Professional Documents
Culture Documents
CLASS
B 150
Material: Cryogenic Temperature Rating: 150 Lbs RF
3.5% Ni Steel
Diameter ½ ¾ 1 1½ 2 3 4 6 8 10 12 14 16 18 20 24 32 34 36
Pipes
Non CAF flat gaskets, 2 mm thick for diameters up to 14 inches, and 3 mm thick for diameters above 14 inches or
Gaskets Spiral wound, graphite filler, 4 mm thick 316L SS winding, 3.2 mm thick internal and external centering rings per
ASME B16.20
Bolting Studs A320 L7, Hh nuts A194 Gr 4, zinc-plated / bichromate-treated
Spectacle blind up to 12" and blinders for 14" and above, 3.5% Nickel steel
Miscellaneous
NOTES
(1) Connections to be calculated by ENGINEERING COMPANY (8) Seal materials depending on operating
conditions and fluid characteristics
(2) Bending not permitted
(9) Swivel plug disc
(3) Flanges as per ASME B16.5 for diameters up to 24" and as per
ASME B16.47 Serie ‘A’ for diameters 26" and above (10) Firesafe and Anti-static device
(4) Flexible wedge (11) "Stock finish" facing for use of flat gasket and "Smooth finish"
facing for use of Spiral wound gasket
(5) Removable seat
(6) Service pressure according to temperature and supplier’s
recommendations. Use as per P&ID indications. Maximum (12) Thickness based on mill tolerance
temperature = 180°C
(7) Horizontal installation
PIPING MATERIALS 10053-P-ET-001
CLASS
F 600
Material: Cryogenic temperature Rating:
600 Lbs RF
3.5% Ni steel (Smooth finish)
Diameter ½ ¾ 1 1½ 2 3 4 6 8 10 12 14 16 18 20 24 26 46
Schedule (12) 80 40 80 60 80 60 To be calculated
Ends PE BE
Butterfly valves
800 Lbs SW, A350
A352 LC3 Body, Trim stellite coated for diameters 2" to 4" and F316 for diameters 6" and
LF3, BC, Stellite coated
Check valves (5) (7), Horizontal
above, Dual-Plate (Wafer-Lug type).
Swing type (flanged, BC) is acceptable if density is above 0.7 (3)
piston lift
600 Class, SW, A350 LF3,
Filters Y type, stainless steel strainer
Tee type filters, A420 WPL-3 alloy steel
Spiral wound, graphite filler, 4 mm thick 316L SS winding, 3.2 mm thick internal and external centering rings per
Gaskets ASME B16.20
Miscellaneous Spectacle blind up to 6" and blinders for 8" and above, 3.5% Nickel steel
NOTES
(1) Connections to be calculated by ENGINEERING COMPANY (7) Horizontal installation
(2) Bending not permitted (8) Seal materials depending on operating
conditions and fluid characteristics
(3) Flanges as per ASME B16.5 for diameters up to 24" and as per
ASME B16.47 Serie ‘A’ for diameters 26" and above (9) Swivel plug disc
(4) Flexible wedge (10) Firesafe and Anti-static device
(5) Removable seat (11) "Smooth finish" facing
(6) Service pressure according to temperature and supplier’s
(12) Thickness based on mill tolerance
recommendations. Use as per P&ID indications. Maximum
temperature = 180°C