Professional Documents
Culture Documents
ProductNews
Certified BMS function blocks
Part numbers 1
X(H)*_BMS_Pressoilburner
Intick Run
2
Intick
X(H)_BMS_Purge
Run
4
X(H)_BMS_Igniteburner
Intick Run
6
X(H)_BMS_Steamoilburner
Intick Run
3
The function block includes the fuel-air ratio
X(H)_BMS_FARC monitoring function. The monitoring is based on the
■■ ILworX is the fully
S
mass and volume flows.
integrated configuration,
4 programming and diagnostic
The function block includes the functions of a direct tool from HIMA for the HIMax
X(H)_BMS_Igniteburner
ignition main burner supplied with gaseous fuels. and HIMatrix systems.
■■ ELOP II is the most efficient
5 engineering tool for the
The function block includes the functions of a main HIQuad systems.
X(H)_BMS_Gasburner
burner supplied with gaseous fuels.
6
The function block includes the functions of a main
Safety system
X(H)_BMS_Steamoilburner** burner supplied with liquid fuels. An atomiser, e. g.,
HIMax, HIMatrix and HIQuad,
steam atomiser, is used to atomise the fuel.
the failsafe safety controllers
7 from HIMA, meet all technical
The function block includes the functions of a small requirements for safely
X(H)_BMS_Gasigniter
igniter supplied with gaseous fuels. monitoring the combustion
functions of gas and oil
burners.
*X= for HIMax and HIMatrix (SILworX) H = for HIQuad (ELOP II) **Also for use in coal dust burners
HIMax, HIMatrix and SILworX are registered trademarks of HIMA Paul Hildebrandt GmbH + Co KG
The certified BMS function blocks are component parts of the HIMA Functional safety
complete solution FlexSILon® BCS
96 9000099 1211 V01 © by HIMA Paul Hildebrandt GmbH + Co KG
www.hima.com I info@hima.com