The test report summarizes thickness measurements taken at various locations on a stainless steel tank for Albatraoz Technologies. Measurements were taken at the bottom plate and top cone in 6 locations each, and the main hole, using an ultrasonic thickness gauge. Thickness readings ranged from 5.0 to 8.1 mm across the locations, within the specified material thickness of SS 304.
The test report summarizes thickness measurements taken at various locations on a stainless steel tank for Albatraoz Technologies. Measurements were taken at the bottom plate and top cone in 6 locations each, and the main hole, using an ultrasonic thickness gauge. Thickness readings ranged from 5.0 to 8.1 mm across the locations, within the specified material thickness of SS 304.
The test report summarizes thickness measurements taken at various locations on a stainless steel tank for Albatraoz Technologies. Measurements were taken at the bottom plate and top cone in 6 locations each, and the main hole, using an ultrasonic thickness gauge. Thickness readings ranged from 5.0 to 8.1 mm across the locations, within the specified material thickness of SS 304.
Test Report No: AES/THK/179 Date of Test : 14.10.2020 Page No. : 1 of 1
Name of Client M/s Albatraoz Technologies India private Limited Location 9th floor, 904, Prabhat center, CBD Belapur, Navi Mumbai Material Specification SS 304 Thickness Observed in mm Sr. Location/ Description 1 2 3 Remark No. Qty
Bottom Plate Location 1 8.1 8.0 8.1 Observed
Plate Location 2 5.8 5.8 5.7 Observed Plate Location 3 6.1 5.9 6.1 Observed Plate Location 4 6.0 6.0 6.0 Observed 1 Tank Plate Location 5 5.9 6.0 6.0 Observed Plate Location 6 6.0 6.0 6.0 Observed Top Cone Location 7 6.1 6.1 6.0 Observed Main Hole 5.1 5.0 5.1 Observed Instrument: Digital Ultrasonic Thickness Gauge (EDITION -1) Sr No: 5531-0815(Make: Modsonic) Calibration Date : 27.07.2020 Calibration Due Date : 26.07.2021 Client /Vendor Tested By Witness By