Professional Documents
Culture Documents
2. To clean beneath the bit and enhance drilling rate, required the mud to have as low
as……………… as possible.
a. Plastic Viscosity c. Mud Density
3. What drilling problem is most directly associated with filtration characteristic of Mud:
a. Shale sloughing c. Drilling rate
b. Differential sticking
b. Solids control
POLITEKNIK ENERGI DAN MINERAL “AKAMIGAS” CEPU
LABORATORIUM HULU MIGAS
Jl. Gajah Mada No. 38 Cepu, Blora, Jawa Tengah
a. Barite c. LCM
b. Sand
7. If the mud contaminated with cement, the mud should be treated w/ additive ………...
b. Soda ash
a. True b. False
a. True b. False
a. True b. False
a. True b. False
a. True b. False
a. True b. False
14. Solids content of an unweight mud can be decreased without decreasing the weight the
mud:
a. True b. False
POLITEKNIK ENERGI DAN MINERAL “AKAMIGAS” CEPU
LABORATORIUM HULU MIGAS
Jl. Gajah Mada No. 38 Cepu, Blora, Jawa Tengah
15. Which is the following system is not can be used to reduce the solids content of a mud:
a. Dilution c. Settling
16. Which one the following device be used to remove colloidal size particle from a mud?
b. Desilter d. Desander
a. True b. False
b. Soda Ash
19. If torque, drag, bridges and fill evident, what mud property should be changed
20. What is the first step in writing a mud program (a properties of mud) after all available well
b. Additive
POLITEKNIK ENERGI DAN MINERAL “AKAMIGAS” CEPU
LABORATORIUM HULU MIGAS
Jl. Gajah Mada No. 38 Cepu, Blora, Jawa Tengah
1. What parameters are measured in a sheet of Drilling Mud Report? Include parameters or
unit!
- Funnel Viscosity
- Apparent Viscosity
- Yield Point
- Gel Strength
8. Barite packed in a sack, weight of one sack is 100 lb. To make drilling mud 100 bbl with