The test report summarizes alloy content testing of material samples from a client's SS 304 tank. Testing found that 6 plate locations and the top cone met SS 304 specifications of 18-20% chromium and 8-11% nickel. The SS 316 nozzle met specifications but the SS 201 nozzle exceeded the maximum manganese content specification. The SS 347 center nozzle alloy contents were also within specifications.
The test report summarizes alloy content testing of material samples from a client's SS 304 tank. Testing found that 6 plate locations and the top cone met SS 304 specifications of 18-20% chromium and 8-11% nickel. The SS 316 nozzle met specifications but the SS 201 nozzle exceeded the maximum manganese content specification. The SS 347 center nozzle alloy contents were also within specifications.
The test report summarizes alloy content testing of material samples from a client's SS 304 tank. Testing found that 6 plate locations and the top cone met SS 304 specifications of 18-20% chromium and 8-11% nickel. The SS 316 nozzle met specifications but the SS 201 nozzle exceeded the maximum manganese content specification. The SS 347 center nozzle alloy contents were also within specifications.
Test Report No: AES/PMI/179 Date of Test : 14.10.2020 Page No. : 1 of 1
Name of Client M/s Albatraoz Technologies India private Limited Location 9th floor, 904, Prabhat center, CBD Belapur, Navi Mumbai Material Specification SS 304 Location/ Alloy Content (%) WO Description Material Qty Cr Ni Mo Mn Sr. Min 18.00 8.00 Remark Specified Spec. No. Requirement Max 20.00 11.00 Bottom Plate 18.23 8.01 Acceptable Location 1 Plate Location 18.01 8.02 Acceptable 2 Plate Location 18.27 8.01 Acceptable 3 Plate Location 18.02 8.03 Acceptable SS 304 4 Plate Location 18.07 8.02 Acceptable 5 Plate Location 1 Tank 18.02 8.10 Acceptable 6 Top Cone 18.20 8.02 Acceptable Location 7 Main Hole 18.08 8.05 Acceptable Nozzle SS 316 16.12 10.08 2.03 Observed Size : 1 1/2'' Nozzle SS 201 16.30 3.76 Observed Size : 1 1/2'' 6.95
SS 347 Center Nozzle 17.85 10.60 Nb-0.50 Observed
Size : 3'' Instrument Identification: HITACHI XMET 8000 SMART Serial No. : 811924 Calibration Date : 07.03.2020 Calibration Due Date : 06.03.2021 Client /Vendor Tested By Witness By
Doc. No & Dt - AES/FM/017 (01-06-2019) Rev No- 00 Rev Date - 00