Professional Documents
Culture Documents
Contents
JCB SKID STEER AND
COMPACT TRACK LOADER
SSL / CTL introduction 01
History 02 World’s safest
• Entry and exit from the left side of the machine,
Range 04 clear of the loader arm and attachments
Skid steer fundamentals 05 • An average of 60% better visibility
1
Product Selling Guide Product Selling Guide
In late 2008, the wheels were put in motion to move all design
and development of the skid steer and compact track loader to
the United States, the home of the skid steer loader.
JCB’s history with skid steer loaders dates back to 1993, when
JCB revolutionized the construction industry with its single
monoboom design, providing unmatched visibility and safety
for machine operators.
2 3
Product Selling Guide Product Selling Guide
97% 17
MARKET COVERAGE MODELS
Skid steer fundamentals
Vertical lift versus radial lift
SMALL PLATFORM
Vertical lift geometry gives better reach at full lift height as
compared with radial lift machines. Vertical lift machines are also
more stable with the load at full height, as compared to radial lift
machines. Radial lift machines have further reach throughout the
135 155 175 (Q2 2012) 190 (Q2 2012) 205 (Q2 2012)
Radial Radial Vertical Vertical Vertical middle of the lifting range.
35.7 kW (47.9 hp) 44.7 kW (59.9 hp) 44.7 kW (59.9 hp) 44.7 kW (59.9 hp) 44.7 kW (59.9 hp)
ROC – 612 kg ROC – 703 kg ROC – 794 kg ROC – 862 kg ROC – 930 kg
(1,350 lbs) (1,550 lbs) (1,750 lbs) (1,900 lbs) (2,050 lbs)
LARGE PLATFORM
SMALL PLATFORM
LARGE PLATFORM
4 5
Product Selling Guide Product Selling Guide
6 7
Product Selling Guide Product Selling Guide
The maximum amount of weight that the machine can hold • Standard skid steer bucket is non-existent
before lifting the rear wheels and tipping the machine.
• Dependant upon machine width over tires
Measured with the load at the furthest position from machine in lift ark, A customer wants a JCB 260 to load trucks with soil. Which size
full fuel tank and operator.
bucket is the best choice? The soil weighs 1890kg/m3 (118 lb/ft3).
Note: rated operating capacity will be reduced when using pallet Rated Operating Capacity = 1238 kg (2724 lb)
forks due to increased load centre. (Bucket Capacity x Weight of Material + Weight of Bucket)
must be less than ROC
Answer: 1981 mm (78") Bucket
0.472 kg (16.7 lb) x 1890 kg (118 lb) + 265 kg (582 lb) = 1238 kg (2535 lb)
8 9
Product Selling Guide Product Selling Guide
JCB PowerBoom design advantages World's safest skid steer – side entry
• Common sense boom design maximizes machine performance • Side door for safe entry and exit clear of crush and slip hazards
associated with traditional twin arm front entry skid steer and
• JCB’s PowerBoom has up to 20 percent more steel in one
compact track loaders
boom than the two arms of competitive units
• NIOSH (National Institute of Occupational Safety and Health)
• It allows greater visibility on the job site, with no need for
in the United States has recognized the benefits of the single
torque tubes or an arm on the left side of the machine
boom, side entry design and has rewritten their safety alert
• Proven intelligent design from the maker of the world’s best accordingly
selling telescopic handlers, the cab and engine are offset from
• Emergency exit through front opening on canopy machines
the loader arm making the JCB skid steer a very well balanced
and front windshield on cab machines
machine
• Over twice the size of the average emergency exit on
traditional twin arm skid steers and compact track loaders
10 11
Product Selling Guide Product Selling Guide
World's safest skid steer – visibility World's most comfortable skid steer loader
• 60% better all-round visibility versus the average twin arm skid • Largest operator area in the industry – 33% larger than the
steer and track loader average competition on large platform and 46% larger than
the average competition on small platform
• Reduces chances of costly insurance claims
• Open canopy, enclosed cab with heat, and cab with heat and
• Increases productivity by reducing operator hesitation and
A/C options available
increasing confidence
• Cabs are pressurized and sealed for reduced noise, dust ingress
and better climate control
270°
VISIBILITY
60%
ADVANTAGE
12 13
Product Selling Guide Product Selling Guide
• Optional heated air suspension seat includes adjustable control • Features O Ring Face Seals on all hydraulic fittings
pads that can be adjusted to fit nearly any operator
• Service access through a rear opening door, top opening
• Low effort servo controls reduce operator fatigue, ensuring bonnet and gas strut assisted tilting radiator
maximum operator productivity
• One person can easily tilt the cab to access hydraulic hoses
• All controls are within easy reach of the operator and located and components
in the operator’s line of sight
• All daily check points are easily accessible and grouped for
• The electronic hand throttle is conveniently located on the right quicker routine maintenance
control panel and provides for precise engine rpm adjustment
• 30% less grease points than the average vertical lift skid steer
and compact track loader
14 15
Product Selling Guide Product Selling Guide
World’s most productive skid steer With JCB skid steers and compact track
• With 30 JCB approved attachment families to choose from,
loaders the options are endless
the JCB skid steer and compact track loader are able to
accomplish almost any task on the job site
* Based on large platform due to faster speed of getting in and out, and start
up time.
16 17
Product Selling Guide Product Selling Guide
Tyres Tyres
SKS XTRA
HEAVY-DUTY TYRES
Manufacturer Profile Construction Size Ply-rating
SKZ Lifemaster
SKS HAULER
18 19
Product Selling Guide Product Selling Guide
Radio Foot throttle Lexan front screen Full door with mesh Road lights Block heater
20 21
Product Selling Guide Product Selling Guide
• 2-speed for wheeled and tracked machines – increases speed • Waste and recycling protection package – level 2 ROPS guard
when roading for quicker travel times and front screen guard
• Biodegradable oils – environmentally friendly alternative • Demolition package – fire extinguisher, level 2 ROPS guard,
• Auxiliary hydraulic coupler placement – left hand side (large front screen guard, twine cutter and heavy-duty rear bars
platform) – allows for placement of competitive attachments • Forestry package – level 2 ROPS guard, front
onto JCB units without changing hose lengths screen guard and heavy-duty rear bars
• Auxiliary circuit low flow return – for use with attachments • Waste and recycling protection package –
requiring a low flow case drain level 2 ROPS guard and lexan front screen Heavy-duty rear bars
• Hydraulic quickhitch – for easy changeover between • Demolition package – fire extinguisher, level 2 ROPS guard,
attachments, ideal for applications that require multiple lexan front screen, twine cutter and heavy-duty rear bars
attachment changeovers • Forestry package – level 2 ROPS guard, lexan front screen and
heavy-duty rear bars
Machine options:
• Enclosed cab additional protection package – level 2 ROPS
• Wide core radiator – for increased cooling ability and used in guard and left and right hand steel mesh to provide protection
applications with high amounts of airborne contaminates over laminated cab glass
• Hardide pivot pins – for severe duty applications
• Spark arrestor exhaust – reduces the risk of sparks being
emitted from the exhaust, ideal for forestry and waste/
recycling applications Level 2 FOPS
Hydraulic quickhitch Left hand auxiliary Twine cutter
• Tool kit (basic) grease gun, wheel brace and tommy bar
• Tool kit (full) grease gun, wheel brace, tommy bar, tool roll
and pressure gauge
• Twine cutter – cuts string, twine, and wire around the axle
shaft and flange to prevent damage to axle seals
Auxiliary couplers with case
* All options may not be available on all models drain and 14 pin connector Lexan Front screen guard
22 23
Product Selling Guide Product Selling Guide
3.5
2.00
3
Gallons
per
Hour
0.50 1
0.5
0.00
JCB
Bobcat
Cat
0
JCB
Bobcat
Cat
Deere
Average run time on a full tank of fuel Average run time on a full tank of fuel
Run
Time
Per
Full
Tank
of
Fuel
Run
Time
Per
Full
Tank
of
Fuel
16.0
10.0
9.0
14.0
8.0
12.0
7.0
10.0
6.0
Hours
Hours
8.0
5.0
9.1
13.9
4.0
7.6
6.0
7.0
7.4
10.8
3.0
4.0
6.6
2.0
2.0
1.0
0.0
0.0
JCB
Bobcat
Cat
JCB
Bobcat
Cat
Deere
24 25
Product Selling Guide Product Selling Guide
Profitability Walkaround –
• 16% lower cost of ownership than the top competitor PowerBoom and quickhitch
• High quality standards resulting in reduced down time • PowerBoom design provides for side entry, allowing the
operator to safely enter and exit the machine without having
• Better SAE service rating indicates quicker and easier contact with loader arm or attachments
serviceability, maximizing machine availability and reducing
• Mechanical quickhitch standard, optional hydraulic quickhitch
service time and costs
available
• Higher levels of productivity means the machine is able to
• 30 JCB approved attachments for increased versatility
perform more work in a given time period than the average
competitor • Auxiliary couplers located on the PowerBoom with an
available option for left side placement of the auxiliary couplers
• Large platform: over 3975 litres per year fuel savings
(based on 50 weeks per year and 35 hours per week) • Quick disconnect auxiliary hydraulic couplers for quick and
efficient attachment hook up
• Small platform: over 2450 litres per year fuel savings
• Low slung design of the PowerBoom provides unobstructed
(based on 50 weeks per year and 35 hours per week)
right side visibility
• Large heavy-duty crowd ram – nearly 3 times the size of
major competition
• All hoses are safely run inside of the PowerBoom, reducing
the chances for damage
• Total unobstructed left side view for safe and efficient operation
• PowerBoom’s design does not require the large rear torque
tube seen on traditional twin arm skid steer and compact track
loaders, providing for unobstructed rearward visibility
• Rear loader tower is designed with a low profile to provide
class-leading all-around visibility
• 30% fewer grease points than the average vertical lift twin arm
skid steer and compact track loader
• PowerBoom contains 20% more steel than both arms
combined on leading competition
26 27
Product Selling Guide Product Selling Guide
28 29
Product Selling Guide Product Selling Guide
attachments without exiting the machine Drive functions Loader and bucket functions
FLOAT
FLOAT
TURN
HORN
HORN PRESS
ONCE
ATTACHMENT
ATTACHMENT ATTACHMENT
SIGNAL/
/
INDICATORS FOR
ONCE
PRESS 2
SPEED.
FOR SECONDARY
SECONDARY THIRD
ATTACHMENT
CREEP
SET
CREEP SET
%
%
TWICE
TWICE
2-speed, FOR
FUNCTION
FUNCTION FUNCTION
3RD FUNCTION
CREEP
FOR CREEP
30 31
Product Selling Guide Product Selling Guide
Panels Panels
Left-hand switch panel Right-hand switch panel
32 33
Product Selling Guide Product Selling Guide
Panels Panels
Instrumentation panel Instrumentation panel
34 35
Product Selling Guide Product Selling Guide
If the machine has lost power and the loader arm cannot be raised the crowd cylinder pin must
be removed first, then the cylinder must be lowered to then be able to tilt the cab with the
loader arm in the lowered position.
36 37
Product Selling Guide Product Selling Guide
38 39
Product Selling Guide Product Selling Guide
Daily, weekly and monthly service schedule Pre-start cold checks, service points
Models 225T, 260T, 300T, 320T
and fluid levels
40 41
Product Selling Guide Product Selling Guide
Pre-start cold checks, service points Pre-start cold checks, service points
and fluid levels and fluid levels
42 43
Product Selling Guide Product Selling Guide
Attachments Attachments
With over 30 JCB attachment families to choose from, the JCB
skid steer and compact track loader can be equipped to handle GENERAL PURPOSE BUCKETS
nearly any task on the jobsite.
LANDSCAPE BUCKETS
54” Width 60” Width 66” Width 72” Width 78” Width 84” Width
14.2 Cu Ft. 15.8 Cu Ft. 17.5 Cu Ft. 19.2 Cu Ft. 20.9 Cu Ft. 22.7 Cu Ft.
Capacity Capacity Capacity Capacity Capacity Capacity
6 IN 1 BUCKETS
60” Width 66” Width 72” Width 78” Width 84” Width
12.2 Cu Ft. 15.8 Cu Ft. 17.2 Cu Ft. 21.7 Cu Ft. 23.4 Cu Ft.
Capacity Capacity Capacity Capacity Capacity
44 45
Product Selling Guide Product Selling Guide
Attachments Attachments
42” Tines 48” Tines Standard Flow High Flow 54” Width 84” Width 96” Width 84” Width 96” Width
25.7 Cu Ft. 21 Cu Ft. 26.8 Cu Ft. 43.9 Cu Ft. 54 Cu Ft.
Capacity Capacity Capacity Capacity Capacity
SILAGE PICK-UPS
60” Width 66” Width 72” Width 78” Width 84” Width
SCRAP GRAPPLES
TRENCHERS BALE SPEAR
60” with 66” with 72” with 84” with 18” Depth 24” Depth 26” 36” 44”
Top Grapple Top Grapple Top Grapple Top Grapple High Flow High Flow Ball Diameter Ball Diameter Ball Diameter
46 47
Product Selling Guide Product Selling Guide
Attachments Attachments
60” Width 60” Width 72” Width 84” Width 96” Width 72” Width 12” Width 16” Width 18” Width 24” Width 30” Width 40” Width
Manual Hydraulic Manual Manual Manual Hydraulic Standard Flow High Flow High Flow High Flow High Flow High Flow
Angle Angle Angle Angle Angle Angle
VIBRATORY ROLLERS
LANDSCAPE RAKES
52” Width 66” Width 78” Width 26” Diameter 30” Diameter
Standard Flow High Flow
48 49
Product Selling Guide Product Selling Guide
50 51
Product Selling Guide Product Selling Guide
MODEL 225 S630 320D L223 256C 5640E MODEL 260 S650 326D L225 252B 6640E
SAE Operated Capacity (ROC) kg 1021 989 907 1021 1066 998 SAE Operated Capacity (ROC) kg 1179 1220 1179 1134 1202 1179
SAE Breakout Force - Lift kg 2501 1814 1588 2309 - - SAE Breakout Force - Lift kg 2669 2177 2268 2309 - -
SAE Breakout Force - Tilt kg 2585 1973 2325 2894 3324 - SAE Breakout Force - Tilt kg 2585 2313 31515 3894 2498 -
Overall Height mm 2083 2057 2007 2042 2103 2057 Overall Height mm 2083 2065 2108 2002 2098 2083
Dump Height mm 2464 2367 2413 2555 2426 2383 Dump Height mm 2464 2446 2540 2555 2413 2408
Hinge Pin Height mm 3175 3073 3023 3289 3122 3124 Hinge Pin Height mm 3175 3150 3175 3289 3200 3157
Wheelbase mm 1219 1151 1067 1321 1240 1080 Wheelbase mm 1219 1151 1219 1321 1219 1229
Machine Width mm 1727 1831 1753 1757 1676 1753 Machine Width mm 1829 1831 1854 1758 1829 1842
Reach At Full Height - Dumped mm 584 544 729 820 599 813 Reach At Full Height - Dumped mm 864 800 838 820 838 894
Net Power kW 55.2 55.4 47 50.7 61.1 62.6 Net Power kW 55.2 55.4 52.2 56.7 52.9 62.6
Optional High Flow lpm 135 115 117 131 125 140 Optional High Flow lpm 135 115 125 131 125 140
System Pressure bar 230 241 214 207 230 - System Pressure bar 230 241 238 207 230 -
Hydraulic Horse Power kW 51.8 46.4 51.8 44.8 47.9 - Hydraulic Horse Power kW 51.8 46.4 49.5 45.2 47.9 -
Operating Weight kg 3497 3496 2994 3348 3477 3574 Operating Weight kg 3616 3777 3685 3583 3566 3692
52 53
Product Selling Guide Product Selling Guide
John New
MANUFACTURER JCB Bobcat Caterpillar Gehl Terex MANUFACTURER JCB Bobcat Caterpillar Case Terex
Deere Holland
MODEL 280 S650 328D 262C V270 TSV-70 MODEL 300 S750 L230 272C SV300 TSV-80
SAE Operated Capacity (ROC) kg 1270 1220 1270 1225 1225 1203 SAE Operated Capacity (ROC) kg 1361 1451 1361 1474 1361 1361
SAE Breakout Force - Lift kg 2669 2177 2268 - - 2663 SAE Breakout Force - Lift kg 2635 2493 2841 - 2309 2663
SAE Breakout Force - Tilt kg 2585 2313 4672 3318 - 2666 SAE Breakout Force - Tilt kg 3260 2536 3894 3318 3894 2666
Overall Height mm 2083 2065 2159 2103 2045 1956 Overall Height mm 2108 2065 2042 2103 2002 1956
Dump Height mm 2464 2446 2565 2449 2515 2464 Dump Height mm 2464 2649 2596 2487 2555 2464
Hinge Pin Height mm 3175 3150 3226 3226 3302 3277 Hinge Pin Height mm 3175 3353 3330 3279 3302 3277
Wheelbase mm 1219 1151 1219 1240 1265 1242 Wheelbase mm 1219 1176 1321 1382 1321 1242
Machine Width mm 1829 1831 1956 1676 1765 1829 Machine Width mm 1829 1831 1930 1676 1768 1829
Reach At Full Height - Dumped mm 864 800 795 780 864 762 Reach At Full Height - Dumped mm 889 800 780 780 744 762
Net Power kW 55.2 55.4 59.7 61.1 62.6 55.2 Net Power kW 68.6 61 62.6 67.1 62.6 61.9
Optional High Flow lpm 135 115 132 125 140 - Optional High Flow lpm 135 138 131 125 131 159
System Pressure bar 230 241 238 230 231 230 System Pressure bar 230 245 207 230 207 230
Hydraulic Horse Power kW 51.8 46.5 52.5 47.9 53.8 - Hydraulic Horse Power kW 51.8 56.4 55.2 47.9 45.2 609
Operating Weight kg 3656 3777 3810 3614 3629 3674 Operating Weight kg 3824 3960 3765 3793 3765 3901
54 55
Product Selling Guide Product Selling Guide
John John
MANUFACTURER JCB Bobcat Caterpillar Gehl Mustang MANUFACTURER JCB Takeuchi Terex Caterpillar
Deere Deere
MODEL 330 S770 332D 272C V330 3330 V MODEL 150T TL220 PT-50 MLT 247B CT 315
SAE Operated Capacity (ROC) kg 1495 1520 1451 1474 1497 1497 SAE Operated Capacity (ROC) kg 680 565 603 683 680
SAE Breakout Force - Lift kg 2635 2490 2994 - - - SAE Breakout Force - Lift kg 1770 2287 2287 - 1225
SAE Breakout Force - Tilt kg 3260 2283 6294 3318 - - SAE Breakout Force - Tilt kg 1820 2187 2187 1842 988
Overall Height mm 2108 2057 2159 2103 2085 2085 Overall Height mm 2007 1981 1956 1981 1956
Dump Height mm 2489 2649 2591 2487 2504 2504 Dump Height mm 2286 2276 2286 2134 2311
Hinge Pin Height mm 3200 3353 3226 3279 3327 3332 Hinge Pin Height mm 3023 2896 2921 2845 2794
Wheelbase mm 1219 1219 1219 1382 1265 1265 Wheelbase mm 1778 - - 1905 -
Machine Width mm 1880 1829 1981 1676 1829 1829 Machine Width mm 1651 1473 1524 1676 1549
Reach At Full Height - Dumped mm 889 800 803 765 813 813 Reach At Full Height - Dumped mm 914 584 584 635 584
Net Power kW 58.6 68.6 66.4 67.1 62.6 62.6 Net Power kW 44.7 38 37.3 41.8 33.6
Optional High Flow lpm 135 138 144 125 137 137 Optional High Flow lpm 70 - - - -
System Pressure bar 230 245 238 230 238 238 System Pressure bar 230 207 207 230 238
Hydraulic Horse Power kW 51.8 56.4 57 47.9 54.5 54.5 Hydraulic Horse Power kW 51.8 19.6 21.2 23.1 24
Operating Weight kg 3959 4162 4159 3793 4087 4087 Operating Weight kg 3022 2864 2821 3174 3084
56 57
Product Selling Guide Product Selling Guide
MODEL 225T T630 323D 279C C232 440CT SVL75 MODEL 260T T650 289C C238 TL250 450CT
SAE Operated Capacity (ROC) kg 1021 1012 1041 1016 1016 953 1043 SAE Operated Capacity (ROC) kg 1179 1166 1222 1207 1190 1225
SAE Breakout Force - Lift kg 2635 - 1678 - 2241 2268 2162 SAE Breakout Force - Lift kg 2635 - - 2241 3878 2400
SAE Breakout Force - Tilt kg 2585 - 2540 3315 3894 3357 2814 SAE Breakout Force - Tilt kg 3260 - 3315 3894 3943 2812
Overall Height mm 2083 2065 2007 2108 2042 2057 2083 Overall Height mm 2083 2057 2116 2042 2319 2121
Dump Height mm 2413 - 2413 2428 2596 2438 - Dump Height mm 2413 - 2456 2596 2431 2405
Hinge Pin Height mm 3175 3073 2997 3129 3330 3091 3025 Hinge Pin Height mm 3175 3150 3129 3330 3203 3120
Wheelbase mm 2108 1489 - 1768 1603 1438 1435 Wheelbase mm 2108 1499 1768 1603 1598 1638
Machine Width mm 1854 1832 1829 1981 1930 - 1674 Machine Width mm 1854 1829 1981 1930 1859 -
Reach At Full Height - Dumped mm 584 610 721 594 864 739 1059 Reach At Full Height - Dumped mm 584 - 780 864 1011 762
Net Power kW 55.2 55.4 43.3 61.1 56.7 61.9 55.4 Net Power kW 55.2 55.4 61.1 62.6 68.6 61.9
Optional High Flow lpm 135 115 152 125 131 143 - Optional High Flow lpm 135 115 125 131 151 158
System Pressure bar 230 241 238 230 207 210 245 System Pressure bar 230 241 231 207 207 210
Hydraulic Horse Power kW 51.8 35 30 31.9 29.4 29.1 29.1 Hydraulic Horse Power kW 51.8 35 31.9 29.4 30.5 29.1
Operating Weight kg 4391 4089 3878 4487 4368 4048 4100 Operating Weight kg 4629 4282 4701 4581 5275 4955
58 59
Product Selling Guide Product Selling Guide
MANUFACTURER JCB Kubota Caterpillar John Deere MANUFACTURER JCB Bobcat John Deere
SAE Operated Capacity (ROC) kg 1361 1365 1318 1315 SAE Operated Capacity (ROC) kg 1451 1508 1497
SAE Breakout Force - Lift kg 2635 3058 - 4683 SAE Breakout Force - Lift kg 2635 - 2994
SAE Breakout Force - Tilt kg 3260 3611 3315 2087 SAE Breakout Force - Tilt kg 3260 - 6294
Overall Height mm 2083 2118 2116 2159 Overall Height mm 2032 2065 2159
Hinge Pin Height mm 3175 3266 3287 3200 Hinge Pin Height mm 3175 3353 3200
Machine Width mm 1981 1961 1981 2007 Machine Width mm 1981 1981 2057
Reach At Full Height - Dumped mm 889 1034 762 818 Reach At Full Height - Dumped mm 889 853 818
Net Power kW 68.6 67.1 67.1 60 Net Power kW 68.6 63.3 66.4
Optional High Flow lpm 135 138 125 160 Optional High Flow lpm 135 138 -
System Pressure bar 230 24.5 230 238 System Pressure bar 230 241 238
Hydraulic Horse Power kW 51.8 38.8 31.9 31.5 Hydraulic Horse Power kW 51.8 35 37.5
Operating Weight kg 4837 5000 4867 4912 Operating Weight kg 4962 6045 5035
60 61
Product Selling Guide Product Selling Guide
62 63
Product Selling Guide Product Selling Guide
64 65
Product Selling Guide Product Selling Guide
JCB versus
New Holland
66 67
Product Selling Guide Product Selling Guide
Notes Notes
68 69