Professional Documents
Culture Documents
MODULAR
FLOW REGULATOR CETOP 3
AM.3.QF type one way non-compen-
Max. operating pressure 350 bar
sated throttle valve are fitted with an
Max. pressure adjustable 250 bar
O-Ring mounting plate which allows
Flow rate regulation on 8 screw turns
its assembly for either input or output
Max. flow 40 l/min
regulation. Adjustment is obtained by
Hydraulic fluids Mineral oils DIN 51524
means of a grub screw or a plastic
Fluid viscosity 10 ÷ 500 mm2/s
knob. They are available in the four
AM.3.QF... Fluid temperature -25°C ÷ 75°C
regulating configurations shown in the
Ambient temperature -25°C ÷ 60°C
SCREWS AND STUDS CH. IV PAGE 21 hydraulic diagrams.
Max. contamination level class 10 in accordance
The standard valve configuration al- with NAS 1638 with filter ß25≥75
lows "meter in" regulation, while it is Weight 1,5 Kg
possible to obtain "meter out" regula-
tion by turning the valve by 180° along
its longitudinal axis.
3
Modular valve
CETOP 3/NG6
Δp (bar) 4
QF Non compensated throttle valve
Δp (bar)
** Control on lines
A / B / P / AB
* Type of adjustment
M = Plastic knob Q (l/min)
C = Grub screw Q (l/min)
** 00 = No variant
V1 = Viton
HYDRAULIC SYMBOLS
4 Serial No.
OVERALL DIMENSIONS
K = OR plate
Type of adjustment
M Plastic knob
C Grub screw
Support plane
specifications