Professional Documents
Culture Documents
Assignment 1: Electrodynamics II
Due Date: April 29, 2020. Time 04:30 PM
Attention:
Copying is strictly prohibited, use your own mind to understand the problems. Late sub-
mission will cost 20% per 24 hours.
Once you solve it scan it by using CAM scanner or Doc Scanner, available on Google Play
store then email the document in PDF file at asifnawaz916@gmail.com with the subject
Electrodynamics II: Assignment I. Don’t forget to write your name and roll number.
1
PHY-508: Electrodynamics II Spring 2020
3. A small circular loop of N turns of wire is oriented so the loop axis is parallel to the
local direction of a magnetic field B. A galvanometer (or other current integrating
device) measures the total amount of charge Q which flows through the circuit of total
resistance R as in Fig. 3. When the coil is flipped its loop axis reverses direction.
Find the relationship between Q and |B| assuming that εF = IR remains valid. This
device, known as a flip coil, is used for quick measurements of magnetic field strength
(Marks:10)
4. Show that electric and magnetic fields produced by a point charge in vacuum which
moves with a constant speed v << c is (Marks:07)
~ r, t) = q ~r − ~v t
E(~ (1)
4πo |~r − ~v t|3
and
~ r, t) = ~v × E(~
B(~ ~ r, t) (2)
c2
~ r̂ = −4πδ(r3 )
∇. (3)
r2
6. A fat wire of radius a carries a constant current I, uniformly distributed over its cross
section. A narrow gap in the wire, of width w << a, forms a parallel-plate capacitor
as shown in Fig.4. Find the magnetic field in the gap at a distance s < a from the
axis. (Marks:10)
2
PHY-508: Electrodynamics II Spring 2020