Professional Documents
Culture Documents
E~ STA o
I
~ e)
EARTH ill
MFETY PRECAUTIQN\
LINE +HV
OPE~.lltIGJNSIB-UCTIONS
1.Dl;lpn:>J$~ON·.
2,tm-ertkli)d5 1!1tf;lthlllinl.trumentobs41l"o'lngocOI<)lJf(:oorling.
CAU110N
4. TolJChRE01.8(ftoconductl)l'"ll~,"lc~t:. St'"-pthL
immll<fNltoly if ......llMil'lg IlMt.NIQ. l'I'lQ.'or txi=ar sQ\llKl.
must b+ 1(tml;7Vvd.
..;;- ,~ I~,I ~~
\
'- L....c.~
/
,
-2- -3
Display
2 Lines x 20 Characteres large L.C.D,
1,8 o serve the International Electrical Symbols listed below Auto-Hold when test stopped and circuit discharged
6210lN 6211 IN
/:}\, Warning Risk of electric shock, 1
2
50DVdc . 25000M0
1000Vdc - 50000MO
1000Vdc
2500Vdc
50000MO
125000Mn
(\
3 2500Vdc - 125000MO 5000Vdc - 250000MQ
/
/ 1'\. \
\ Caution I Refer t this manual before using
the meier
4 5000Vdc - 250000M.o
6210 IN
10000Vdc - 500000M(2
6211/N
Test Voltage 1KVdc 25KVdc 5KVdc 10KVdc
Accuracy ± 5% ± 2 Digits
Supply
Power 8 x 1.5V "C"size
Alkaline battery
-5
l
ml,tSt ~ rt-lMveti,
-
-- , !~I
....:.t~.. ~
,
Do not use the Instrument if the display looks
Display Selection abnormal.
.. Keys "l J
,HV'
E:ARttf'
I.
/'J!\-'-'- f.'!J '+HV
LINE
. 2 Keypad .
Visually check the Keypad.
A damaged keypad will cause the instrument to
SAFETYPBEGAV~ malfunction.
Use only on dc-.onorglsed system.
!<6l!JlO..li
Faulty Test Leads will cause inaccurate readings.
4. Toueh RED IeEkl' to conductor under IN! • Stop ~"t
mt/1oltMf4IlTW)'IIed.
"'rESr- 4 Batteries.
(t"U up to !?o9.9S~
alkaline batteries.
=====...~-'Sit£--==" ,f.';.~
ITQi
--;
Clear a fault.
the test. 1
Go to Main Menu
Switches "ON" 1
the Instrument
Reset ( if depressed for less than one second)
Switches "OFF" the Instrument when depressed
for more than five seconds.
-8- -9
Re·starting or Resetting the Instrument Depress the desired voltage selection key.
OFF "OFF" key for not more tha one second, then
release it. connect the leads then, Press TEST to start
TEST
Switching "OF .. START I STOP
-10
I
Select Insulation test voltage. For example, 5001/
The Following Screen will confirm your selection.
I I
The Following Screen will confirm your selection.
If the Syst~-n is not voltage free. ( or static IS In the air ), the beep will go on,
If the ystem to Test IS not voltage free. the beep will go on,
the follOWing Warning screen Will appears. Remove your leads immediatly.
the follolVlI'lg Warning screen will appears Remove your leads immedlatly.
If the system IS not live, the test Will start and the following
If t :ystem IS not live. the test will start and the following sc:.;en Will appear, indicating the test duration and other factors.
screen will <lppear, indicating the test duration and other factors.
TEST
depressing "TEST' key.
The Instrument will the Auto-Discharge the
WARNING
To avo ,; electrical shock or damage to the meter, do not get
j
START I STOP water InSide the case.
circuit and hold the last stable reading. ------------
Voltage decay can be observed on he bargraph.
Periodically wipe the case with a damp cloth and detergent,
do not use abrasives or solvents. If the meter is not to be
used fe periods of longer than 60 dayS,remove the batteries
Main Menu - New Test - New Selection COld store them separately
-14