Professional Documents
Culture Documents
Job Safety and Environmental Analysis Worksheet
Job Safety and Environmental Analysis Worksheet
Project: JGC PENTHOUSE EXTENSION BLDG. Tools and or Equipment required: JSA No:
Job Location & Details: Mobile scaffold, assorted electrical
Installation Of Earthing and Bonding hand tools. Cable tray materials Date Prepared:
JSA Participants:
Section:
Approved by HSE Manager:
Responsible Supervisor:
Drilling holes for brackets Dust inhalation, eye injuries, When drilling holes for brackets, safety glasses must be worn as
electrical shock, falls, hit by well as safety helmet and approved dust mask.
rotating drill.
Ensure drills have handles for good grip (drill bit caught in rebar)
Works area is to be delineated.
Electrical drill and leads to be inspected & have current
inspection sticker attached.
All electrical tools being used to be double insulated.
Under no circumstances are planks allowed on handrails to gain
additional height for work activities.
Distribution boards to have ELCB
Area to be delineated
Box to contain tools and equipment
JOB SAFETY AND ENVIRONMENTAL ANALYSIS WORKSHEET
Cutting copper rod Cuts, severe lacerations, eye Person operating grinder / cutting disc must be competent in its
injuries, electrical shock. safe operation.
Cutter to be inspected and have current testing/ tagging sticker
Gloves, protective eyewear, helmet, safety boots, and dusk mask
to be worn at all times
When cutting use a sparks board to prevent flying objects and
remove personnel from the immediate area
Distribution board to have ELCB
Leads to be kept off ground as far as practical