Professional Documents
Culture Documents
MS300 54 PDF
MS300 54 PDF
APPLICATION
기술 표준
ALL 1/4
ENGINEERING STANDARD
ESTABLISHED SPEC No.
POLYMERIC
MATERIAL SPECIFICATION
MATERIALS MS 300-54
RESEARCH TEAM
TITLE:
CONTENTS
1. SCOPE
2. OBJECTS PARTS
4. SAMPLING of SPECIMEN
5. TEST METHOD
6. OTHERS
ISSURE of SPECIFICATION
EMS20065 ALL Aug.14,`02 T.S Lee
(SAME AS EMSR0149)
SYM EO No. DESCRIPTION OF CHANGE REV.PAGE REV.DATE REV.BY
REFERENCE CHECKED
ESTABLISHMENT
기 술 표 준 규격번호 페이지
(SPEC NO) MS 300-54 (SHT/SHTS) 2/4
ENGINEERING STANDARD
PREPARED BY APPROVED
ORIGINAL FILED AT BY BY
IPIS J.Y
(ES/MS MANAGEMENT T.S Maeng Y.S
SYSTEM) Lee Aug/09/`02 Lim
Aug/09/`02 Aug/13/02
1F-SG-00016 HYUNDAI ·KIA
MOTOR
1. SCOPE
The test method defined by this specification is fogging for interior parts.
2. OBJECT PARTS
The object parts of fogging shall be sheet, leather, cloth, mold parts, nonwoven, carpet, foam, pad
and conform to drawing.
3. SAMPLING of SPECIMEN
3.1 Specimen : Specimen shall be sampling at finished product in principle.
4. TEST METHOD
4.1 Specimen state
Specimens shall be allowed to stand at least 24 h in the above normal state before
test.
4.2 Equipment
Use the following equipments.
1) Fogging tester :
An oil bath and breaker with cover as shown in FIG. 1.
2) Measuring instrument(Integral sphere type light transmittance meter) :
A device shown in Fig. 2.
Table 1
Procedure Glass plate Trap fix Standard Read on
fix white plate fix Galvanometer Measurement
1 No No Yes T1(set to 100) Incident light quantity
2 Yes No Yes T2 Total transmitted light quantity
3 No Yes No T3 Scattered light quantity through
device
4 Yes Yes No T4 Scattered light quantity through
device and glass
Calculate the fogging by the following formula, using the average of measurements at three
locations per specimen. The average of three specimens shall be considered as the result.
T4 T3
Fogging(%) = { - } ×100
T2 T1
Fig 1
Fig 2
5. OTHERS