Professional Documents
Culture Documents
What are
three (3) Mark for
parameters Review
that are (1) Points
configurable
only when
creating an
Advanced
Storage
Profile?
(Select 3)
Redundancy
2. From where is the Oracle FS1 System Manager software available for
download to the local host? Mark for Review
(1) Points
3. Pick the best answer to the following question: What was the FS1 specifically
architected to support Mark for Review
(1) Points
Autotiering
Ease of Provisioning
4. On the status bar of the Oracle FS1 System Manager, how is a "warning"
condition indicated? Mark for Review
(1) Points
5. Which three (3) pieces of statistical data can be displayed in a LUN Trending
chart? (Select 3) Mark for Review
(1) Points
6. How
many Mark for
tiers of Review
storage (1) Points
are
available
on the
Oracle
FS1-2
4 (*)
3
Incorrect, refer to the "FS1 Flash Storage System
Administration for 6.x" training for more information
7. What three (3) functions can be performed after connecting to the IP address or
hostname of the FS1 via a web browser? (Select 3) Mark for Review
(1) Points
8. What are two (2) benefits of using Storage Domains? (Select 2)
Mark for Review
(1) Points
10. Which of the following methods is not a recommended method of sending a log
bundle tar file to FS1's customer support center? Mark for Review
(1) Points
Via email to FS1's customer support address (*)
Correct
11. Which
task is Mark for
the FS1 Review
MaxMan (1) Points
GUI not
able to
perform?
12. What are three (3) features of the FS1 Path Manager? (Select three)
Mark for Review
(1) Points
Increased throughput
8 (*)
Other Number
15. Which document should be consulted for a detailed description of each status
LED? Mark for Review
(1) Points
16. Select the
correct Mark for
statement Review
describing (1) Points
the
Automated
Data
Optimization
(ADO)
feature of
Advanced
Compression
17. How many Disk Enclosures may be attached to a SAS back end string?
Mark for Review
(1) Points
20 or 30
5 (*)
18. When creating a LUN, what type(s) of organizational units can it be assigned
to? Mark for Review
(1) Points
10
17
23 (*)
21. Reporting
Schedules Mark for
are Review
configured (1) Points
to run at
regular
intervals.
Which of
the
following
intervals
is not a
valid
interval?
Run Once
Monthly (*)
Weekly
Daily
Correct
22. The Oracle Flash Storage System is engineered for flash. Select the storage
configurations options available for the FS1. Mark for Review
(1) Points
Flash/Tape/ or Both
HDD Only
Flash Only
Switch Ethernet
24. What is the "Hold Up" time for the NVDRAM Write Cache after a power
outage? Mark for Review
(1) Points
2 weeks
Infinite (*)
1 Month
72 Hrs.
48 Hrs.
25. How many tiers of storage can be configured concurrently within a Storage
Domain? Mark for Review
(1) Points
4 (*)
None of these
26. Select the
correct Mark for
advantage Review
for the (1) Points
following
architectural
differentiator:
QoS PLUS -
Business
Driven Auto-
tiering
27. What does it mean when a host is shown as "Hostname Unknown" in the
"SAN -> Hosts" window of the Oracle FS1 System Manager? Mark for Review
(1) Points
It is referenced by the World Wide Number of its Host Bus Adapter. (*)
28. What are three (3) ways that a Call-Home procedure can be initiated?
(Select three) Mark for Review
(1) Points
Via fs1cli_callhome
C (*)
Thin Provisioning will allow growth across multiple Storage Classes. (*)
Available capacity must exist within the assigned Storage Class. (*)
31. What is the
function of Mark for
the Review
Background (1) Points
Copy
Priority?
It initiates a full QoS migration when Disk Enclosures are added to a FS1
Flash Storage System.
It temporarily changes the QoS Priority.
32. Which types of disk drives are available for use in a FS1 Flash Storage
System? Mark for Review
(1) Points
Do not exit Guided Maintenance without performing all the steps in the
wizard.
Always remove the selected FRU, even if only testing the replacement
procedure.
Ignore System Alerts until after Guided Maintenance has been
completed.
Correct
34. Which of the following methods is not a valid method of installing the Oracle
FS1 System Manager software? Mark for Review
(1) Points
By downloading a .rpm file and running a batch file or shell script (*)
35. When iSCSI is utilized, which technology used to reduce overhead and
improve performance on the host systems? Mark for Review
(1) Points
Thin Provisioning
Auxiliary I/O cache
36. Which two
(2) Mark for
statements Review
concerning (1) Points
a Storage
Profile are
true?
(Select 2)
37. What are three (3) types of reports that can be scheduled to run regularly?
(Select 3) Mark for Review
(4) Points
iSCSI Hosts
NAS Hosts
Correct
Correct
40. What are three (3) types of failure that the FS1 Path Manager protects
against? (Select three) Mark for Review
(1) Points
Pilot failure
41. Which
statement Mark for
best Review
describes (1) Points
the FS1?
Maximizes the power of flash with the option of exploiting the economics
of disk! (*)
Improved HDD centric performance based on newer faster server
technology!
Maximizes the power of disk with the option of using flash!
42. Which three (3) statements about a Copy LUN are true? (Select three)
Mark for Review
(1) Points
Its initial QoS settings may be different than the original LUN. (*)
43. Comparing the backend bandwidth of the FS1 to the Axiom 600, how much
faster is the FS1? Mark for Review
(1) Points
15
4.5X
10X
9X (*)
44. What must be done within the Oracle FS1 System Manager to configure an
SNMP trap? Mark for Review
(1) Points
46. How is
storage Mark for Review
assigned (1) Points
to a
Storage
Domain?
By RAID group
By Volume (*)
By Storage Class
47. Which three (3) statements concerning a FS1 Flash Storage System reset are
true? (Select three) Mark for Review
(1) Points
High-Speed Failover
Fast storage performance for critical applications, database data and BIDW
systems
High performance, reliable data access, backup and recovery
Correct!
49. When there are multiple Power Distribution Units (PDUs) in a rack, they must all
be powered on within how many seconds? Mark for Review
(1) Points
15
30
10 (*)
20
51. Which
three (3) Mark for Review
statements (1) Points
about a
Clone LUN
are true?
(Select
three)
It has the same initial QoS settings as the original LUN. (*)
It is read-only.
52. What are condition that must be met before a new Storage Domain can be
created? Mark for Review
(1) Points
A Storage Profile must exist for setting the Storage Domain QoS
parameters.
A Storage Domain license must be installed.
There must be at least one Disk Enclosure that contains no volumes. (*)
53. What is the minimum number of people needed to safely when moving a
loaded FS1-2 Racked-Mounted System? Mark for Review
(1) Points
3 (*)
54. What 2 reasons show why a customer would implement Storage Domains?
Mark for Review
(2) Points
55. Which two (2) statements concerning Storage Domains are true? (Select 2)
Mark for Review
(1) Points
56. What is
the Mark for
primary Review
function (1) Points
of the
Pilot?
Lots of throughput
58. What is "staging" in the context of performing a software update on a FS1 Flash
Storage System? Mark for Review
(1) Points
Loading the software package into the FS1 Flash Storage System and
validating it (*)
Moving the software package from a temporary directory to its permanent
directory
59. Which of the following uses is not a suggested use of Storage Domains?
Mark for Review
(1) Points
60. Which two (2) pieces of information are displayed in the Status Bar of the Oracle
FS1 System Manager? (Select two) Mark for Review
(1) Points
Storage utilization
Time Zone
Correct
2. What is the minimum number of people needed to safely when moving a loaded
FS1-2 Racked-Mounted System? Mark for Review
(1) Points
3 (*)
Correct
3. When there are multiple Power Distribution Units (PDUs) in a rack, they must all
be powered on within how many seconds? Mark for Review
(1) Points
30
10 (*)
20
15
Correct
4. The FS1 has the fasted failover in the portfolio at:
Mark for Review
(1) Points
<5 seconds
<1 minute
<10 seconds
Switch Ethernet
Correct!
6. "Single
pane-of- Mark for
glass Review
management (1) Points
with
MaxMan"
addresses
which
customer
challenge for
legacy SAN?
Adhering to SLA's
8. The performance of which two (2) items can be monitored within the Oracle
FS1 System Manager? (Select 2) Mark for Review
(1) Points
Filesystems
Volume groups
Disk Enclosures
LUNs (*)
9. Which two (2) actions should be performed prior to a software update? (Select
two) Mark for Review
(1) Points
Disable Call-Home.
Download and unpack the compressed tar file containing the update
software. (*)
Run pdscompat to verify that the new software is compatible with theFS's
hardware matrix.
10. Which three (3) statements about a Copy LUN are true? (Select three)
Mark for Review
(1) Points
Correct
Correct
12. What are three (3) parameters that are configurable only when creating an
Advanced Storage Profile? (Select 3) Mark for Review
(1) Points
Redundancy
Correct
14. Which three (3) pieces of statistical data can be displayed in a LUN Trending
chart? (Select 3) Mark for Review
(1) Points
Correct
15. Which two (2) pieces of information are displayed in the Status Bar of the
Oracle FS1 System Manager? (Select two) Mark for Review
(1) Points
Time Zone
Storage utilization
Correct
16. Which
statement Mark for
best Review
describes (1) Points
the
performance
of MaxRep
3.0?
17. Select the correct statement describing the Automated Data Optimization
(ADO) feature of Advanced Compression Mark for Review
(1) Points
Only Oracle Storage, with HCC support, enables customers to realize the
full value of ADO
ADO enables HCC on 3rd party storage (*)
Correct!
18. What are two (2) benefits of using Storage Domains? (Select 2)
Mark for Review
(1) Points
Correct
19. On the status bar of the Oracle FS1 System Manager, how is a "warning"
condition indicated? Mark for Review
(1) Points
Correct
20. What are three (3) types of failure that the FS1 Path Manager protects
against? (Select three) Mark for Review
(1) Points
Pilot failure
Correct
21. What
is a Mark for
Clone Review
LUN? (1) Points
A point-to-time copy of a LUN which utilizes the same amount of disk space as
the original LUN
A block-level copy of a LUN which utilizes less disk space than the original LUN
A block-level copy of a LUN which utilizes the same amount of disk space as
the original LUN
A point-in-time copy of a LUN which utilizes less disk space than the original
LUN (*)
Correct
Loading the software package into the FS1 Flash Storage System and
validating it (*)
What is "staging" in the context of performing a software update on a FS1
Flash Storage System?
Moving the software package from a temporary directory to its permanent
directory
Converting the downloaded software into the proper format for installing
Correct
24. When must a Performance Controller be configured. (Pick all that are true)
a) > 20 Disk Enclosures Mark for Review
b) Application is cache friendly (1) Points
c) Customer has budget to afford it
d) Customer plans to upgrade to a FS1-16 later
a & d (*)
a&b
b&c
a&c
b&d
4 (*)
None of these
Correct!
26. What is
the Mark for
function Review
of the (1) Points
PMI?
27. From which Oracle FS1 System Manager navigation tab is the Event Log viewed?
Mark for Review
(1) Points
Correct
28. The Oracle Flash Storage System is engineered for flash. Select the storage
configurations options available for the FS1. Mark for Review
(1) Points
Flash Only
Flash/Tape/ or Both
HDD Only
Correct!
29. From which tab in the Oracle FS1 System Manager navigation pane can you view
the current software version installed on system components? Mark for Review
(1) Points
Support (*)
Monitor
Protect
Configure
Correct
30. What does it mean when a host is shown as "Hostname Unknown" in the "SAN ->
Hosts" window of the Oracle FS1 System Manager? Mark for Review
(1) Points
It is referenced by the World Wide Number of its Host Bus Adapter. (*)
Correct
Previous Page 6 of 12 Next Summary
31. When
performing Mark for
Guided Review
Maintenance, (1) Points
which of the
following
statements is
not a
recommended
precaution?
Do not exit Guided Maintenance without performing all the steps in the
wizard.
Never manually turn off power to a component. (*)
Correct
32. What are three (3) features of the FS1 Path Manager? (Select three)
Mark for Review
(1) Points
Increased throughput
Correct!
33. What is the "Hold Up" time for the NVDRAM Write Cache after a power
outage? Mark for Review
(1) Points
1 Month
72 Hrs.
2 weeks
Infinite (*)
48 Hrs.
Correct!
34. How is FS1 MaxMan configured to monitor a particular set of FS1 Storages?
Mark for Review
(1) Points
Browse for available FS1 Flash Storage Systems and add them to a list
in the ASSM GUI.
Create a list of FS1 Flash Storage Systems under the Configuration tab
and save it in the Managed Hosts navigation folder.
Define a list of FS1 Storage Systems and save it to a file on the local
host. (*)
No configuration is necessary. All FS1 Flash Storage Systems are
automatically displayed in MaxMan.
36. Which of
the Mark for
following Review
uses is (1) Points
not a
suggested
use of
Storage
Domains?
Correct
37. Which two (2) statements about a Pilot are true? (Select two)
Mark for Review
(1) Points
Correct
A Call-Home is initiated
40. Select the correct advantage for the following architectural differentiator:
Enterprise Grade Mark for Review
(1) Points
41. Which two
(2) port Mark for
connection Review
protocols (1) Points
are
available
via a SAN
Generation
3 Network
Interface
Module
(NIM)?
(Select
two)
iFCP
SCSI
iSCSI (*)
42. Which two (2) statements concerning the FS1 MaxMan GUI are true? (Select
two) Mark for Review
(1) Points
43. When performing Guided Maintenance, what does the Identify button do?
Mark for Review
(1) Points
Displays in the Oracle FS1 System Manager the rack location of the faulty
component
Blinks LEDs on all non-faulty components (*)
Displays in the Oracle FS1 System Manager the serial number of the faulty
component
Correct
44. What are condition that must be met before a new Storage Domain can be
created? Mark for Review
(1) Points
A Storage Profile must exist for setting the Storage Domain QoS
parameters.
There must be at least one Disk Enclosure that contains no volumes. (*)
46. Select the
Mark for
correct Review
advantage (1) Points
for the
following
architectural
differentiator:
Application
Profiles
47. Which types of disk drives are available for use in a FS1 Flash Storage
System? Mark for Review
(1) Points
Correct
Correct
49. Oracle now has a complete line of enterprise storage products, which of
these provides an enterprise-grade SAN solution? Mark for Review
(1) Points
StorageTek
FS1 (*)
Engineered Systems
ZS3
Correct
50. Which document should be consulted for detailed instructions for installing
connecting brackets and plates? Mark for Review
(1) Points
Correct
51. What
must be Mark for
done Review
within (1) Points
the
Oracle
FS1
System
Manager
to
configure
an SNMP
trap?
Correct
52. Which two (2) statements concerning Storage Profiles are true? (Select 2)
Mark for Review
(1) Points
An Advanced Storage Profile can be created only by a user with the Primary
Administrator role.
Additional Storage Profiles can be created. (*)
192
80
416 (*)
384
208
Correct
Previous Page 11 of 12 Next Summary
56. On a
capacity Mark for
basis, Review
expressed (1) Points
as a
percentage
, how much
more space
is used by
RAID 6 vs.
RAID 5?
0.12125
0.1
0.15
0 (*)
Correct
58. What two (2) functions can be performed after connecting to the IP address
or hostname of the FS1 via a web browser? (Select 2) Mark for Review
(1) Points
Determine the serial number and software version of the FS1 (*)
Incorrect, refer to the "FS1 Flash Storage System
Administration for 6.x" training for more
information
Correct!
60. Select the correct advantage for the following architectural differentiator: QoS
PLUS - Business Driven Auto-tiering Mark for Review
(1) Points
Correct!