This document is a cost estimate for manufacturing a part using stainless steel. It lists the raw material as stainless steel weighing 1 kg and costing 87 rupees. It then lists the costs for cutting, lathe work, surface grinding, cylindrical grinding, totaling 485 rupees. Additional costs include 3% rejection at 14.55 rupees, overhead and profit of 15% adding 74.93 rupees, and a low volume allowance of 28.72 rupees, for a final part cost of 603.21 rupees.
This document is a cost estimate for manufacturing a part using stainless steel. It lists the raw material as stainless steel weighing 1 kg and costing 87 rupees. It then lists the costs for cutting, lathe work, surface grinding, cylindrical grinding, totaling 485 rupees. Additional costs include 3% rejection at 14.55 rupees, overhead and profit of 15% adding 74.93 rupees, and a low volume allowance of 28.72 rupees, for a final part cost of 603.21 rupees.
This document is a cost estimate for manufacturing a part using stainless steel. It lists the raw material as stainless steel weighing 1 kg and costing 87 rupees. It then lists the costs for cutting, lathe work, surface grinding, cylindrical grinding, totaling 485 rupees. Additional costs include 3% rejection at 14.55 rupees, overhead and profit of 15% adding 74.93 rupees, and a low volume allowance of 28.72 rupees, for a final part cost of 603.21 rupees.