Professional Documents
Culture Documents
Print Date 03/12/2001 Revision 4.0 This document available on the World Wide Web at http://www.amada.com Page 1 of 9
Pega 367 with 04PC Control Layout Drawings ©Amada America, Inc.
Warning
! Qualified personnel must complete all work.
! Do not apply power to the Pega 367 until an A.E.S.I. (Amada Engineering and
Service Incorporated) Engineer is present and has instructed you to do so.
! Not all information required for proper installation, of the Pega 367 is included with
this document. Specific details for proper installation are found in the document
Pega 367 with 04PC User Pre-installation Guide available at the Amada America
Internet web site at http://www.amada.com.
! Considerable effort has been made to ensure that this manual is free of
inaccuracies and omissions. However, as we are constantly improving our
product, some of the data contained herein may be out of date. Please check our
Internet site, http://www.amada.com, for the latest release of this document.
Print Date 03/12/2001 Revision 4.0 This document available on the World Wide Web at http://www.amada.com Page 2 of 9
Pega 367 with 04PC Control Layout Drawings ©Amada America, Inc.
Table Of Contents
Planning the Location of the Machine ..............................................................................................................................................4
Plan View - Pega 367.......................................................................................................................................................................5
Plan View - Pega 367 with V367hs Conveyor ..................................................................................................................................6
Plan View - Pega 367 with V367hs Conveyor and MP1530 Loader ................................................................................................7
End View - Pega 367 .......................................................................................................................................................................8
Elevation View - Pega 367 ...............................................................................................................................................................9
Print Date 03/12/2001 Revision 4.0 This document available on the World Wide Web at http://www.amada.com Page 3 of 9
Pega 367 with 04PC Control Layout Drawings ©Amada America, Inc.
Print Date 03/12/2001 Revision 4.0 This document available on the World Wide Web at http://www.amada.com Page 4 of 9
Pega 367 with 04PC Control Layout Drawings ©Amada America, Inc.
49.21"
E1
8"
32.45"
x.
ma
361.98" Recommended Safety / Maintenance Area 40" from all components
90"
. to "
min 3.15
50" 6
Pega 367
Y-axis zero position
Tables Required
118.03"
199.20" Pega 367 Length
120" Maximum Travel Area 60" Material
A1
Centerline
Pega 367
12" 12" 12"
Scale
74.25" 76.69"
150.94" Pega 367 Width
288.00" Maximum Material Travel Area 144" Material
368.00" Recommended Safety / Maintenance Area 40" from all components
Print Date 03/12/2001 Revision 4.0 This document available on the World Wide Web at http://www.amada.com Page 5 of 9
Pega 367 with 04PC Control Layout Drawings ©Amada America, Inc.
E2 P367hs Conveyor
208 - 230 / 460 / 3 / 60 ±10% .8 kVA 04PC
2.1 amps @ 208 / 3/ 60 VAC Control
2.0 amps @ 230 / 3 / 60 VAC
49.21"
1.0 amps @ 460 / 3 / 60 VAC
Compressed Air Requirements
A1 Pega 367 80 psi @ 8.8 ft/³min. E1
Operator Control Station 8"
32.45"
ax.
m
90"
. to "
min 3.15
50" 6
420.41" Recommended Safety / Maintenance Area 40" from all components
Pega 367
Y-axis zero position
Tables Required
199.20" Pega 367 Length
120" Maximum Travel Area 60" Material
A1
P367hs
E2 12" 12" 12"
59.55"
Scale
Pega 367 Centerline
Access required
this area for
slug removal
44.85"
74.25" 76.69"
150.94" Pega 367 Width
288.00" Maximum Material Travel Area 144" Material
368.00" Recommended Safety / Maintenance Area 40" from all components
Print Date 03/12/2001 Revision 4.0 This document available on the World Wide Web at http://www.amada.com Page 6 of 9
Pega 367 with 04PC Control Layout Drawings ©Amada America, Inc.
Plan View - Pega 367 with V367hs Conveyor and MP1530 Loader
Electrical Requirements
E1 Pega 367
230 / 460 / 3 / 60 ±10% 18 kVA
46 amps @ 230 / 3 / 60 VAC
23 amps @ 460 / 3 / 60 VAC 27.56"
E2 P367hs Conveyor
208 - 230 / 460 / 3 / 60 ±10% .8 kVA 04PC
2.1 amps @ 208 / 3/ 60 VAC Control
2.0 amps @ 230 / 3 / 60 VAC
49.21"
1.0 amps @ 460 / 3 / 60 VAC
E3 MP1530 Loader
200 / 3 / 60 ±10%, 10 Kva
To operate at 230 / 460 VAC a step up E1 MP1530
transformer with the following service is Xformer E3
required 8"
32.45"
ax.
29 amps @ 200 / 3 / 60 VAC A2
m
26 amps @ 230 / 3 / 60 VAC
90"
. to "
min 3.15
13 amps @ 460 / 3 / 60 VAC
6
Compressed Air Requirements
50"
A1 Pega 367 80 psi @ 8.8 ft/³min.
420.41" Recommended Safety / Maintenance Area 40" from all components
139.00"
118.03"
84.80"
Optional Material Support
Tables Required
A1
P367hs
MP1530
Forklift access required this area
E2
59.55"
Pega 367 Centerline
Access required
this area for
slug removal
44.85"
Print Date 03/12/2001 Revision 4.0 This document available on the World Wide Web at http://www.amada.com Page 7 of 9
Pega 367 with 04PC Control Layout Drawings ©Amada America, Inc.
131.10"*
93.50"*
42.05"*
Material
Pass
Line
Print Date 03/12/2001 Revision 4.0 This document available on the World Wide Web at http://www.amada.com Page 8 of 9
Pega 367 with 04PC Control Layout Drawings ©Amada America, Inc.
94.76"*
62.99"
43.31"*
Material
Pass Line
Print Date 03/12/2001 Revision 4.0 This document available on the World Wide Web at http://www.amada.com Page 9 of 9