Professional Documents
Culture Documents
Q# 1: Part-I (1x5=5)
The fixed arch is made of
1
(a) Steel (b) Concrete (c) Timber
The fixed arch is indeterminate of _______________ degree.
2
(a) 1st (b) 2nd (c) 3rd
In a framing system, the bending moment diagram is drawn _________ on the tension
5 side of the frame.
(a) Positive (b) Negative
PART II
Draw the shear force and bending moment diagrams of the following
Q# 2 10
Q# 4 10
Q# 3: Determine the force in each member of the truss. State whether the members are in
tension or compression. Set. P = 15 kN.
(10)