Professional Documents
Culture Documents
Bill Of Material
This is to certify that the material sold and listed below was manufactured in accordance with applicable Weir SPM specifications,
procedures and customer purchase order requirements with assurance in design development, production, installation and
servicing.
Signed:
TAMMY MORAN
Quality Assurance Representative
Pressure Pumping
CERTIFICATION
Material Traceability
We hereby certify that the part number bearing the Traceability Reference FB892-A (Mill Heat Number 8050163M/2018610-5)
was manufactured in accordance with Weir SPM Engineering standards and applicable industry standards
Customer Name:
Customer Purchase Order Number:
Customer Part Number:
CARBON 0.400
MANGANESE 0.730
PHOSPHORUS 0.010
SULPHUR 0.006
SILICON 0.290
CHROMIUM 0.780
MOLYBDENUM 0.220
NICKEL 1.770
TENSILE STRENGTH (PSI) 152289
YIELD STRENGTH (0.2% OFFSET, PSI) 138076
YIELD STRENGTH (0.5% OFFSET, PSI) 0
HARDNESS (BHN) 276
HARDNESS (R/C) 0
ELONGATION IN 2" (%) 17
REDUCTION OF AREA (%) 57
LONGITUDINAL ENERGY (CELSIUS, FT-LB) -30°C 64 62 61
TRANSVERSE ENERGY (CELSIUS, FT-LB) -30°C 61 63 64
TRANSVERSE ENERGY 2 (CELSIUS, FT- 0°C
LB)
Page 2 of 6
CERTIFICATION
Material Traceability
Customer Name:
Quantity: 4
Expiration Date: 1Q-2029
Batch Number: 5632
This is to certify that the parts listed above have been manufactured and inspected in accordance with Weir Oil &
Gas and/or customer design and specification requirements.
All the material acceptances, dimensional acceptances, testing acceptances and processing surveillance were
performed by qualified Weir Oil & Gas personnel in accordance with established Weir Oil & Gas procedures.
Page 3 of 6
CERTIFICATION
Material Traceability
Customer Name:
Quantity: 4
Expiration Date: 1Q-2029
Batch Number: 5506
This is to certify that the parts listed above have been manufactured and inspected in accordance with Weir Oil &
Gas and/or customer design and specification requirements.
All the material acceptances, dimensional acceptances, testing acceptances and processing surveillance were
performed by qualified Weir Oil & Gas personnel in accordance with established Weir Oil & Gas procedures.
Page 4 of 6
CERTIFICATION
Material Traceability
Customer Name:
Quantity: 4
Expiration Date: 1Q-2028
Batch Number: 70800561
This is to certify that the parts listed above have been manufactured and inspected in accordance with Weir Oil &
Gas and/or customer design and specification requirements.
All the material acceptances, dimensional acceptances, testing acceptances and processing surveillance were
performed by qualified Weir Oil & Gas personnel in accordance with established Weir Oil & Gas procedures.
Page 5 of 6
CERTIFICATION
Material Traceability
Customer Name:
Quantity: 4
Expiration Date: 1Q-2028
Batch Number: 70790822
This is to certify that the parts listed above have been manufactured and inspected in accordance with Weir Oil &
Gas and/or customer design and specification requirements.
All the material acceptances, dimensional acceptances, testing acceptances and processing surveillance were
performed by qualified Weir Oil & Gas personnel in accordance with established Weir Oil & Gas procedures.
Page 6 of 6