Professional Documents
Culture Documents
REVISION CERTIFICATE
REVISIONCERTIFICATION VERIFICATION NO. DATE JO/EWO DESCRIPTION ENGG CERT PMT OPRNS
DATE:
DATE:
DATE:
DATE:
DATE:
00
THIS INDICATES THAT REV. NO.__________
00 MAY-20 10-00688 ISSUED OR STAGE 3 DETAILED DESIGN MWA
OF THIS DRAWING IS COVERED, FOR ALL
CONTROL NUMBER R
NAN
APPROVAL/CERTIFICATION REQUIREMENTS,
MAY 20
MAY 20
AGENCY
BY:
PROJECT
BY DRAWING COMPLETION CERTIFICATE
ENGINEER
ENGINEER
DISCIPLINE
CERTIFIED
OPERATIONS
CONSTRUCTION
_____________________
(DCC) NO.10-00688-0001 DATE:
Saudi Aramco 2616-ENG (03/99)
JUBAIL
GENERAL DESCRIPTION OF THE FACILITY
SULFUR HANDLING AND EXPORT FACILITY
SULFUR FORMING AND EXPORT FACILITIES
(ESHE)
DOC
SAUDI ARABIA
MAY 2020
BI-10-00688
SECTION 01
PREPARED BY
F 13
OF THE FACILITY
JO / EWO:
O
GENERAL DESCRIPTION
-
BI-10-00688-0001
ISSUED FOR STAGE 3 DETAILED DESIGN
DRAWING NO.
RE -106142
BGP Expand Sulfur Handling and Export Facility
5
1
OF
SHT. NO.
00
REV. NO.
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
Saudi Aramco 2616-ENG (03/99)
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
PMT OPRNS
SAUDI ARABIAN OIL COMPANY
TABLE OF CONTENTS
ENGG CERT
MWA
00
DISCIPLINE
ENGINEER
NAN
MAY 20
DATE:
PROJECT
ENGINEER
MAY 20
DATE:
CERTIFIED
DATE:
CONSTRUCTION
AGENCY
DATE:
OPERATIONS
DATE:
CONTROL NUMBER
VERIFICATION
EDSD
DATE:
BY:
REVISIONCERTIFICATION
APPROVAL/CERTIFICATION REQUIREMENTS,
THIS INDICATES THAT REV. NO.__________
CERTIFICATE
_____________________
(DCC) NO.10-00688-0001
GENERAL DESCRIPTION OF THE FACILITY DWG.TYPE PLANT NO. INDEX DRAWING NO. SHT. NO. REV. NO.
REVISION
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
PMT OPRNS
SAUDI ARABIAN OIL COMPANY
ENGG CERT
Under BI 10-00688, Saudi Aramco will expand the Berri Gas Plant Sulfur Handling & Export
facility to upgrade the Industrial Security countermeasures to be compliant with the HCIS Security
Directives (2017). The BGP Sulfur Handling & Export facility is located inside of King Fahad
Industrial Port in Jubail, Saudi Arabia on the Arabian Gulf coast of the Kingdom of Saudi Arabia.
Its coordinates are Lat: 27.078747 Long: 49.673311.
MAY-20 10-00688 ISSUED OR STAGE 3 DETAILED DESIGN
NO. DESCRIPTION
JO/EWO
DATE
REV
00
DISCIPLINE
ENGINEER
NAN
MAY 20
DATE:
PROJECT
ENGINEER
MAY 20
DATE:
CERTIFIED
FIGURE 1: GEOGRAPHIC LOCATION OF BGP-ESHE
DATE:
CONSTRUCTION
AGENCY
DATE:
OPERATIONS
DATE:
CONTROL NUMBER
VERIFICATION
EDSD
DATE:
BY:
REVISIONCERTIFICATION
APPROVAL/CERTIFICATION REQUIREMENTS,
THIS INDICATES THAT REV. NO.__________
CERTIFICATE
_____________________
(DCC) NO.10-00688-0001
GENERAL DESCRIPTION OF THE FACILITY DWG.TYPE PLANT NO. INDEX DRAWING NO. SHT. NO. REV. NO.
REVISION
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
PMT OPRNS
SAUDI ARABIAN OIL COMPANY
2. GENERAL PROJECT OVERVIEW
ENGG CERT
The facility has existed since 1982, when the location was rebuilt due to an industrial accident.
The main business of the facility is the solidification, into pelletized form, of liquid sulfur that is
MWA
pumped via pipeline from the main Berri Gas Plant facility, located to the west. Sulfur is a bi-
R
The intent of Saudi Aramco, under the direction of Saudi Aramco, for this project is to upgrade the
Sulfur Handling & Export Plant located in the King Fahd Industrial Port to meet HCIS Security
Directive 01-19 requirements so that the facility is fully compliant with government requirements.
MAY-20 10-00688 ISSUED OR STAGE 3 DETAILED DESIGN
Saudi Aramco will do this by replacing the perimeter, on all elevations, apart from the seaward
DESCRIPTION
facing elevation as this would impact directly on the ability of the facility loading operations to
function effectively. Furthermore, the intent is to replace the main entrance gate, to be
Classification 3 compliant and install ancillary measures required of a Classification 3 facility.
It should be noted that the proposed facility is located within a high security zone integral to the
wider King Abdullah Industrial Port complex. The port complex was previously classified, by HCIS,
as being Classification 1 and has been built to this specification. Therefore, any vehicles or
pedestrians approaching the Sulfur Handling & Export facility are required to transit through the
checks and procedures required for a Classification 1 facility in order to get to the Aramco facility.
Specifically, to get to the Sulfur Handling & Export facility a vehicle must pass through the Coast
JO/EWO
Guard checkpoint at the entrance on the causeway to the KFIP and then the KFIP Port Authority
Main Access Gate and finally the Saudi Aramco Main Entrance Gate at the facility itself. The
DATE
Sulfur Handling & Export facility is much less attractive than other facilities within the King Fahd
Industrial Port in that the facility is not exporting a material that is critically important to the Saudi
economy. Sulfur produced by Berri Gas Plant is a by-product of the gas plant’s gas processing
NO.
REV
00
operation.
DISCIPLINE
ENGINEER
NAN
Adjacent to the Saudi Aramco Sulfur Handling & Export facility is a loading berth for ships to be
MAY 20
DATE:
loaded with pelletized sulfur. However, this berth is owned and operated by KFIP Port Authority
PROJECT
ENGINEER and is the responsibility of KFIP Port Authority.
MAY 20
DATE:
CERTIFIED
DATE:
CONSTRUCTION
AGENCY
DATE:
OPERATIONS
DATE:
CONTROL NUMBER
VERIFICATION
EDSD
DATE:
BY:
REVISIONCERTIFICATION
APPROVAL/CERTIFICATION REQUIREMENTS,
THIS INDICATES THAT REV. NO.__________
CERTIFICATE
_____________________
GENERAL DESCRIPTION OF THE FACILITY DWG.TYPE PLANT NO. INDEX DRAWING NO. SHT. NO. REV. NO.
REVISION
THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL OR IN PART SHALL BE OBTAINED FROM THIS DOCUMENT WITHOUT THE WRITTEN CONSENT OF ITS OWNER.
PMT OPRNS
SAUDI ARABIAN OIL COMPANY
The proposed BI-10-00688 BGP Expand Sulfur handling and export facility have been classified
as a Class 3 facility at previous Stage 1 SRA & COD.
ENGG CERT
BGP-ESHE– Class 3
MWA
R
A comprehensive security system for the following buildings and locations shall be implemented:
Facility Perimeter:
BGP-ESHE– Category 3
MAY-20 10-00688 ISSUED OR STAGE 3 DETAILED DESIGN
Gates:
DESCRIPTION
Protected Assets:
Storage tanks
New Sulfur transfer pumps
DATE
00
DISCIPLINE
ENGINEER
NAN
MAY 20
DATE:
PROJECT
ENGINEER
MAY 20
DATE:
CERTIFIED
DATE:
CONSTRUCTION
AGENCY
DATE:
OPERATIONS
DATE:
CONTROL NUMBER
VERIFICATION
EDSD
DATE:
BY:
REVISIONCERTIFICATION
APPROVAL/CERTIFICATION REQUIREMENTS,
THIS INDICATES THAT REV. NO.__________
CERTIFICATE
_____________________
(DCC) NO.10-00688-0001
GENERAL DESCRIPTION OF THE FACILITY DWG.TYPE PLANT NO. INDEX DRAWING NO. SHT. NO. REV. NO.
REVISION