Professional Documents
Culture Documents
Contents
1 Scope ................................................................ 2
2 Conflicts and Deviations ................................... 2
3 References........................................................ 2
4 General Shape and Dimensions ....................... 3
5 Materials and Manufacture................................ 3
6 Workmanship .................................................... 3
7 Shipping ............................................................ 3
8 Company Logo.................................................. 3
9 Badge Illustrations ............................................ 4
10 Manager ............................................................ 4
11 Marshal ............................................................. 7
12 Engineer (Grade Codes 11, 12, 13, and 14) ..... 9
13 Advisor (Grade Codes 13 and 14) .................. 12
14 Chief (Grade Codes 12 and 13) ...................... 15
15 Trainer (Grade Codes 10, 11, and 12) ............ 18
16 Deputy Chief (Grade Codes 10 and 11) .......... 21
17 Captain (Grade Codes 8 and 9) ...................... 24
18 Instructor (Grade Codes 8 and 9) ................... 27
19 Truck Operator (Grade Codes 6, 7, and 8) ..... 29
20 Firefighter (Grade Codes 5, 6, 7, and 8) ......... 32
21 Inspector (Grade Codes 6, 7, 8, and 10) ......... 35
Revision Summary.................................................. 38
Attachments - Department's Job Title Badges ........ 39
1 Scope
This specification, together with the Purchase Order, covers the minimum requirements
for Fire Protection Department (FrPD) Pin Type Uniform Shirt Badges.
2.1 Any conflicts between this document and other applicable Mandatory Saudi
Aramco Engineering Requirements (MSAERs) shall be addressed to the
EK&RD Coordinator.
2.2 Any deviation from the requirements herein shall follow internal company
procedure SAEP-302.
2.3 If conflicts and/or deviations arise between this Specification and other Purchase
Order Documents not specifically covered as exceptions by the Purchase Order,
the Buyer and the Fire Protection Department shall be consulted and a ruling
obtained by the manufacturer in writing before work proceeds. The Fire
Protection Department reserves the right to review, test, and reject any
Manufacturer's badges and requires that a sample badge of each rank be sent for
evaluation and approval before manufacturing the requested quantities.
3 References
The selection of material and equipment, and the design, construction, maintenance, and
repair of equipment and facilities covered by this specification shall comply with the
latest edition of the references listed below, unless otherwise noted.
The Badge is a duplicate, in general form, of the WH-153 “Zodiac” badge made by the
Entenmann-Rovin Company, except that the eagle's wings are removed.
Page 2 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
4.2 The shield and the helmet rim shall have a rough textured finished.
4.3 For the various badge dimensions refer to the descriptions under the respective
ranks.
5.1 Custom quality 14 gauge genuine “Carltone Gold” (14K-like gold tone) shall be
used for the shield and 16 gauge genuine “Carltone Gold” for the panels and all
other items where “Carltone Gold” is specified. Otherwise, “Platiloy Silver,”
providing an all through platinum-like silver tone, shall be used. For the actual
materials to be used, i.e., “Carltone Gold” (14K-like gold tone) or “Platiloy
Silver” (platinum-like silver tone), refer to the respective rank badge details.
5.3 Enamels shall be high temperature French cloisonné fused at over 1,300°F.
5.4 Joints, catches and posts shall be made of solid nickel silver findings welded
with “sterling” solder at over 1,000°F. The findings shall be made from Ballou
joint #37, catch #61 and pin #38.
5.5 All pieces shall be hard struck with sharply engraved details.
6 Workmanship
The omission or apparent omission of any wording or specifications shall mean that
only the highest quality of materials, component parts and labor shall be used. This is a
minimum specification. If superior quality is supplied at the same cost it would be
acceptable. Fire Protection Department shall be notified of any deviations from this
specification.
7 Shipping
Each badge shall be professionally made and individually packed in clear protective
covering.
8 Company Logo
See attachments for placement and description of the Company Logo and refer to the
respective ranks.
Page 3 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
9 Badge Illustrations
See Attachments.
10 Manager
There shall be a 3/16” wide border of raised laurel leaves, starting ¼ from the
point and continuing up the left and right sides of the shield and ending with
clockwise and anti-clockwise scrolls respectively. An “X” shaped pattern shall
interrupt the laurel leaves halfway along both sides of the shield.
10.3 Base
At the point (bottom) of the heart shaped shield, and within the thickness of the
laurel leaves, there shall be three vertical rectangles, the center rectangle being
slightly wider. On each side of the vertical rectangles, there shall be a multiple
stripe pattern of equal thickness pointing in the same direction as the laurel leaves.
10.4 Border
There shall be a depressed smooth textured border ( -inch wide) between the
laurel leaves and the main body of the shield.
The rough textured surface of the shield shall be superimposed with 28 equally
spaced raised bars with smooth surfaces radiating from the center and
terminating of the depressed border and having alternating lengths. The raised
bars increase in width as they radiate outward.
Page 4 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
10.6 Helmet
The New Yorker style helmet shall be centrally placed on top of the shield.
The front of the helmet shall face toward the left, thus displaying the left side
view of the helmet. The helmet rim shall be of a rough texture.
Height: 7/16” from rim to top of crown
Height of crown (not including rim): ¼”
Length of rim: ⅞”
Width of crown (base of crown): 7/16”
Colors: The helmet crown shall be conflagration gray enamel with coordinating
“Carltone Gold” crown rib stripes and helmet rim. The area between the helmet
shield and helmet crown shall be black enamel. The helmet crown shall be
trimmed in the coordinating “Carltone Gold” and shall consist of five rib stripes.
10.7 Panels
Colors: The panels shall be 16 gauge genuine “Carltone Gold” with royal blue
enamel letters.
Page 5 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Diameter: ½”
Location: The company logo shall be placed in the center of the shield and shall
overlay the raised radiating bars. Colors: Conflagration blue and green enamel
shall be used. Green color is a mixture of 90% magenta and 100% cyan, while
blue color is a mixture of 100% blue, 65% yellow and 10% black. The radial
graduation shall be blue on the upper right and green on the lower left corners.
The star shall be placed centrally and shall compose of 10 corners representing
white dots radiating to the sides.
Location: The FrPD insignia shall be placed centrally ” from the base and
shall partially overlay the raised radiating bars.
Description and Color: The FrPD insignia shall comprise a vertical ladder
proportionally placed with a pike pole and axe crossed over the center of the
ladder. The axe blade shall point outward in the upper right corner (shield's right)
and the axe handle shall point downward in the lower left corner. The pike pole
shall be placed so as to mirror the axe. The New Yorker style helmet shall be
placed in the center and shall overlay the pike pole, axe, and ladder.
Ladder length: ¼”
Ladder width: ” (10 rungs showing)
Pike Pole and Axe Length: 2/8”
Color: The FrPD insignia shall be royal blue enamel background with the rank
insignia and braid trim in Gold.
Page 6 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
11 Marshal
There shall be a 3/16” wide border of raised laurel leaves, starting ¼” from the
point and continuing up the left and right sides of the shield and ending with
clockwise and anti-clockwise scrolls respectively. An “X” shaped pattern shall
interrupt the laurel leaves halfway along both sides of the shield.
11.3 Base
At the point (bottom) of the heart shaped shield, and within the thickness of the
laurel leaves, there shall be three vertical rectangles, the center rectangle being
slightly wider. On each side of the vertical rectangles, there shall be a multiple
stripe pattern of equal thickness pointing in the same direction as the laurel leaves.
11.4 Border
The rough textured surface of the shield shall be superimposed with 28 equally
spaced raised bars with smooth surfaces radiating from the center and
terminating short of the depressed border and having alternating lengths.
The raised bars increase in width as they radiate outward.
11.6 Helmet
The New Yorker style helmet shall be centrally placed on top of the shield.
The front of the helmet shall face toward the left; thus, displaying the left side
Page 7 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Colors: The helmet crown shall be conflagration gray enamel with coordinating
“Carltone Gold” crown rib stripes and helmet rim. The area between the helmet
shield and helmet crown shall be black enamel. The helmet crown shall be
trimmed in the coordinating “Carltone Gold” and shall consist of five rib stripes.
11.7 Panels
Colors: The panels shall be 16 gauge genuine “Carltone Gold” with royal blue
enamel letters.
Page 8 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Square: ½”
Location: The company logo shall be placed in the center of the shield and shall
overlay the raised radiating bars.
Colors: Conflagration blue and green enamel shall be used. Green color is a
mixture of 90% magenta and 100% cyan, while blue color is a mixture of 100%
blue, 65% yellow, and 10% black. The radial graduation shall be blue on the
upper right and green on the lower left corners. The star shall be placed centrally
and shall compose of 10 corners representing white dots radiating to the sides.
Location: The FrPD insignia shall be placed centrally ” from the base and
shall partially overlay the raised radiating bars.
Description and Color: The FrPD insignia shall comprise a vertical ladder
proportionally placed with a pike pole and axe crossed over the center of the
ladder. The axe blade shall point outward in the upper right corner (shield's right)
and the axe handle shall point downward in the lower left corner. The pike pole
shall be placed so as to mirror the axe. The New Yorker style helmet shall be
placed in the center and shall overlay the pike pole, axe, and ladder.
Ladder length: ¼”
Ladder with: ” (10 rungs showing)
Pike Pole and Axe Length: 2/8”
Color: The FrPD insignia shall be royal blue enamel background with the rank
insignia and braid trim in gold.
Page 9 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Height: 2½-inches
Width: 1¾-inches
Thickness:
Shield: approx. - .075 (16 gauge)
Panel (14 gauge) + Shield: approx. - .140-inch.
There shall be a 1/8” wide border of raised laurel leaves, starting 3/16” from the
point and continuing up the left and right sides of the shield. An “X” shaped
pattern shall interrupt the laurel leaves halfway along both sides of the shield.
12.3 Base
At the point (bottom) of the heart shaped shield, and within the thickness of the
laurel leaves, there shall be three vertical rectangles, the center rectangle being
slightly wider. On each side of the vertical rectangles, there shall be a multiple
stripe pattern of equal thickness pointing in the same direction as the laurel
leaves.
12.4 Border
The rough textured surface of the shield shall be superimposed with 24 equally
spaced raised bars with smooth surfaces radiating from the center and
terminating short of the depressed border and having alternating lengths.
The raised bars increase in width as they radiate outward.
12.6 Helmet
The New Yorker style helmet shall be centrally placed on top of the shield.
The front of the helmet shall face toward the left, thus displaying the left side
view of the helmet. The helmet rim shall be of a rough texture.
Height: 7/16” from rim to top of crown
Height of crown (not including rim): ¼”
Length of rim: ⅞”
Width of crown (base of crown): 7/16”
Page 10 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Colors: The helmet crown shall be conflagration gray enamel with “Carltone
Gold” crown rib stripes and helmet rim. The area between the helmet shield and
helmet crown shall be black enamel. The helmet crown shall be trimmed in the
“Carltone Gold” and shall consist of five rib stripes.
12.7 Panels
Colors: The panels shall be 16 gauge genuine “Carltone Gold” with royal blue
enamel letters.
Square: ½”
Page 11 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Location: The company logo shall be placed in the center of the shield and shall
overlay the raised radiating bars.
Colors: Conflagration blue and green enamel shall be used. Green color is a
mixture of 90% magenta and 100% cyan, while blue color is a mixture of 100%
blue, 65% yellow and 10% black. The radial graduation shall be blue on the
upper right and green on the lower left corners. The star shall be placed centrally
and shall compose of 10 corners representing white dots radiating to the sides.
Location: The FrPD insignia shall be placed centrally ” from the base and
shall partially overlay the raised radiating bars.
Description and Color: The FrPD insignia shall comprise a vertical ladder
proportionally placed with a pike pole and axe crossed over the center of the
ladder. The axe blade shall point outward in the upper right corner (shield's right)
and the axe handle shall point downward in the lower left corner. The pike pole
shall be placed so as to mirror the axe. The New Yorker style helmet shall be
placed in the center and shall overlay the pike pole, axe, and ladder.
Ladder length: ¼”
Ladder with: ” (10 rungs showing)
Pike Pole and Axe Length: 2/8”
Color: The FrPD insignia shall be royal blue enamel background with the rank
insignia and braid trim in gold
Page 12 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
There shall be a ⅛” wide border of raised laurel leaves, starting 3/16” from the
point and continuing up the left and right sides of the shield. An “X” shaped
pattern shall interrupt the laurel leaves halfway along both sides of the shield.
13.3 Base
At the point (bottom) of the heart shaped shield, and within the thickness of the
laurel leaves, there shall be three vertical rectangles, the center rectangle being
slightly wider. On each side of the vertical rectangles, there shall be a multiple
stripe pattern of equal thickness pointing in the same direction as the laurel leaves.
13.4 Border
The rough textured surface of the shield shall be superimposed with 24 equally
spaced raised bars with smooth surfaces radiating from the center and
terminating short of the depressed border and having alternating lengths.
The raised bars increase in width as they radiate outward.
13.6 Helmet
The New Yorker style helmet shall be centrally placed on top of the shield.
The front of the helmet shall face toward the left, thus displaying the left side
view of the helmet. The helmet rim shall be of a rough texture.
Height: 7/16” from rim to top of crown
Height of crown (not including rim): ¼”
Length of rim: ⅞”
Width of crown (base of crown): 7/16”
Colors: The helmet crown shall be conflagration gray enamel with “Carltone
Gold” crown rib stripes and helmet rim. The area between the helmet shield
and helmet crown shall be black enamel. The helmet crown shall be trimmed in
the “Carltone Gold” and shall consist of five rib stripes.
Page 13 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
13.7 Panels
Colors: The panels shall be 16 gauge genuine “Carltone Gold” with royal blue
enamel letters.
Square: ½”
Location: The company logo shall be placed in the center of the shield and shall
overlay the raised radiating bars.
Colors: Conflagration blue and green enamel shall be used. Green color is a
mixture of 90% magenta and 100% cyan, while blue color is a mixture of 100%
Page 14 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
blue, 65% yellow and 10% black. The radial graduation shall be blue on the
upper right and green on the lower left corners. The star shall be placed centrally
and shall compose of 10 corners representing white dots radiating to the sides.
Location: The FrPD insignia shall be placed centrally 1/16” from the base and
shall partially overlay the raised radiating bars.
Description and Color: The FrPD insignia shall comprise a vertical ladder
proportionally placed with a pike pole and axe crossed over the center of the
ladder. The axe blade shall point outward in the upper right corner (shield's right)
and the axe handle shall point downward in the lower left corner. The pike pole
shall be placed so as to mirror the axe. The New Yorker style helmet shall be
placed in the center and shall overlay the pike pole, axe, and ladder.
Ladder length: ¼”
Ladder with: ” (10 rungs showing)
Pike Pole and Axe Length: 2/8”
Color: The FrPD insignia shall be royal blue enamel background with the rank
insignia and braid trim in gold
There shall be a ⅛” wide border of raised laurel leaves, starting 3/16” from the
point and continuing up the left and right sides of the shield. An “X” shaped
Page 15 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
pattern shall interrupt the laurel leaves halfway along both sides of the shield.
14.3 Base
At the point (bottom) of the heart shaped shield, and within the thickness of the
laurel leaves, there shall be three vertical rectangles, the center rectangle being
slightly wider. On each side of the vertical rectangles, there shall be a multiple
stripe pattern of equal thickness pointing in the same direction as the laurel leaves.
14.4 Border
The rough textured surface of the shield shall be superimposed with 24 equally
spaced raised bars with smooth surfaces radiating from the center and
terminating short of the depressed border and having alternating lengths.
The raised bars increase in width as they radiate outward.
14.6 Helmet
The New Yorker style helmet shall be centrally placed on top of the shield.
The front of the helmet shall face toward the left, thus displaying the left side
view of the helmet. The helmet rim shall be of a rough texture.
Height: 7/16” from rim to top of crown
Height of crown (not including rim): ¼”
Length of rim: ⅞”
Width of crown (base of crown): 7/16”
Colors: The helmet crown shall be conflagration gray enamel with “Carltone
Gold” crown rib stripes and helmet rim. The area between the helmet shield and
helmet crown shall be black enamel. The helmet crown shall be trimmed in the
“Carltone Gold” and shall consist of five rib stripes.
14.7 Panels
Colors: The panels shall be 16 gauge genuine “Carltone Gold” with royal blue
enamel letters.
Page 16 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Width: 3/16”
Height of Letters: ⅛”
English: “Saudi Aramco”
Font: DAX TYPE FONT
Square: ½”
Location: The company logo shall be placed in the center of the shield and shall
overlay the raised radiating bars.
Colors: Conflagration blue and green enamel shall be used. Green color is a
mixture of 90% magenta and 100% cyan, while blue color is a mixture of 100%
blue, 65% yellow and 10% black. The radial graduation shall be blue on the
upper right and green on the lower left corners. The star shall be placed centrally
and shall compose of 10 corners representing white dots radiating to the sides.
Location: The FrPD insignia shall be placed centrally ” from the base and
Page 17 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Description and Color: The FrPD insignia shall comprise a vertical ladder
proportionally placed with a pike pole and axe crossed over the center of the
ladder. The axe blade shall point outward in the upper right corner (shield's right)
and the axe handle shall point downward in the lower left corner. The pike pole
shall be placed so as to mirror the axe. The New Yorker style helmet shall be
placed in the center and shall overlay the pike pole, axe, and ladder.
Ladder length: ¼”
Ladder with: ” (10 rungs showing)
Pike Pole and Axe Length: 2/8”
Color: The FrPD insignia shall be royal blue enamel background with the rank
insignia and braid trim in gold
There shall be a ⅛” wide border of raised laurel leaves, starting 3/16” from the
point and continuing up the left and right sides of the shield. An “X” shaped
pattern shall interrupt the laurel leaves halfway along both sides of the shield.
15.3 Base
At the point (bottom) of the heart shaped shield, and within the thickness of the
Laurel leaves, there shall be three vertical rectangles, the center rectangle being
slightly wider. On each side of the vertical rectangles, there shall be a multiple
stripe pattern of equal thickness pointing in the same direction as the laurel leaves.
Page 18 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
15.4 Border
The rough textured surface of the shield shall be superimposed with 24 equally
spaced raised bars with smooth surfaces radiating from the center and
terminating short of the depressed border and having alternating lengths.
The raised bars increase in width as they radiate outward.
15.6 Helmet
The New Yorker style helmet shall be centrally placed on top of the shield.
The front of the helmet shall face toward the left, thus displaying the left side
view of the helmet. The helmet rim shall be of a rough texture.
Height: 7/16” from rim to top of crown
Height of crown (not including rim): ¼”
Length of rim: ⅞”
Width of crown (base of crown): 7/16”
Color: The helmet crown shall be conflagration gray enamel with “Carltone
Gold” crown rib stripes and helmet rim. The area between the helmet shield and
helmet crown shall be black enamel. The helmet crown shall be trimmed in the
“Carltone Gold” and shall consist of five rib stripes.
15.7 Panels
Colors: The panels shall be 16 gauge genuine “Carltone Gold” with royal blue
enamel letters.
Page 19 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Square: ½”
Location: The company logo shall be placed in the center of the shield and shall
overlay the raised radiating bars.
Colors: Conflagration blue and green enamel shall be used. Green color is a
mixture of 90% magenta and 100% cyan, while blue color is a mixture of 100%
blue, 65% yellow and 10% black. The radial graduation shall be blue on the
upper right and green on the lower left corners. The star shall be placed centrally
and shall compose of 10 corners representing white dots radiating to the sides.
Location: The FrPD insignia shall be placed centrally ” from the base and
shall partially overlay the raised radiating bars.
Description and Color: The FrPD insignia shall comprise a vertical ladder
proportionally placed with a pike pole and axe crossed over the center of the
ladder. The axe blade shall point outward in the upper right corner (shield's right)
and the axe handle shall point downward in the lower left corner. The pike pole
Page 20 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
shall be placed so as to mirror the axe. The New Yorker style helmet shall be
placed in the center and shall overlay the pike pole, axe, and ladder.
Ladder length: ¼”
Ladder with: ” (10 rungs showing)
Pike Pole and Axe Length: 2/8”
Color: The FrPD insignia shall be royal blue enamel background with the rank
insignia and braid trim in gold.
There shall be a ⅛” wide border of raised laurel leaves, starting 3/16” from the
point and continuing up the left and right sides of the shield. An “X” shaped
pattern shall interrupt the laurel leaves halfway along both sides of the shield.
16.3 Base
At the point (bottom) of the heart shaped shield, and within the thickness of the
laurel leaves, there shall be three vertical rectangles, the center rectangle being
slightly wider. On each side of the vertical rectangles, there shall be a multiple
stripe pattern of equal thickness pointing in the same direction as the laurel leaves.
16.4 Border
Page 21 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
The rough textured surface of the shield shall be superimposed with 24 equally
spaced raised bars with smooth surfaces radiating from the center and
terminating short of the depressed border and having alternating lengths.
The raised bars increase in width as they radiate outward.
16.6 Helmet
The New Yorker style helmet shall be centrally placed on top of the shield.
The front of the helmet shall face toward the left, thus displaying the left side
view of the helmet. The helmet rim shall be of a rough texture.
Height: 7/16” from rim to top of crown
Height of crown (not including rim): ¼”
Length of rim: ⅞”
Width of crown (base of crown): 7/16”
Color: The helmet crown shall be conflagration gray enamel with “Carltone
Gold” crown rib stripes and helmet rim. The area between the helmet shield and
helmet crown shall be black enamel. The helmet crown shall be trimmed in the
“Carltone Gold” and shall consist of five rib stripes.
16.7 Panels
Colors: The panels shall be 16 gauge genuine “Carltone Gold” with royal blue
enamel letters.
Page 22 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Square: ½”
Location: The company logo shall be placed in the center of the shield and shall
overlay the raised radiating bars.
Colors: Conflagration blue and green enamel shall be used. Green color is a
mixture of 90% magenta and 100% cyan, while blue color is a mixture of 100%
blue, 65% yellow and 10% black. The radial graduation shall be blue on the
upper right and green on the lower left corners. The star shall be placed centrally
and shall compose of 10 corners representing white dots radiating to the sides.
Location: The FrPD insignia shall be placed centrally ” from the base and
shall partially overlay the raised radiating bars.
Description and Color: The FrPD insignia shall comprise a vertical ladder
proportionally placed with a pike pole and axe crossed over the center of the
ladder. The axe blade shall point outward in the upper right corner (shield's right)
and the axe handle shall point downward in the lower left corner. The pike pole
shall be placed so as to mirror the axe. The New Yorker style helmet shall be
placed in the center and shall overlay the pike pole, axe, and ladder.
Ladder length: ¼”
Ladder with: ” (10 rungs showing)
Pike Pole and Axe Length: 2/8”
Page 23 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Color: The FrPD insignia shall be royal blue enamel background with the rank
insignia and braid trim in gold.
There shall be a ⅛” wide border of raised laurel leaves, starting 3/16” from the
point and continuing up the left and right sides of the shield. An “X” shaped
pattern shall interrupt the laurel leaves halfway along both sides of the shield.
17.3 Base
At the point (bottom) of the heart shaped shield, and within the thickness of the
laurel leaves, there shall be three vertical rectangles, the center rectangle being
slightly wider. On each side of the vertical rectangles, there shall be a multiple
stripe pattern of equal thickness pointing in the same direction as the laurel leaves.
17.4 Border
The rough textured surface of the shield shall be superimposed with 24 equally
spaced raised bars with smooth surfaces radiating from the center and
terminating short of the depressed border and having alternating lengths.
The raised bars increase in width as they radiate outward.
Page 24 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
17.6 Helmet
The New Yorker style helmet shall be centrally placed on top of the shield.
The front of the helmet shall face toward the left, thus displaying the left side
view of the helmet. The helmet rim shall be of a rough texture.
Height: 7/16” from rim to top of crown
Height of crown (not including rim): ¼”
Length of rim: ⅞”
Width of crown (base of crown): 7/16”
Color: The helmet crown shall be conflagration gray enamel with “Platiloy
Silver” crown rib stripes and helmet rim. The area between the helmet shield
and helmet crown shall be black enamel. The helmet crown shall be trimmed in
the “Platiloy Silver” and shall consist of five rib stripes.
17.7 Panels
Colors: The panels shall be 16 gauge genuine “Carltone Gold” with royal blue
enamel letters.
Page 25 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Square: ½”
Location: The company logo shall be placed in the center of the shield and shall
overlay the raised radiating bars.
Colors: Conflagration blue and green enamel shall be used. Green color is a
mixture of 90% magenta and 100% cyan, while blue color is a mixture of 100%
blue, 65% yellow and 10% black. The radial graduation shall be blue on the
upper right and green on the lower left corners. The star shall be placed centrally
and shall compose of 10 corners representing white dots radiating to the sides.
Location: The FrPD insignia shall be placed centrally ” from the base and
shall partially overlay the raised radiating bars.
Description and Color: The FrPD insignia shall comprise a vertical ladder
proportionally placed with a pike pole and axe crossed over the center of the
ladder. The axe blade shall point outward in the upper right corner (shield's right)
and the axe handle shall point downward in the lower left corner. The pike pole
shall be placed so as to mirror the axe. The New Yorker style helmet shall be
placed in the center and shall overlay the pike pole, axe, and ladder.
Ladder length: ¼”
Ladder with: ” (10 rungs showing)
Pike Pole and Axe Length: 2/8”
Color: The FrPD insignia shall be royal blue enamel background with the rank
insignia and braid trim in gold.
Page 26 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
There shall be a ⅛” wide border of raised laurel leaves, starting 3/16” from the
point and continuing up the left and right sides of the shield. An “X” shaped
pattern shall interrupt the laurel leaves halfway along both sides of the shield.
18.3 Base
At the point (bottom) of the heart shaped shield, and within the thickness of the
laurel leaves, there shall be three vertical rectangles, the center rectangle being
slightly wider. On each side of the vertical rectangles, there shall be a multiple
stripe pattern of equal thickness pointing in the same direction as the laurel leaves.
18.4 Border
The rough textured surface of the shield shall be superimposed with 24 equally
spaced raised bars with smooth surfaces radiating from the center and
terminating short of the depressed border and having alternating lengths.
The raised bars increase in width as they radiate outward.
18.6 Helmet
The New Yorker style helmet shall be centrally placed on top of the shield.
Page 27 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
The front of the helmet shall face toward the left, thus displaying the left side
view of the helmet. The helmet rim shall be of a rough texture. Height: 7/16”
from rim to top of crown.
Height of crown (not including rim): ¼”
Length of rim: ⅞”
Width of crown (base of crown): 7/16”
Color: The helmet crown shall be conflagration gray enamel with “Platiloy
Silver” crown rib stripes and helmet rim. The area between the helmet shield
and helmet crown shall be black enamel. The helmet crown shall be trimmed in
the “Platiloy Silver” and shall consist of five rib stripes.
18.7 Panels
Colors: The panels shall be 16 gauge genuine “Carltone Gold” with royal blue
enamel letters.
Page 28 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Height of Letters: ⅛”
English bold block letters: FIRE DEPT.
Font: FRUTIGER FONT
Square: ½”
Location: The company logo shall be placed in the center of the shield and shall
overlay the raised radiating bars.
Colors: Conflagration blue and green enamel shall be used. Green color is a
mixture of 90% magenta and 100% cyan, while blue color is a mixture of 100%
blue, 65% yellow and 10% black. The radial graduation shall be blue on the
upper right and green on the lower left corners. The star shall be placed centrally
and shall compose of 10 corners representing white dots radiating to the sides.
Location: The FrPD insignia shall be placed centrally ” from the base and
shall partially overlay the raised radiating bars.
Description and Color: The FrPD insignia shall comprise a vertical ladder
proportionally placed with a pike pole and axe crossed over the center of the
ladder. The axe blade shall point outward in the upper right corner (shield's right)
and the axe handle shall point downward in the lower left corner. The pike pole
shall be placed so as to mirror the axe. The New Yorker style helmet shall be
placed in the center and shall overlay the pike pole, axe, and ladder.
Ladder length: ¼”
Ladder with: ” (10 rungs showing)
Pike Pole and Axe Length: 2/8”
Color: The FrPD insignia shall be royal blue enamel background with the rank
insignia and braid trim in gold.
Page 29 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
There shall be a ⅛” wide border of raised laurel leaves, starting 3/16” from the
point and continuing up the left and right sides of the shield. An “X” shaped
pattern shall interrupt the laurel leaves halfway along both sides of the shield.
19.3 Base
At the point (bottom) of the heart shaped shield, and within the thickness of the
laurel leaves, there shall be three vertical rectangles, the center rectangle being
slightly wider. On each side of the vertical rectangles, there shall be a multiple
stripe pattern of equal thickness pointing in the same direction as the laurel leaves.
19.4 Border
The rough textured surface of the shield shall be superimposed with 24 equally
spaced raised bars with smooth surfaces radiating from the center and
terminating short of the depressed border and having alternating lengths.
The raised bars increase in width as they radiate outward.
19.6 Helmet
The New Yorker style helmet shall be centrally placed on top of the shield.
The front of the helmet shall face toward the left, thus displaying the left side
view of the helmet. The helmet rim shall be of a rough texture. Height: 7/16”
from rim to top of crown. Height of crown (not including rim): ¼”, Length of
rim: ⅞”, Width of crown (base of crown): 7/16”.
Color: The helmet crown shall be conflagration gray enamel with “Platiloy
Silver” crown rib stripes and helmet rim. The area between the helmet shield
and helmet crown shall be black enamel. The helmet crown shall be trimmed in
the “Platiloy Silver” and shall consist of five rib stripes.
Page 30 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
19.7 Panels
Colors: The panels shall be 16 gauge genuine “Carltone Gold” with royal blue
enamel letters.
Square: ½”.
Location: The company logo shall be placed in the center of the shield and shall
overlay the raised radiating bars.
Colors: Conflagration blue and green enamel shall be used. Green color is a
mixture of 90% magenta and 100% cyan, while blue color is a mixture of 100%
Page 31 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
blue, 65% yellow and 10% black. The radial graduation shall be blue on the
upper right and green on the lower left corners. The star shall be placed centrally
and shall compose of 10 corners representing white dots radiating to the sides.
Location: The FrPD insignia shall be placed centrally ” from the base and
shall partially overlay the raised radiating bars.
Description and Color: The FrPD insignia shall comprise a vertical ladder
proportionally placed with a pike pole and axe crossed over the center of the
ladder. The axe blade shall point outward in the upper right corner (shield's right)
and the axe handle shall point downward in the lower left corner. The pike pole
shall be placed so as to mirror the axe. The New Yorker style helmet shall be
placed in the center and shall overlay the pike pole, axe, and ladder.
Ladder length: ¼”
Ladder with: ” (10 rungs showing)
Pike Pole and Axe Length: 2/8”
Color: The FrPD insignia shall be royal blue enamel background with the rank
insignia and braid trim in gold.
There shall be a ⅛” wide border of raised laurel leaves, starting 3/16” from the
point and continuing up the left and right sides of the shield. An “X” shaped
Page 32 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
pattern shall interrupt the laurel leaves halfway along both sides of the shield.
20.3 Base
At the point (bottom) of the heart shaped shield, and within the thickness of the
laurel leaves, there shall be three vertical rectangles, the center rectangle being
slightly wider. On each side of the vertical rectangles, there shall be a multiple
stripe pattern of equal thickness pointing in the same direction as the laurel leaves.
20.4 Border
The rough textured surface of the shield shall be superimposed with 24 equally
spaced raised bars with smooth surfaces radiating from the center and
terminating short of the depressed border and having alternating lengths.
The raised bars increase in width as they radiate outward.
20.6 Helmet
The New Yorker style helmet shall be centrally placed on top of the shield.
The front of the helmet shall face toward the left, thus displaying the left side
view of the helmet. The helmet rim shall be of a rough texture.
Height: 7/16” from rim to top of crown
Height of crown (not including rim): ¼”
Length of rim: ⅞”
Width of crown (base of crown): 7/16”
Color: The helmet crown shall be conflagration gray enamel with “Platiloy
Silver” crown rib stripes and helmet rim. The area between the helmet shield
and helmet crown shall be black enamel. The helmet crown shall be trimmed in
the “Platiloy Silver” and shall consist of five rib stripes.
20.7 Panels
Colors: The panels shall be 16 gauge genuine “Carltone Gold” with royal blue
enamel letters.
Page 33 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Width: 3/16”
Height of Letters: ⅛”
English: “Saudi Aramco”
Font: DAX TYPE FONT
Square: ½”
Location: The company logo shall be placed in the center of the shield and shall
overlay the raised radiating bars.
Colors: Conflagration blue and green enamel shall be used. Green color is a
mixture of 90% magenta and 100% cyan, while blue color is a mixture of 100%
blue, 65% yellow and 10% black. The radial graduation shall be blue on the
upper right and green on the lower left corners. The star shall be placed centrally
and shall compose of 10 corners representing white dots radiating to the sides.
Location: The FrPD insignia shall be placed centrally ” from the base and
Page 34 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Description and Color: The FrPD insignia shall comprise a vertical ladder
proportionally placed with a pike pole and axe crossed over the center of the
ladder. The axe blade shall point outward in the upper right corner (shield's right)
and the axe handle shall point downward in the lower left corner. The pike pole
shall be placed so as to mirror the axe. The New Yorker style helmet shall be
placed in the center and shall overlay the pike pole, axe, and ladder.
Ladder length: ¼”
Ladder with: ” (10 rungs showing)
Pike Pole and Axe Length: 2/8”
Color: The FrPD insignia shall be royal blue enamel background with the rank
insignia and braid trim in gold.
There shall be a ⅛” wide border of raised laurel leaves, starting 3/16” from the
point and continuing up the left and right sides of the shield. An “X” shaped
pattern shall interrupt the laurel leaves halfway along both sides of the shield.
21.3 Base
At the point (bottom) of the heart shaped shield, and within the thickness of the
laurel leaves, there shall be three vertical rectangles, the center rectangle being
slightly wider. On each side of the vertical rectangles, there shall be a multiple
stripe pattern of equal thickness pointing in the same direction as the laurel leaves.
Page 35 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
21.4 Border
The rough textured surface of the shield shall be superimposed with 24 equally
spaced raised bars with smooth surfaces radiating from the center and
terminating short of the depressed border and having alternating lengths.
The raised bars increase in width as they radiate outward.
21.6 Helmet
The New Yorker style helmet shall be centrally placed on top of the shield.
The front of the helmet shall face toward the left, thus displaying the left side
view of the helmet. The helmet rim shall be of a rough texture. Height: 7/16”
from rim to top of crown.
Height of crown (not including rim): ¼”
Length of rim: ⅞”
Width of crown (base of crown): 7/16”
Color: The helmet crown shall be conflagration gray enamel with “Platiloy
Silver” crown rib stripes and helmet rim. The area between the helmet shield
and helmet crown shall be black enamel. The helmet crown shall be trimmed in
the “Platiloy Silver” and shall consist of five rib stripes.
21.7 Panels
Colors: The panels shall be 16 gauge genuine “Carltone Gold” with royal blue
enamel letters.
Page 36 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Square: ½”
Location: The company logo shall be placed in the center of the shield and shall
overlay the raised radiating bars.
Colors: Conflagration blue and green enamel shall be used. Green color is a
mixture of 90% magenta and 100% cyan, while blue color is a mixture of 100%
blue, 65% yellow and 10% black. The radial graduation shall be blue on the
upper right and green on the lower left corners. The star shall be placed centrally
and shall compose of 10 corners representing white dots radiating to the sides.
Location: The FrPD insignia shall be placed centrally ” from the base and
shall partially overlay the raised radiating bars.
Description and Color: The FrPD insignia shall comprise a vertical ladder
proportionally placed with a pike pole and axe crossed over the center of the
ladder. The axe blade shall point outward in the upper right corner (shield's right)
and the axe handle shall point downward in the lower left corner. The pike pole
shall be placed so as to mirror the axe. The New Yorker style helmet shall be
placed in the center and shall overlay the pike pole, axe, and ladder.
Page 37 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Ladder length: ¼”
Ladder with: ” (10 rungs showing)
Pike Pole and Axe Length: 2/8”
Color: The FrPD insignia shall be royal blue enamel background with the rank
insignia and braid trim in gold.
Revision Summary
16 April 2012 Revised the "Next Planned Update." Reaffirmed the contents of the document and
reissued with minor changes to introduce the new badge design for truck operators.
11 December 2017 Revised the “Next Planned Update.” Reaffirmed the content of the document, and
reissued as major revision. The level of details conveyed in this SAMSS obligate the use
of a SAMSS document, in order to ensure that manufacturers meet the exactly required
target product.
Page 38 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Page 39 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Page 40 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Page 41 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Page 42 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Page 43 of 44
Document Responsibility: Fire Protection Standards Committee 29-SAMSS-008
Issue Date: 11 December 2020
Next Planned Update: 11 December 2020 Fire Protection Department Uniform Badges
Page 44 of 44