Professional Documents
Culture Documents
Login
Author Message
Fivestar widget
Total votes: 0
The problem is that the drain voltage should always be larger than the source voltage is order to keep the above
condition. How should I bias the source junction between the MOSFETs?
Tags:
Learning and
Information,
General
Electronics
Top
Log In / Register to post comments
Total votes: 0
Why use a mosfet?
You need to tell us a bit more about what you want to achieve - like voltages, current, frequency etc.
For something like audio, a jfet or a bilateral switch such as a 4066 might be used.
Top
Log In or Register to post comments
tpappano
Total votes: 0
There also are small opto isolated ac relays with fet outputs suitable for switching small ac signals
Top
Log In or Register to post comments
Total votes: 0
it is work with your "GND" must be ref to Source.
http://electronics.stackexchange...(http://electronics.stackexchange.com/questions/150618/using-
two-mosfets-for-ac)
see example.
Level: Resident
Joined: Tue. May 2, 2006 Done this with 230Vac work nice but you have allways on Ron + one Mosfet diode serie, must thing if you want some
Posts: 587 View posts power out.
Location: Norway
Thierry
Thierry Pottier
Top
Log In or Register to post comments
Total votes: 0
Your circuit will work ....... You can use this if you dont care about the losses in the MOSFET + if your system voltage is
Level: Wannabe
Joined: Mon. Nov 9, 2015 very less (<50V), if it is any higher then the mosfets will be too costly.
Posts: 70 View posts
BUT, best candidates to switch AC are TRIAC and THYRISTOR. The control is easier with these devices + the gate can
take a punch before it fails, on the other hand mosfet's gate can be very delicate. A little high voltage pulse to the
GATE will fry the mosfet.
TRIAC and THYRISTOR are relatively cheap devices and usually rated at very high voltages.
Top
Log In or Register to post comments
Total votes: 0
http://www.electronics-tutorials...(http://www.electronics-tutorials.ws/power/thyristor-circuit.html)
http://www.electronics-tutorials...(http://www.electronics-tutorials.ws/power/triac.html)
Top
Log In or Register to post comments
Total votes: 0
Adithya Yuri wrote:
#4 "If you think you need floating point to solve the problem then you don't understand the problem. If you really do need floating point then you
have a problem you do not understand." - Heater's ex-boss
Top
Log In or Register to post comments
Total votes: 0
Top
Log In or Register to post comments
Total votes: 0
Kartman wrote:
#4 "If you think you need floating point to solve the problem then you don't understand the problem. If you really do need floating point then you
have a problem you do not understand." - Heater's ex-boss
Top
Log In or Register to post comments
Brian Fairchild Posted by Brian Fairchild: Wed. Jan 4, 2017 - 12:08 PM #10
Total votes: 0
Posting that made me wonder if there was ever a '300 Circuits'. It turns out there was and I now have a copy on the
way (there's also 311 Circuits which I have electronically).
Level: Raving Lunatic
Joined: Thu. Oct 18,
2001
Posts: 4211 View posts
Location: Eastern
England. #1 This forum helps those that help themselves
#4 "If you think you need floating point to solve the problem then you don't understand the problem. If you really do need floating point then you
have a problem you do not understand." - Heater's ex-boss
Top
Log In or Register to post comments
Jump To
--General Electronics
Privacy
Contact
Site Use Terms