effort (12 400 ft-lbf/ft³(600 kN-m/m³) (ASTM D698)
• Standard Test Methods for Laboratory Compaction Characteristics of Soil
Using Modified Effort (56,000 ft-lbf/ft³(2700 kN-m/m³)) (ASTM D1557)
• Standard Test Method for CBR (California Bearing Ratio) of
Laboratory-Compacted Soils (ASTM D1883)
• Standard Test Methods for Maximum Index Density and Unit Weight of Soils
Using a Vibratory Table (ASTM D4253)
• Standard Test Methods for Minimum Index Density and Unit Weight of Soils
and Calculation of Relative Density (ASTM D4254)
• Standard Test Method for In-Place Density and Water Content of Soil and Soil-
Aggregate by Nuclear Methods (Shallow Depth), (ASTM D6938)
• Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using
Sieve Analysis (ASTM D6913)
Aggregate Testing
Concrete Testing
Asphalt Testing
• Standard Practice for Sampling Bituminous Paving Mixtures (ASTM D979)
• Standard Test Methods for Quantitative Extraction of Bitumen from Bituminous
Paving Mixtures (ASTM D2172).
• Standard Practice for Preparation of Bituminous Specimens Using Marshall
Apparatus (ASTM D6926)
• Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures
(ASTM D6927)
• Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive
Compacted Bituminous Mixtures (ASTM D2726)
• Standard Test Method for Theoretical Maximum Specific Gravity and Density
of Bituminous Paving Mixtures (ASTM D2041)
• Standard Test Method for Thickness or Height of Compacted Bituminous
Paving Mixture Specimens (ASTM C3549)
• Standard Practice for Sampling Compacted Bituminous Mixtures for
Laboratory Testing (ASTM D5361)
• Standard Test Method for Penetration of Bituminous Materials Chemical
Testing (ASTM D5)
• Standard Practice for Estimating Application Rate and Residual Application
Rate of Bituminous Distributors (ASTM D2995)
Field Testing
• Plate Load Test (PLT)
• Field Density Test (FDT, ASTM D6938)
• Standard Test Method for Rebound Number of Hardened Concrete (C805)
• Concrete Field Testing
• UPV (Ultra Sonic Pulse Velocity ASTM C597 )
• LAB Thermal resistivity
• DFT (Dry Film Thickness, ASTM C6132)
• Pull off Adhesion Test (ASTM C7234) (ASTM D4541)
• pH and RH Concrete Moisture Analyzer (ASTM F710, ASTM F2170)
• Standard Test Method for Slump Flow of Self-Consolidating Concrete (C1611)
• Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-
Ring (ASTM 1621)
• Standard Test Method for Static Segregation of Self Consolidating Concrete by
using Column Technique (ASTM 1610)
• SFRM (Sprayed Fire Resistive Materials) Testing ASTM E 605 & E 736
(Thickness, Density & Adhesion Tests)
Activities:
Major Projects:
Major Projects:
Activities:
1) Supervision of routine Laboratory testing on soil, aggregate, asphalt,
concrete, water and steel.
2) Preparation of test reports.
3) Coordinating with clients and consultants representatives.
4) Reviewing/Signing on final reports before submitting to the client.
ACHIVEMENTS
• Successfully achieved organizational goals and objectives through
effective participation as a strategic team member in administration and
supervision.
• Successfully develop and implement standard operating procedure and
internal control procedures focusing on improvement of internal
productivity and optimization of process.
• Gained comprehensive knowledge, intensive training and valuable
experience in the quality civil testing field.
STRENGHTS:
SKILLS:
• One day technical talk on “Mineral and Energy Resources of Pakistan with
Special Emphasis on Punjab” held at Institute of Geology, University of the
Punjab, Quaid-E-Azam Campus, Lahore organized by the PUNJAB
GEOLOGICAL SURVEY SOCIETY on December 5, 2013.
• One day lecture on “Play Fairway Analysis and CRS Mapping” Held on June
18, 2012 at Institute of Geology, University of The Punjab, Lahore.
PERSONAL INFORMATION: