Professional Documents
Culture Documents
Altimeter Set
Cabin Light
HSI Bug
Fadec On/Off
Engine 1 Start Engine 2 Start
Generator 1
Generator 2
Battery Master
Fuel Xfer
Pitot Heat
Strobe Light
Pos Light
Anti Coll Light
Landing Light
Middle Console
In the middle console I have changed something contrary to the real cockpit.
Many engagements are controlled with the display in the Main Panel.
I build in some extra instruments for better conrols.
The “Christoph 7” Rescue Heli ist not equiped with a autopilot system.
I build in a fictive Layout.
GPS 2
GPS 1
click here to
Autopilot display the GPS
Setting in the Panel above
VOR and
COM Freq
Hint:
If you occupy a
jostick button
to “arrest gear”
you can switch
the GPS on and off
Start Procedure:
On the Main Panel:
-Battery Master Switch to on
-Generator 1 and 2 on
Overhead Panel:
-Avionics Master to on
-Strobe Light to on
-Anti Coll Light to on
-Pos Light to on
-Landing Light to on
-Prime Pump 1 and 2 on
Main Panel:
-click and hold mouse button for 3 seconds a little right from the
Engine Switch 1 to start engine 1
-same with engine 2
-the engine switch now on flight position
In real EC-135 the engine switch has 3 position: OFF, IDLE and FLIGHT. The engine
starts automatically in the position IDLE. Before starting the pilot switch to Flight.
Due to X-Plane Limitations I compromise the start procedure.
To shut down the engine toggle the engine switch to OFF
Remember: If you start again you must turn the mixture setting to full rich.