You are on page 1of 2

UPTIME MAINTENANCE PLANNER

670GLC (PIN: 1FF670GX_ _E670001— )

As Required
• Drain fuel tank sump • Check and clean air cleaner dust unloader valve
• Drain primary fuel filter and water separators • Check and adjust air conditioner v-belt
• Drain final fuel filter and water separators • Check windshield washer fluid level
• Clean radiator air inlet screen • Check and adjust track sag
• Clean rear camera lens • Remove and clean fuel tank inlet screen
• Add coolant extender as indicated by COOL-GARD™ II test strips
Every 10 Hours or Daily
• Check engine oil level • Lubricate working tool pivots and links
• Check hydraulic oil level • Lubricate hydraulic coupler—if equipped
• Check coolant level in recovery tank
Every 50 Hours
• Lubricate front end pin joints
Every 100 Hours
• Inspect and re-torque track hardware
Every 250 Hours
• Check battery electrolyte level and terminals • Check pump drive gear case oil level
• Check swing gear case oil level • Drain hydraulic tank sump
• Check travel gear case oil level • Take engine oil sample
Every 500 Hours
• Lubricate swing bearing gear • Drain and refill engine oil and replace filters
• Lubricate swing bearing • Take hydraulic oil sample
• Check air intake hoses • Take swing gear case oil sample
• Replace primary fuel filter and water separators • Take travel gear case oil sample
• Replace final fuel filter and water separators • Take pump drive gear case oil sample
• Replace pump case drain filter • Take diesel fuel sample
• Clean cab fresh air and cab recirculating air filters (replace every 6th • Take engine coolant sample
cleaning)
Every 1000 Hours
• Drain and refill swing gear case oil • Replace air conditioner v-belt
• Drain and refill pump drive gear case oil • Replace pilot system oil filter
• Check coolant • Replace hydraulic tank cap breather element
• Adjust engine valve lash • Replace hydraulic tank oil filter
• Replace air cleaner elements
Every 2000 Hours
• Drain and refill travel gear case oil
Every 4000 Hours
• Drain and refill hydraulic tank oil and clean suction screen • Drain, flush, and refill cooling system
Every 4500 Hours
• Service exhaust filter

T293311 16APR15
T293313-28 | T293312-63
UPTIME MAINTENANCE PLANNER

REQUIRED PARTS
Every Every Every Every Every Every
Description Part Number 250 500 1000 2000 4000 4500
Hours Hours Hours Hours Hours Hours
Engine Oil Filter Element 1132402322 2 2 2 2 2
Final Fuel Filter 4719921 2 2 2 2 2
Primary Fuel Filter Element 4676385 2 2 2 2 2
Pump Case Drain Filter Element 4363399 1 1 1 1 1
Swing Bearing Gear Access Cover Gasket 4292765 1 1 1 1 1
Hydraulic Tank Oil Filter Element 4654745 2 2 2
Hydraulic Tank Cap Breather Element 4437838 1 1 1
Pilot System Oil Filter Element 4630525 1 1 1
Primary Air Filter Element AT179371 1 1 1
Secondary Air Filter Element AT179370 1 1 1
Air Conditioner V-Belt 4612763 1 1 1
Engine Rocker Arm Cover Gasket—Upper 1111731191 1 1 1
Diesel Particulate Filter 8981525570 1
(component of exhaust filter)
Cab Fresh Air Filter 4S00686 As Required
Cab Recirculating Air Filter FYA00001490R As Required
Dust Unloader Valve 4474785 As Required
John Deere PLUS-50™ II Oil:
—Engine1 TY26674 57.0 L 57.0 L 57.0 L 57.0 L 57.0 L
(15.1 gal.) (15.1 gal.) (15.1 gal.) (15.1 gal.) (15.1 gal.)
—Pump Drive Gear Case1 TY26674 6.2 L 6.2 L 6.2 L
(1.6 gal.) (1.6 gal.) (1.6 gal.)
API GL-5 Gear Oil:
—Swing Gear Case (both)1 TY6296 21.0 L 21.0 L 21.0 L
(5.6 gal.) (5.6 gal.) (5.6 gal.)
—Travel Gear Case (both)1 TY6296 32.0 L 32.0 L
(8.4 gal.) (8.4 gal.)
Hitachi SUPER EX 46HN Hydraulic Oil1 2908-050 380.0 L
(100.0 gal.)
COOL-GARD™ II Pre-Mix TY26575 70.0 L
(18.5 gal.)
Coolant Extender TY26603 As Required
2
Fluid Analysis Kits:
Diesel Engine Oil AT346594 1 1 1 1 1 1
Hydraulic Oil AT346594 1 1 1 1 1
Swing Gear Case Oil AT346594 2 2 2 2 2
Travel Gear Case Oil AT346594 2 2 2 2 1
Pump Drive Gear Case Oil AT346594 1 1 1 1 1
Diesel Fuel AT180344 1 1 1 1 1
Engine Coolant TY26873 1 1 1 1 1
COOL-GARD™ II Test Strips TY26605 1 1 1
1
See operator's manual for recommended oil type and oil viscosities based on operating temperatures.
2
Based on fluid analysis results, intervals may need to be adjusted for your operating conditions. Consult local John Deere dealer.

T293311 16APR15
T293313-28 | T293312-63

You might also like