Professional Documents
Culture Documents
MECHANICAL CALCULATION
TANKY 53 KL
1. PURPOSE
This calculation will determine the Tank data sheet parameters, and minimum thickness required.
2. DESIGN CRITERIA/INPUTS
2.1. INPUTS
Design Code : ASME SECTION VIII Div.1 Latest Edition
Nominal Capacity : 55 KL
Net Working Capacity (Capacity at HHLL) : 53 KL
Size
Inside Diameter : 98.425 Inch
Lengt (T/T) : 36.625 Inch
Design Internal Pressure : 50.000
Design Temperature : 104 o
F
Operating Pressure : ATM
Operating Temperature : AMB o
F
Fluid : H 50
Specific Gravity : -
Min. Design Metal Temp. (MDMT) : -20 o
F
Corrosion Allowance : 0.125 Inch
Joint Efficiency (Shell&Head) : 0.85
Post Weld Heat Treatment ; No
Impact Test : No
Wind Speed : ASCE 95 with wind speed 85 mph
Seismic Zone : ASCE 7 and SNI 03-1726-2002 Zone 2
Radiography : Full
Post Weld Heat Treatment (PWHT) : No
Impact Test : No
2.2. MATERIAL :
Shell, Head , Reinforced Pad : SA 516 Gr.70
Saddle : SA 36
Base PLate : SA 36
Structurals : SA 36
Reinforcement Pad : SA 516 Gr.70
Nozzle
Pipe : SA 106 Gr. B
Plate : SA 516 Gr.60
Flange : SA 105
Gasket : Spirall wound gasket
External Bolt / Nut : SA 193 Gr. B7 / SA 194 GR. 2H
Internal pipe / plate : SA 106 Gr. B / SA 36
Anchor Bolt : SA 307 Gr. B
4. CALCULATION RESULT
4.1. Calculations were performed using PV Elite developed in house by PT. Intesco Global Internusa for thickness Shell, Head, Nozzle and Saddle.
4.2. Calculation for structural using Staad Pro, developed in house by PT.Intesco Global Internusa.
4.3. The result of the calculations are placed in subsequent pages.
SUMMARY OF CALCULATION
Calculation
Shel Thickness : 0.394 Inch
Head Thickness (After Forming) : 0.394 Inch
Saddle
Quantity : 4 Ea
Rib Plate : 0.375 Inch
Web Plate : 0.375 Inch
Base Plate
Size : 93.5 Inch
Base Plate Thickness : 1 Inch
Saddle Reinforcing pads
Size width : 0.375 Inch
Anchor Bolt
Diameter : 1 Inch
Quantity : 8 ea
Bolt Circle Diameter : NA Inch
Maximum Allowable
Hydrostatic working pressure (MAWP)
Test Pressure : Full52.417
of Water psig 0
Hydrostatic Test Pressure : 68.142 psig
ESTIMATED WEIGHT
Empty : 10,543 Kg
Operating : 58,512 Kg
Full Water : 69,004 Kg
5. CONCLUSION
5.1. Base on the calculation report, minimum requirement for the thickness each part (Shell, Head, Nozzle, Saddle, Etc) shall be fulfilled.
Note :
1. For Detail Calculation, see attachment
ATTACHMENT 1
REPORT PV Elite