Professional Documents
Culture Documents
1
Mechanics of Deformable Bodies
Prob 02: The two rods are used to support a crate with weight of 2kN. The rod are made of the same material and of Final answer
the same diameter. If the failure tensile normal stress for this material is 200 mPa, what is the minimum required
diameter for the rods in mm? (2 points)
2
Mechanics of Deformable Bodies
Prob 03: The bar of the truss each have a cross-sectional area of 1.25 in2. Determine the average normal stress in Final answer
each member due to the loading P = 8 kips. State whether the stress is tensile or compressive (6 points)
3
Mechanics of Deformable Bodies
Prob 04: Structural steel buildings frequently are designed with diagonal bracing systems to resist lateral loads. A Final answer
certain bracing system is subjected to the following loads: dead load = 13.3 kips, occupancy live load = 6.9 kips, roof
live load = 1.3 kips, wind load = 150.6 kips, and earthquake load = 161.1 kips
a. Determine the required factored load capacity for LRFD. Which load combination controls? 4 points
b. Determine the required ASD load capacity. Which load combination controls? 4 points
4
Mechanics of Deformable Bodies