Professional Documents
Culture Documents
Note:
<1> Includes a repetitive member at both ends
<2> If a repetitive member is only needed at one end
<3> If a repetitive member is not needed at either end
LINEAR COMPONENTS
Length = 240 Note: Make sure that the units are the same
INPUT Lengthpiece = 20
Lap = 1.5
Note:
<1> Butt-jointed pieces
<2> Lapped pieces
SHEET AND ROLL GOODS
AREA METHOD
Area = 400 Note: Make sure that the units are consistent
Size of the Length = 15.625
piece Width = 7.625
INPUT LapLength = 0.4
If Lapped
LapWidth = 0.4
SpaceLength = 0.5
If Spaced
SpaceWidth = 0.5
Note:
Consider the Block Layout in
<1> Butt-jointed pieces Note: order to identify the required
<2> Lapped pieces pieces
<3> Spaced pieces
Lap = 0.4
Space = 0.5
Note:
<1> Butt-jointed pieces
<2> Lapped pieces
<3> Spaced pieces
WASTE
Quantity = 135.8
INPUT
Waste % = 10
Waste % = 11.740890688 g 12 %
units are consistent
Spread Footing Continuous Footing
No. of Footings 10 ea Length 108 ft
Width 1 3 ft 6 in
2 in Width 2 ft
Width 2 3 ft 6 in
2 in Thickness 1 ft
Thickness 1 ft - in
- in Concrete Waste 8 %
Concrete Waste 10 % Volume 10.85 cyd
Forms 126.67 ft
Volume 4.09 cyd
Foundation Wall
Length 110 ft
4 in
Width - ft
8 in
Height 8 ft
- in
Concrete Waste 5 %
Volume 22.88 cyd