This technical data sheet provides test results for regenerated recycled plastic boards in thicknesses of 6 mm and 12 mm. The boards had low densities between 979-1111 kg/m3, low moisture contents between 1.8-0.6%, and low water absorption levels under 1% after soaking. Other test results showed the boards had low swelling, high modulus of rupture and elasticity, high screw withdrawal and compressive strengths, low thermal conductivity, no disintegration after boiling, and fire resistance of 6-10 minutes before forming lumps with 4-8 minutes before flame penetration.
This technical data sheet provides test results for regenerated recycled plastic boards in thicknesses of 6 mm and 12 mm. The boards had low densities between 979-1111 kg/m3, low moisture contents between 1.8-0.6%, and low water absorption levels under 1% after soaking. Other test results showed the boards had low swelling, high modulus of rupture and elasticity, high screw withdrawal and compressive strengths, low thermal conductivity, no disintegration after boiling, and fire resistance of 6-10 minutes before forming lumps with 4-8 minutes before flame penetration.
This technical data sheet provides test results for regenerated recycled plastic boards in thicknesses of 6 mm and 12 mm. The boards had low densities between 979-1111 kg/m3, low moisture contents between 1.8-0.6%, and low water absorption levels under 1% after soaking. Other test results showed the boards had low swelling, high modulus of rupture and elasticity, high screw withdrawal and compressive strengths, low thermal conductivity, no disintegration after boiling, and fire resistance of 6-10 minutes before forming lumps with 4-8 minutes before flame penetration.
Sr. TEST Result No. 6 mm 12 mm 1 Density , Kg /m3 979 1111 2 Moisture content , % 1.8 0.6 3 Water absorption , % (a) After 2 hrs. soaking 0.19 0.12 (b) After 24 hrs. soaking 0.74 0.24 4 Swelling due to general absorption (after 2 hrs. soaking) 0.10 0.08 (a) Thickness Nil Nil (b) Width Nil Nil (c) Length 5 Swelling due to surface 0.06 0.04 absorption (after 2 hrs. soaking ) 6 Modulus of rupture , N/mm2 22.8 18.8 7 Modulus of elasticity N/ mm2 1960 1630 8 Screw withdrawal strength (a) Face 1617 1665 (b) Edge --- 3211 9 Compressive strength , N/mm2 (a) Parallel to surface 13.4 20.4 (b) Perpendicular to surface 53.2 51.0
10 Thermal conductivity , W/cm 0c 0.005 0.0005
11 Boiling water resistance test No disintegration No disintegration ( after 3 hrs. boiling ) ( intact ) ( intact ( 12 Fire resistance (a) Flammability test 6 minutes (formed as 10 minutes (formed as lump after 9 minutes) lump after 13 minutes) (b) Flame penetration 4 minutes 8 minutes (c) Rate of burning 2 minutes 3 minutes