Professional Documents
Culture Documents
The below mentioned maintenance schedule is recommended for the tightening of the
Piston Crown Bolts.
Remarks: 1. Thoroughly inspect the piston body top and crown mating seat. When fretting
marks of wear are observed, they shall be corrected to maintain adequate
contact.
2. Check the tightness of crown bolt whenever overhauling the piston and renew
the tab washer as well as the lock nut.
3. When using new bolts, apply embedding of the threads by tightening the bolt
at least three times before complete tightening.
* Use lubricant such as Molykote 1000.
4. Tighten the crown bolt with the specified torque as stated in the instruction
book.
Legal Notice
Copyright 2000 by marine industrial concerns s.a..
All rights reserved. E-mail comments to Webmaster
Updated 09.11.2004