Professional Documents
Culture Documents
com
FD Series
HYUNDAI WIA Column Moving Type Vertical Machining Center
Technical Leader
The Vertical Machining Center FD Series designed by Hyundai WIA with years of expertise and the latest
technology, is a column moving type machining center equipped with Dual Table to maximize productivity.
F410D ● ●/○ ● ●
F500D ● ● ○ ○ ● ● ○
F600D ● ● ○ ● ● ○
●: Standard ○: Option
For more information, contact Hillary Machinery at (877)902-3751 or www.hillaryinc.com
For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com
FD Series
● High precision main spindle designed with P4 Angular Contact Ball Bearings
● High power/torque main spindle for heavy duty cutting
● Dual Tables for enhanced productivity
● Latest Servo ATC for the fastest tool change time in the class
● Combination of Roller Type LM Guide and Box Guide for optimal feed (F500D)
● Roller Type LM Guide on all axes for high precision heavy cutting (F600D)
● Latest SIEMENS 828D Controller with wide range of support software
01
FD Series
F410D Basic Features
High Speed & Productivity Vertical Machining Center
01
Moving Column
The F410D is designed with a moving column in order to maximize productivity of the incorporated Dual Table. In addition, due to the enlargement
of the column's width and symmetrical heat behavior column structure, heat displacement is minimized and machining accuracy is increased.
02 03
LM Guideway Double Anchored Ball screw
F410D Ball Type LM Guide provides reduction of noise while in In order to eliminate thermal growth and increase accuracy, all
motion, and reduction of non-cutting time due to superior axes are driven by high precision double anchored ballscrews.
travel speed. The double anchored and pretensioned design provides
outstanding positioning and repeatability with virtually no thermal
growth.
04
Dual Table
High speed 180º index rotating table increases productivity by providing the
ability to load and unload on the outer table while processing on the other
table.
)
.1″
16 65
1 0 ( .3″) 56
2( 0(
4 (1 22 25.6
0 35 .1″ ″)
18 ) )
5 (7″ R280 (11″)
25 ″)
(10
500 (19.7″)
0
″)
50
7.2
(Ø4
356 (14)
500 (19.7″)
200
(4.48″)
Ø1
114
420 (16.5″)
Basic Features
MACHINE TOOL
HYUNDAI WIA
05
01
FD Series
04
03
04
+
05
[SIEMENS]
For more information, contact Hillary Machinery at (877)902-3751 or www.hillaryinc.com
For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com
02FD Series
F500D Basic Features
High Speed & Productivity Vertical Machining Center
01
Moving Column
The F500D is designed with a moving column in order to maximize productivity of the incorporated Dual table. In addition, due to the enlargement
of the column's width and symmetrical heat behavior column structure, heat displacement is minimized and machining accuracy is increased.
02 03
Hybrid Type Slideway Double Anchored Ball screw
Each axis on F500D is designed with slideways optimized to the In order to eliminate thermal growth and increase accuracy, all
axis. Sturdy Box Guide on Z-axis for heavy loads, and Roller axes are driven by high precision double anchored ballscrews.
Type LM Guides on X and Y axis for optimal travel ability.
The double anchored and pretensioned design provides
outstanding positioning and repeatability with virtually no thermal
growth.
5 R280 (11″)
25 2
9.
0(
(1.2″)
0″)
(1
0
″)
50
7.2
the ability to load and unload on the outer table while processing on the R75 (2.9″)
(Ø4
356 (14)
Ø1
114
420 (16.5″)
(5.7″)
355 (13.9″)145
TLM (Opt.)
Interference Area
700
(27
.5″)
Basic Features
MACHINE TOOL
HYUNDAI WIA
03
05
01
FD Series
04
06
+
07
After 2.1 sec 13% reduction After 4.3 sec 15% reduction
[SIEMENS]
For more information, contact Hillary Machinery at (877)902-3751 or www.hillaryinc.com
For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com
03
FD Series
F600D Basic Features
High Speed & Productivity Vertical Machining Center
01
Moving Column
The F600D is designed with a moving column in order to maximize productivity of the incorporated Dual table. In addition, due to the enlargement
of the column's width and symmetrical heat behavior column structure, heat displacement is minimized and machining accuracy is increased.
02 03
Roller Type LM Guide Double Anchored Ball screw
The travel mechanism on F600D is equipped with Roller In order to eliminate thermal growth and increase accuracy, all
Type LM Guide for rigidity and reducing idle time. axes are driven by high precision double anchored ballscrews.
The double anchored and pretensioned design provides
Rapid Traverse Rate outstanding positioning and repeatability with virtually no thermal
42 m/min growth.
(1,653.5 ipm)
Dual Table .6
7″
(25
9.
(1.2″)
0
(1
65 .8
67 7″) 174
30
500 (19.7″)
R305 (12″)
500 (19.7″)
500 (19.7″)
115
700 900
(27 (35
.5″) .4″)
Basic Features
MACHINE TOOL
HYUNDAI WIA
05
FD Series
04
02
08
+
09
After 2.0 sec 13% reduction After 4.2 sec 26% reduction
04
FD Series
High Precision Spindle
Long Lasting High Accuracy & Excellent Performance
Vertical Machining Center
Spindle
MACHINE TOOL
HYUNDAI WIA
Direct Type Spindle (F500D/600D)
FD Series
coupling also minimizes vibration and heat transfer from the motor
preventing thermal displacement.
Spindle Cooling
The spindle cooling system minimizes thermal displacement which can
happen during lengthy machining operations, and offers continued
accuracy based on the thermal stability.
FANUC Spindle
F410D (10,000r/min, Belt) F500D/600D (8,000r/min, Belt)
Power (kW[HP]) Torque (N∙m[lbf∙ft]) Power (kW[HP]) Torque (N∙m[lbf∙ft])
F500D
Power (10,000r/min,
(kW[HP]) Belt)
Torque (N∙m[lbf∙ft]) F500D/600D (12,000r/min, Direct)
Power (kW[HP]) Torque (N∙m[lbf∙ft])
Spindle
Machining Capability
MACHINE TOOL
HYUNDAI WIA
F500D
FACE MILL 〈Material〈JIS〉:S45C(Carbon steel)〉
FD Series
DRILL 〈Material〈JIS〉:S45C(Carbon steel)〉
12
TAP. 〈Material〈JIS〉:S45C(Carbon steel)〉 +
Tap spec./Pitch M42 x P4.5 Rigid Tapping 13
Cutting depth 42 mm (1.65″)
Cutting speed 7 m/min (0.27″) The standard Rigid Tapping function allows fast and
Spindle rpm 53 r/min accurate tapping, leading to high efficiency and tool
Traverse rate 4.5 mm/rev (0.177″/rev)
life extension.
Sample Workpieces
05
FD Series
ATC & Magazine
High Productivity with
High Rigidity and Accurate Machining
Peripheral Device
MACHINE TOOL
HYUNDAI WIA
Servo ATC
Adopting the Twin Arm Servo ATC further enhances position control
and shortens tool change time, maximizing productivity.
FD Series
13% Reduce
06
FD Series
through the HYUNDAI WIA Smart System. The user friendly software and equipment
monitoring of the Smart System maximizes productivity.
HW-MMS
HW
M
HW
-T
DC
S|
ng
ini
HW-TM | HW-MC
Hig
Convenien
| HW
er
ach
ce
Us
hP
Intelligent M
recisio
-WARMUP
HW-eDNC
User Friendly
n
HW-MCG
Hi
g
g
Pr
av
in
h
od S
uc
tivi rgy
ty Ene
HW
-T SS
OM -E
HW
Mold-related Software
(FANUC) (FANUC)
HW-AFC HW-MCS
HYUNDAI WIA HYUNDAI WIA
Adaptive Feed Control Machining Condition Selection
Software that controls the feed automatically to maintain a Software that automatically sets cutting and feeding
certain working load to extend tool life as well as parameters according to the machining types (speed,
productivity. degree, quality)
MACHINE TOOL
HYUNDAI WIA
Smart Factory HW-MMS (HYUNDAI WIA-Machine Monitoring System)
A brand new manufacturing machine by HYUNDAI WIA, HW-MMS is a unique software capable of monitoring the operation
status of manufacturing machines in factories, a smart solution to improve manufacturing conditions of customers.
FD Series
03 History and statistics of alarm occurrence (Cloud)
02 04 HW-MMS
04 History and statistics of work count (Cloud)
Remote
System 05 Remote diagnosis (Remote)
16
+
(FANUC) 17
HW-MCG HW-TDC
HYUNDAI WIA HYUNDAI WIA Thermal
Machine Guidance Displacement Compensation
Software that offers operation, maintenance, management Software that measures the changes in the external environment
monitoring and various user friendly features. as well as heat emission during processing to help reduce thermal
displacement.
(FANUC) (FANUC)
HW-WARMUP HW-ESS
HYUNDAI WIA HYUNDAI WIA
WARMing Up Energy Saving System
Warm-up software that measures main spindle halt and An environmental friendly software that reduces the
offers system warm-up time automatically. unnecessarily wasted standby power waiting for an
operation.
HW-TOM HW-TM
HYUNDAI WIA HYUNDAI WIA
Tool Offset Measurement Tool Monitoring
User friendly GUI software that indicates tool length, A tool monitoring software which analyzes the load of the spindle
diameter, and damage (H/W excluded) motor to determine and monitor possible damage of tools.
07
FD Series
SIEMENS Controller
Software for smart operating and machining
DIFFERENTIATED CAPABILITIES,
INTEGRATED ENGINEERING PERFECTLY INTERLINKED
SIEMENS 828D is a latest model CNC.
It is designed for horizontal/vertical all-purpose equipment.
SIEMENS
MACHINE TOOL
HYUNDAI WIA
processing software that monitors speed and accuracy.
FD Series
Speed
18
SIEMENS Technology SIEMENS Communication +
19
Shop Mill Variable
Communication Port
•Dialogue-type programming, simple and
convenient
•Effective specifications for small quantity RJ 45 Ethernet
batch production
USB 2.0
•Step-by-step operation possible without
knowledge of the DIN/ISO code
Compact Flash Card
3D Simulation
•3D confirmation of the completed Easy input/output of a program is possible as a USB
processing configuration of the NC memory card, a CF memory card and LAN can all be used.
program is possible.
•Offers standards for 2D simulation.
•Possible to confirm the simulation of the
NC grogram during processing.
ISO Code
Programming
Easy Extend
•Easy to install/uninstall an option
(Ex : barfeeder and chip conveyor, etc.)
If the ISO Dialect (G291) is ordered, JIS-based G-code
•Possible to install in one motion without
programs can be used. (Standard)
revision of individual perimeters.
•A spate list is unnecessary as option
items are indicated with letters.
08FD Series
User Convenience
Various Devices for User Convenience
Laser Type
Hydraulic Device
Touch Type
Optional
MACHINE TOOL
HYUNDAI WIA
Vertical Machining Center
Coolant Unit
FD Series
Std. Coolant (Nozzle) Standard
Bed Flushing Coolant Standard
Through Spindle Coolant
Option
(20/30 bar [290/435 psi])
Shower Coolant Option
Gun Coolant Option
Side Oil Hole Coolant Option 20
+
21
Chip Conveyor
Timely and effective disposal of chips will enhance productivity as well as the working environment.
•Hinge Belt Type : Highly efficient when disposing a lot of chips. Capable of handling stringy chips.
(Long Chip)
•Scraper Type : Convenient for shortly cut chips.. (Short Chip)
•Drum Filter Type : Advantageous in precision, as the chips do not flow in to the coolant nozzle.
(AL Chip)
Environment Device
Oil Skimmer
An oil skimmer can increase coolant and tool life by removing tramp oil
contaminants.
Mist Collector
Mist Collector reduces the amount of smoke and oil mist in the
air. This helps build a safe and comfortable working environment
and improve durability.
Specifications
Through Spindle Coolant* : Please check the filter types with sales representative.
Specifications are subject to change without notice for improvement.
For more information, contact Hillary Machinery at (877)902-3751 or www.hillaryinc.com
For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com
Specifications
MACHINE TOOL
(43/18.5kW [58/25HP]) Conversational Program (HW-DPRO) ○ ○
HYUNDAI WIA
10,000rpm Electric Device
BELT ○ -
(15/11kW [20/15HP) Call Light 1 Color : ■ ● ●
12,000rpm Call Light 2 Color : ■■ ○ ○
DIRECT ○ ○
(11/7.5kW [15/10HP) Call Light 3 Color : ■■■ ○ ○
8,000rpm ○ ○ Call Light & Buzzer 3 Color : ■■■B ● ●
Spindle Cooling System 10,000rpm ● - Work Light ○ ○
12,000rpm ● ● Electric Cabinet Light ● ●
ATC Remote MPG ○ ○
24 ● ● FANUC - -
ATC Extension 3 Axis MPG
30 ○ ○ SIEMENS ○ ○
FD Series
90° ☆ ☆ AVR (Auto Voltage Regulator) ☆
Table & Column 25kVA - -
Transformer
APC Rotary Turn ● ● 35kVA ○ ○
TAP TYPE Pallet ● ● Auto Power Off ○ ○
T-SLOT Pallet ○ - Back up Module for Black out ○ ○
NC Rotary Table ☆ ☆ Measuring Device
High Column - - TACO ○ ○
Air Zero
Coolant System SMC ○ ○
Std. Coolant (Nozzle) ● ● Work Measuring Device ○ ○
Bed Flushing Coolant ○ ○ TLM Touch ○ ○
20bar (290 psi) ○ ○ (Marposs/Renishaw/Blum) Laser ☆ ☆
30bar (435 psi), Tool Broken Detective Device ☆ ☆
20ℓ(5.3 gal)
○ ○
Linear Scale X/Y/Z Axis ○ ○
22
Through spindle coolant* 70bar (1,015 psi), Coolant Level Sensor
+
○ ○ ☆ ☆
15ℓ(4 gal) (Only for Chip Conveyor, Bladder Type) 23
70bar (1,015 psi), Enviornment
- -
30ℓ(8 gal) Air Conditioner ○ ○
Top Cover ○ ○ Dehumidifier ○ ○
Shower Coolant ☆ ☆ Oil Mist Collector ○ ○
Gun Coolant ○ ○ Oil Skimmer (Only for Chip Conveyor) ○ ○
Side Oil Hole Coolant ☆ ☆ MQL (Minimal Quantity Lubrication) ☆ ☆
Air Gun ○ ○ Fixture & Automation
Cutting Air Blow ○ ○ Std. ○ ○
Auto Door
Tool Measuring Air Blow (Only for TLM) ○ ○ High Speed ☆ ☆
Air Blow for Automation ☆ ☆ Auto Shutter (Only for Automatic System) - -
Thru MQL Device (Without MQL) ☆ ☆ Sub O/P ☆ ☆
Coolant Chiller ☆ ☆ Single ○ ○
NC Rotary TableI/F
Power Coolant System (For Automation) ☆ ☆ Channel ☆ ☆
Chip Disposal 1Axis ☆ ☆
Control of Additional Axis
300ℓ(79.3 gal) ● - 2Axis - -
Coolant Tank 460ℓ(121.5 gal) ○ - External M Code 4ea ○ ○
600ℓ(158.5 gal) - ● Automation Interface ☆ ☆
Cabin Screw Chip Conveyor - - 16 Contact ○ ○
I/O Extension (In & Out)
Rear (Rear) ○ - 32 Contact ○ ○
Chip Conveyor
Rear (Right) ○ ○ Hyd. Device
(Hinge/Scraper)
Right (Rear) - - 65bar (942.7 psi) /
- -
Special Chip Conveyor (Drum Filter) ☆ ☆ 35ℓ(9.2 gal)
Standard (180ℓ[47.5 gal]) ○ ○ 45bar (652.7 psi) /
Std. Hyd. Unit ● -
Swing (200ℓ[52.8 gal]) ○ ○ 60ℓ(15.8 gal)
Chip Wagon Large Swing (290ℓ[76.6 gal]) ○ ○ 45bar (652.7 psi) /
- ●
Large Size (330ℓ[87.2 gal]) ○ ○ 13ℓ(3.4 gal)
Customized ☆ ☆ 2x3 (6 Port) ○ ○
Center Hyd. Supply Device
Safety Device 2x5 (10 Port) ○ ○
Total Splash Guard ● ● Compact Center
2x3 (6 Port) ○ -
S/W Hyd. Supply Device
Machine guidance (HW-MCG) : FANUC/SIEMENS ☆/- ☆ 70bar (1,015 psi) ○ ○
Tool Monitoring (HW-TM) ○ ○ Fixture Hyd. Unit 100bar (1,450 psi) - -
DNC Software (HW-eDNC) ○ ○ Customized ☆ ☆
Spindle Heat Distortion Compensation (HW-TDC) ○ ○ ETC
Spindle Warm up Function (HW-WARMUP) : FANUC/SIEMENS ☆/- ☆ Tool Box ● ●
Energy Saving System (HW-ESS) : FANUC/SIEMENS ☆/- ☆ Customized Color Need for Munsel No. ☆ ☆
Machine Monitoring System (HW-MMS) ○ ○ CAD&CAM Software ☆ ☆
Through Spindle Coolant* : Please check the filter types with sales representative.
Specifications are subject to change without notice for improvement.
For more information, contact Hillary Machinery at (877)902-3751 or www.hillaryinc.com
For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com
Specifications
F410D
500 (19.7)
1080 (42.5)
410 (16.1)
Z-STROKE
570(22.4)
580 (22.8)
Y-STORKE
X-STROKE
2337 (88)
2130 (83.9)
420 (16.5)
650(25.6)
DOOR OPEN
1200 (47.2)
957 (37.7)
630 (24.8)
601.6 (23.7) 2210 (87)
500 (19.7)
1290 (50.8)
1080 (42.5)
410 (16.1)
Z-STROKE
580 (22.8)
Y-STORKE
2480 (97.6)
2130 (83.9)
420 (16.5)
1190 (46.9)
957 (37.7)
630 (24.8)
Specifications
F500D
MACHINE TOOL
HYUNDAI WIA
Center
Right Side
570(22.4)
600(23.6) Chip Conveyor
Vertical Machining
FD Series
795(31.3)
935(36.8)
24
+
25
Rear
Chip Conveyor
Chip Conveyor
935(36.8)
Specifications
F600D
Right Side
Chip Conveyor
800(31.5)
Right Side
Chip Conveyor
600(23.6)
600(23.6)
(7.9)
200
Specifications
F410D
MACHINE TOOL
HYUNDAI WIA
1
STD. MM TAP (M16 TAP) 17
OPT. INCH TAP (5/8"-11 UNC-2B)
55 340 (13.4) 30
(0.6)
(1)
25
15
(2.2) (1.2)
(3.9)
100
(3.9)
100
(3.9)
100
200 (7.8)
(3.9)
100
450 (17.7)
650 (25.6)
120°
(3.9)
100
Ø20
FD Series
(Ø0.8)
(3.9)
100
200 (7.8)
35 (1.4)
(0.04)
40 (1.6)
1
(3.9)
100
(3.9)
100
(3.9)
(0.6)
15
(1)
25
55 100
(2.2) (3.9)
100
(3.9)
100
(3.9)
145
(5.7)
145
(5.7)
100
(3.9)
100
(3.9)
100 55
(3.9) (2.2)
Tap Detail 55
(2.2)
60 340 (13.4) 100 100 340 (13.4) 60 (M16 Tap) 26 60
(2.4) (3.9) (3.9) (2.4) (2.4)
1000 (39.3)
+
27
(2.2)
(2)
(2)
50
55
50
128 (5)
55 1818H12 20 1818H12 Ø20
(0.6)
100
(3.9)
40 (1.6)
1 (0.04)
(3.9)
100
200(7.8)
(SELF CUTTING STROKE)
(3.9)
100
444 (17.5)
700 (27.5)
600 (23.6)
110(4.3) 110(4.3)
Tap Detail
(3.9)
100
550 (21.6)
(M16 Tap)
450 (17.7)
650 (25.6)
°
(3.9)
100
18
8) Center
(0.7)
Other
8-M6 TAP DP20
(0.3)
(2) (3.9)
50 100
7
200(7.8)
128 (5)
35 (1.4)
(0.04)
40 (1.6)
(2.2)
(0.8)
(2)
55
50
32 (1.3)
20
1
(3.9)
100
(0.5)
12
50 100 100 100 100 50 200 50 100 100 100 100 50 75 (3) 1
(0.6)
(
15
(2) (3.9) (3.9) (3.9) (3.9) (2) (7.8) (2) (3.9) (3.9) (3.9) (3.9) (2) 65
Tap Detail
etail 55 150 (5.9) 150 (5.9) 145 145
1200 (47.2)
150 (5.9) 150 (5.9) 55 30 (1.2) (2.6)
(2.2) (5.7) (5.7) (2.2) (M16 Tap)
Tap) 60 340 (13.4) 100 100 340 (13.4) 60
T-Slot Detail
(2.4) (3.9) (3.9) (2.4)
1000 (39.3)
(3.9)
128 (5)
100
118°
(2.2)
55
128 (5)
(1.9) (3.9)
(2)
50
50 100
Ø20
(Ø0.8)
R4.00008-M8 TAP DP20
40 (1.6)
23°
1 (0.04)
23°
45° 45°
0 (7.9)
.5) ±1.0
45
°
45
7.5)
°
5.7)
00
(SELF CUTTING STROKE)
(3.9
10
550 (21.6)
450 (17.7)
650 (25.6)
For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com
450 (17.7)
650 (25.6)
120°
(3.9)
100
Ø20
(Ø0.8)
Specifications
(3.9)
100
200 (7.8)
35 (1.4)
(0.04)
40 (1.6)
1
(3.9)
100
(3.9)
100
(3.9)
100 8-M6 TAP DP20
(0.6)
15
(1)
25
Table Dimensions
55 100 100 100 145 145 100 100 100 55
Tap Detail unit : mm(in)
55 150 (5.9
(2.2) (3.9) (3.9) (3.9) (5.7) (5.7) (3.9) (3.9) (3.9) (2.2) (2.2)
60 340 (13.4) 100 100 340 (13.4) 60 (M16 Tap) 60
(2.4) (3.9) (3.9) (2.4) (2.4)
F500D 1000 (39.3)
118°
(2.2)
(2)
(2)
50
55
50
128 (5)
18 (SELF CUTT'G AFTER) Ø20
(Ø0.8)
(3.9)
17 (SELF CUTT'G BEFORE)
100
55 1818H12 20 1818H12
40 (1.6)
(0.6)
1 (0.04)
(2.2) (0.8)
15
(3.9)
100
(3.9)
100
200(7.8)
(3.9)
100
444 (17.5)
700 (27.5)
600 (23.6)
Tap Detail
(SELF CUTTING STROKE)
(3.9)
100
(M16 Tap)
110(4.3) 110(4.3)
550 (21.6)
(3.9)
100
450 (17.7)
650 (25.6)
18
(0.7)
18.000017
(0.3)
(2) (3.9)
50 100
128 (5)
Center
Other
(2.2)
8-M6 TAP DP20
(2)
55
50
200(7.8)
35 (1.4)
(0.04)
40 (1.6)
(0.8)
32 (1.3)
20
50 100 100 100 100 50 200 50 100 100 100 100 50 75 (3) 100X3=3
(3.9)
100
(2) (3.9) (3.9) (3.9) (3.9) (2) (7.8) (2) (3.9) (3.9) (3.9) (3.9) (2) 65 (3.9X3=1
Tap Detail
(0.5)
12
55 150 (5.9) 150 (5.9) 145 145 150 (5.9) 150 (5.9) 55 30 (1.2)
(2.2) (5.7) (5.7) (2.2)
60 340 (13.4) 100 100 340 (13.4) 60
(2.4) (3.9) (3.9) (2.4)
T-Slot Detail
1000 (39.3)
(3.9)
128 (5)
100
(2)
50
(2.2)
55
128 (5)
(1.9) (3.9)
50 100
8)
R4.00008-M8 TAP DP20
23°
1 (0.04)
23°
400
0
45
°
45
1
45°
27°
444 (17.5)
(0.04) S
25
etail
)
(2)
50
Tap) 7.9
+0.027
200 (7.9)
18H8
0(
0
26 (1)
0
ø2 1
(3.9)
100
.D (0.04)
P.C
45°
8-Ø6.7DR. DP21
16 (0.6)
M8 TAP DP15
+2.0
0
(3.9) (1.9)
0.5
18.000017
65
100 50
25 25
C0.6
(0.3)
+2.0
75 100 ±0.2 100 ±0.2 100 ±0.2 125 (2.5) 27 0
(0.4)
10.5
32 (1.3)
7
128 (5)
(1) (1)
(2.9) (3.9) (3.9) (3.9) (4.9) (1.1)
(2.2)
(2.2)
70 125 125
500 (19.7) 200 (7.8) 500 (19.7) T-Slot Detail
55
55
C0.6
+2.0
30 0
(0.5)
75 (3) 100X3=300 125 (4.9) 200 (7.9) 125 (4.9) 100X3=300 75 (3) (2.4)
(3.9X3=11.7) (3.9X3=11.7) (1.2)
65 1070 (42) 65
etail (2.6) (2.6)
Tap) T-Slot Detail
(4.3)
110
(4.9)
125
Ø20
5
200(1(
444 (17.5)
700 (27.5)
45° 45°
200 (7.9)
45
°
45
p Detail
°
For more information, contact
)
Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com
16 Tap) 7.9
+0.027
200 (7.9)
18H8
444 (17.5)
700 (27.5)
0(
0
0
ø2 1
Detail P.C
.D (0.04)
45°
18
6(0.7)
Tap) .9) +0.027
200 (7.9)
18H8
(7 0
00
Specifications
(3.9) (1.9)
18.000017
2
(3.9) (1.9)100 50
1
Dø
(0.3)
32 (1.3)
7
(0.04)
P.C
128 (5)
45°
18
0.7)
(2.2)
(2.2)
55
55
18.000017
100 50
(0.3)
32 (1.3)
7
128 (5)
0.5
12+2.00
C0.6
+2.0
30 0
(0.5)
100X3=300
75 (3) 125 (4.9) 200 (7.9) 125 (4.9) 100X3=300 75 (3)
(2.2)
(2.2)
55
55
(3.9X3=11.7) (3.9X3=11.7) (1.2)
p Detail Table Dimensions
65 1070 (42) 65
unit : mm(in)
(2.6) 100 (3.9) 25 (1) 25 (1) 100 (3.9) (2.6)
T-Slot Detail
0.5
12+2.00
16 Tap)
C0.6
+2.0
30
(0.5)
75 (3) 100X3=300 125 (4.9) 200 (7.9) 125 (4.9) 100X3=300 75 (3) 0
MACHINE TOOL
HYUNDAI WIA
(4.3)
110
(4.9)
125
(4.3)
110
120°
(4.9)
125
(4.9)
125
Ø20
(Ø0.8)
120°
680 (26.7)
900 (35.4)
+0.027
16H8 0
(Ø0.8)
35 (1.4)
(0.04)
40 (1.6)
1
(4.9)
1
125
(4.9)
45°
125
680 (26.7)
900 (35.4)
0.04) S +0.027
16H8
25 0
35 (1.4)
(0.04)
40 (1.6)
FD Series
1
(4.9)
125
(4.9)
125
45°
04)
25
S Tap Detail
(M16 Tap)
(4.9)
125
(4.9)
125
16 (0.6)
Tap Detail
0.5
(4.3)
110
C0.6
+2.0
(M16 Tap)
(3)
75
27 0
(0.4)
(4.9)
125
(1.1)
16 (0.6) 70 125 125 125 125 80 80 125 125 125 125 70
-Slot Detail
0.5
(4.3)
110
C0.6
+2.0 (2.7) (4.9) (4.9) (4.9) (4.9) (3.1) (3.1) (4.9) (4.9) (4.9) (4.9) (2.7)
(3)
75
27 0
(1.1) 60 590 (23.2) 100 100 590 (23.2) 60
(2.4) 125
70 125 125 125 80 (3.9) (3.9) 80 125 125 125 125 70(2.4)
Slot Detail (2.7) (4.9) (4.9) (4.9) (4.9) (3.1)
28
1500 (59) (3.1) (4.9) (4.9) (4.9) (4.9) (2.7)
+
60 590 (23.2) 100 100 590 (23.2) 60
(2.4) (3.9) (3.9) (2.4) 29
1500 (59)
(2.2)
(1) (2.7)
55
(1) (2.7) 50 70
(4.3)
110
(2.2)
55
50 70
(4.3)
110
+0.027
18H8 0
330 (13)
45°
(SELF CUTTING STROKE)
(0.04)
+0.027
18H8 0
P.C
330 (13)
1 45°
790 (31.1)
680 (26.7)
.D
32 (1.3)
(SELF CUTTING STROKE)
(0.04)
900 (35.4)
20
0(
7.9
P.C
790 (31.1)
680 (26.7)
.D
32 (1.3)
900 (35.4)
330 (13)
20
12+2.00
+2.0
0.5
30 0
(0.5)
0 (7
C0.6
(1.2)
.9)
T-Slot Detail
330 (13)
12+2.00
+2.0
0.5
30
(0.5)
17 0
C0.6
(0.7) (1.2)
(2.7) (1)
(2.7) (1) 70 50
T-Slot Detail
(4.3)
110
(2.2)
17
55
(0.7)
100 25 25 100
70 50
Specifications
BT40
10 22.6
(0.39) (0.88)
M16
75°
(0.63)
16.1
(Ø1.75)
Ø63 (Ø2.48)
Ø44.45
Ø63.5 (2.5)
F410D
(Ø0.75)
(Ø0.55)
Ø19
Ø14
7/24
(Ø0.157)
Ø4
60° 2 (0.06)
(BT40)
16.6
(0.65)
27 65.4 (2.57) 29
(1.06) (1.14)
10 22.6
(0.39) (0.89)
M16
(Ø0.39)
(0.63)
Ø10
16.1
45°
(Ø1.75)
Ø63 (Ø2.48)
Ø44.45
Ø63.5 (2.5)
F500D
(Ø0.59)
Ø15
6 29(1.14)
7/24 (0.23)
2 (0.06) 35 (1.37)
(Ø0.12)
P5
Ø3
60°
16.6 (0.65)
27 65.4 (2.57)
(1.06)
(Ø0.157)
(Ø0.19)
Ø4
Ø5
3
11.5 (0.45) (0.12)
10 22.6
(0.39) (0.89)
M16
45°
(0.63)
16.1
(Ø1.75)
Ø63 (Ø2.48)
Ø44.45
Ø63.5 (2.5)
F600D
(Ø0.59)
(Ø0.39)
Ø15
Ø10
7/24
(Ø0.157)
2 (0.06)
Ø4
60°
16.6 (0.65) 6 29(1.14)
(0.23)
27 65.4 (2.57) 35 (1.37)
(1.06)
Specifications
CAT40 60°
2.6
88)
MACHINE TOOL
HYUNDAI WIA
5/8″-11
75°
(0.63)
16.1
Ø44.5 (1.75)
Ø63.5 (2.5)
F410D
16.383
(0.645)
Ø19 (Ø0.784)
(Ø0.551)
Ø14
FD Series
Ø2.7″
.6 60°
89)
5/8″-11
(0.63)
16.1
Ø44.5 (1.75)
Ø63.5 (2.5)
30
16.383
(0.645)
F500D +
31
15 (0.59)
2. R0.4
Ø4 (0.157)
Ø5 (0.097)
Ø3 (0.118)
(Ø0.19)
Ø5
3
(0.12)
3 (0.118)
60° 11.5 (0.453)
2.6
89)
5/8″-11
(0.63)
16.1
Ø44.5 (1.75)
Ø63.5 (2.5)
16.383
(0.645)
F600D
15 (0.59)
Specifications
Specifications [ ] : Option
Feed Distance from Column to SP. center mm(in) 495 (19.5″) 500 (19.7″)
*) Using 50Hz voltage instead of 60Hz may lower the output of motors. (excluding servo motors and inverter motors)
Specifications are subject to change without notice for improvement.
For more information, contact Hillary Machinery at (877)902-3751 or www.hillaryinc.com
For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com
Specifications
Specifications [ ] : Option
ITEM F600D
MACHINE TOOL
kg(lb)
HYUNDAI WIA
Table Table Change Time sec 8.5
FD Series
Distance from Table Surface to SP mm(in) 200~800 (7.9″~31.5″)
*) Using 50Hz voltage instead of 60Hz may lower the output of motors. (excluding servo motors and inverter motors)
Specifications are subject to change without notice for improvement.
For more information, contact Hillary Machinery at (877)902-3751 or www.hillaryinc.com
For more information, contact Hillary Machinery at (877)902-3751 or https://www.hillaryinc.com
Controller
Controller
MACHINE TOOL
Feed Function Absolute/incremental Command G90 - G91
HYUNDAI WIA
Feedrate Override 0 - 120% Scaling, ROT
Rapid Traverse Override F0, 5, 25/50, 100% Inch / Metric Conversion
Acceleration with jerk limitation Conversational Cycle Program
Programmable acceleration Block Search
Follow-up mode Variable Program (Macro)
Measuring system 1 and 2, selectable Read / Write System Variable
Separate path feed for corners and chamfers BackGround Editing
Travel to fixed stop Miscellaneous Functions M - Code
Spindle Functions Lable Skip
Spindle Override 50% - 120% Program Stop / End M00, M01, M02, M30
FD Series
Circle via center point and end point Protection Function
Circle via interpolation point Emergency Stop
Helical interpolation Over Travel Soft Limit
Universal interpolator NURBS Contour Monitoring
(non-uniform rational B splines) Program Protection
Advanced Surface High Speed, High Rigidity Function Automation Support Fun.
Compressor for 3-axis machining Actual Speed Display(Monitor)
Tool Function Tool Life Management (Time, Parts)
Tool Radius Comp. Work Count Function (Internal)
Zero Offset (G54, G55, G56, G57 ,G58, G59) 100 EA Language Function
Programmable Zero Offset (6EA)
3D Tool Radius Compensation Chinese Traditional, Czech, Danish,
34
Tool management Two Language switchable Dutch, Finnish, Hungarian, Japanese,
+
Display Korean, Polish, Russian, Swedish,
CRT / MDI 10.4˝ Color LCD Portuguese, Turkish
35
Screen saver Data Transfer
Manual Operation RS 232C I/F / Ethernet
Manual Handle/Jog Feed Ethernet
Reposition USB Memory Stick & CF Card
Reference Approach Ref 1, 2 Approach
Spindle Control Start, Stop, Rev, Jog, Ort. Option
Auto Operation DRF offset
Single Block Load and save of MDI
Feed Hold Teach-in
Optional Block Skip Number of levels for skip blocks 8
Machine Lock Simulation in 3D display
Dry Run Shop Mill Conversational Program
Simulation 2D TRACYL
Diagnosis Function TRANSMIT
Alarm display
Spindle Load Meter/RPM Meter (monitor)
PLC status/LAD display
Controller
Controlled axis / Display / Accuracy Compensation Auxiliary function / Spindle speed function
Control axes 3 axes (X, Y, Z) 4 axes (X, Y, Z, B) Auxiliary function M & 4 digit
Simultaneously controlled axes 3 axes [Max. 4 axes] Level-up M Code Multi / Bypass M code
X, Y, Z axes : 0.001 mm (0.0001 inch) Spindle speed command S & 5 digit , Binary output
Least setting Unit
B axes : 1 deg [0.001] deg Spindle override 0% ~ 150% (10% Unit)
X, Y, Z axes : 0.001 mm (0.0001 inch) Spindle orientation M19
Least input increment
B axes : 1 deg [0.001] deg FSSB high speed rigid tapping
Inch / Metric conversion G20 / G21 Tool function / Tool compensation
High response vector control Tool function Max. T 8 digit
Interlock All axes / Each axis Tool life management 256 pairs ☆
Machine lock All axes Tool offset pairs 64 pairs
± 0 ~ 9999 pulses Tool nose radius compensation G40, G41, G42
Backlash compensation
(Rapid traverse / Cutting feed) Tool nose length compensation G43, G44, G49
Position switch Tool offset memory C Tool length, diameter, abrasion(length, diameter)
LCD / MDI 10.4 inch color LCD Tool length measurement Z axes Input C
Feedback Absolute motor feedback Editing function
Stored stroke check 1 Over travel Part program storage size 640m (256KB)
Stored pitch error compensation No. of registerable programs 500 ea
Operation Program protect
Automatic operation (Memory) Background editing
MDI operation Extended part program editing Copy, move and change of NC program
DNC operation Needed DNC software / CF card Memory card program edit
Program restart Data input / output & Interface
Wrong operation prevention RS 232C serial port, CF card, USB memory
I/O interface
Dry run, Program check Embedded Ethernet interface
Program check function
Z axes Machine lock, Stroek check before move Screen hard copy
Single block External message
Search function Program Number / Sequence Number External key input
Interpolation functions External workpiece number search
Nano interpolation Automatic data backup
Positioning G00 Setting, display and diagnosis
Linear interpolation G01 Self-diagnosis function
Cylinderical interpolation G02, G03 History display Alarm & Operator message & Operation
Exact stop mode Single : G09, Continuous : G61 Run hour / Parts count display
Dwell G04, 0 ~ 9999.9999 sec Maintenance information
Skip G31 Actual cutting feedrate display
1st reference : G28 Display of spindle speed / T code
Reference position return 2nd reference : G27 Graphic display
Ref. position check : G30 Operating monitor screen Spindle / Servo load etc.
Thread synchronous cutting G33 Power consumption monitoring Spindle & Servo
Helical interpolation Circular + Linear interpolation 2 axes(max.) Spindle / Servo setting screen
Feed function / Acc. & Dec. control Multi language display Support 20 languages
Rapid traverse Display language switching Selection of 5 optional Languages
Jog : 0~5,000mm/min (197 ipm) LCD Screen Saver Screen saver
Manual feed
Manual handle : x1, x10, x100 pulses Processing select Speed/ridigity setting
Reference position return
Cutting Feed command Direct input F code Option
Feedrate override 0 ~ 200% (10% Unit) Additional optional block skip 9 ea ☆
Rapid traverse override F0% (F1%), F25%, F50%, F100% Fast ethernet Needed option board
Override cancel Data server Needed option board
Feed per minute G94 Protection of data at 8 levels
Feed per revolution G95 Sub Spindle control
40 Block Polar coordinate command G15, G16
Look-ahead block
200 Block (Mold) Polar coordinate interpolation G12.1, G13.1
Program input Cylinderical interpolation G07.1
Tape Code EIA / ISO One-way positioning G60
Optional block skip 1 ea Stored stroke check 2, 3
Absolute / Incremental program G90 / G91 Inverse-time feed G93
Program stop / end M00, M01 / M02, M30 Scaling G50, G51
Maximum command unit ± 999,999.999 mm (± 99,999.9999 inch) Manual guide i Conversational auto program
Plane selection X-Y : G17 / Z-X : G18 / Y-Z : G19 Handle interrupt
Workpiece coordinate system G52, G53, 6 pairs (G54 ~ G59) Manual handle feed 2/3 units
Manual absolute Fixed ON #100~#199, #500~#999
Additional custom macro variables
Programmable data input G10 #100~#199, #500~#999, #98000~#98499
Sub program call 10 folds nested Rigid tap Return
Custom macro #100 ~ #149, #500 ~ #549 Tool management function
G code system A Tool offset number Max. 400 pair
Programmable mirror image G51.1, G50.1 Program storage capacity 512KB ~ 2MB
G code preventing buffering G4.1 Program registration number Max. 1000 ea
Including Chamfering / Corner R Additional work coordinate 48 pair (G54.1 P1 ~ P48)
Canned cycle G73, G74, G76, G80 ~ G89 200 block
AICC Ⅱ
Coordinate rotation G68, G69 400 block ☆
Controller
MACHINE TOOL
Least input increment X, Y, Z axis : 0.001mm (0.0001″) Optional chamfering/corner R G73, G74, G76, G80 ~ G89
HYUNDAI WIA
Least command increment X, Y, Z axis : 0.001mm (0.0001″) G20 / G21 Skip function
Inch / Metric conversion G20 / G21 Automatic coordinate system setting G31
Interlock Each axis / All axis Coordinate system rotation
Machine lock All axis Programmable mirror image
Emergency stop Sub / Spindle functions
Stored stroke check 1 Miscellaneous function M3 digit
Mirror Image Miscellaneous function lock
Follow-up Spindle speed command S5 digits, binary output
Servo off Spindle speed override 50% ~ 120% (10% Unit)
+/- 0~9999 pulse Spindle orientation
FD Series
Automatic operation (memory) Tool offset pairs 64 Pair
MDI operation Tool life management
Research Function Sequence, Program Data input / Output & Editing functions
Program restart Reader/Puncher interface RS232C
Dry run Memory card input/output
Single Block Embeded Ethernet 100 Mbps
Buffer register Part program storage length 320 m (128 Kbyte)
Memory Card DNC operation Registered programs 125 ea
Feed functions Memory lock
Manual jog feed Rapid, Jog, handle Back ground editing
Manual handle feed-rate x1, x10, x100 Extended part program editing Copy, move, change of NC program
Feed command F code feedrate direct command Extenal message
36
Feedrate override 0~200% (10% Unit) Setting, Display, Diagnosis
+
Jog feed 0~5,000 mm/min (197 ipm) Self-diagnosis function
Rapid traverse override F0, F25%, F50%, F100% Alarm history display Alarm & Message
37
Override cancel Help function
Rapid traverse bell-shaped Run hour/Parts count display
acce/deceleration Actual cutting feedrate display
Program input & Interpolation functions Graphic display
Label Skip Spindle/Servo setting screen
Positioning/Linear/Circular Operation monitor screen Loadmeter Light
Interpolation function
(G00/G01/G02/G03) Selection of 5 optional language
Exact stop mode/Exact stop G61 / G09 LCD Screen Save Screen saver
Control in/out Auto Data Backup
Dwell Manual Guide i Conversational Program
Helical interpolation G04, 0~9999.9999sec
Threading/synchronous feed Option
Manual reference point return Sub Axis Control
Reference point return Additional work coordinate system 48 Pair / 300 Pair
Reference point return check G28 Additional custom micro change #100~#199, #500~#999
2nd, Reference point return G27 Work coordinate Command
Program stop/end G30 Work coordinate Interpolation
Tape code M00, M01 / M02, M30 Cylinderical interpolation
Optional block skip EIA / ISO (Automatic recognition) Single direction positioning G60
Max. programmable dimensions 1 ea FAST ethernet 100 Mbps
Program number +/- 9999.9999” (+/- 8digit) Data server 1GB
Sequence number O4 / N8 digit AI Contour Control II(AICC II)
Absolute/incremental command Additional optional blockskip 9 ea (Application can be limited)
Decimal point input G90 / G91 Handle interupt
Plane selection G17, G18, G19 Manual Handle Feed 3 unit
Work coordinate preset G52~G59 Program storage length 640m (256Kbyte) ~ 5120m (2Mbyte)
Manual absolute “On” fixed Dynamic graphic display
Programmable data input G10 Protection of data at 8 levels
Sub program call 10 folds nested Tool monitoring function HWTM (Embeded FANUC Type)
Custom macro
Global Network
+\XQGDL:,$
0DFKLQH7RROV$PHULFD
+\XQGDL:,$
0DFKLQH7RROV(XURSH
5DXQKHLP6HUYLFH&HQWHU
5DQXKHLP5 '&HQWHU
%(,-,1*%5$1&+2)),&( +($'48$57(5
:8+$12)),&(
4,1*'$2%5$1&+2)),&(
&+(1*'8%5$1&+2)),&(
&+21*4,1*2)),&(
-,$1*68
+<81'$,:,$
,1',$%5$1&+2)),&(
+\XQGDL:,$
0DFKLQH7RROV&KLQD
6+$1*+$,%5$1&+2)),&(
*8$1*=+28%5$1&+2)),&(
Global Network
Headquarter
Changwon Technical Center / R&D Center / Factory
153, Jeongdong-ro, Seongsan-gu, Changwon-si,
MACHINE TOOL
HYUNDAI WIA
Gyeongsangnam-do, Korea (Zip Code : 51533)
TEL : +82 55 280 9114 FAX : +82 55 282 9680
FD Series
Hyundai WIA Jiangsu HYUNDAI WIA Chengdu Branch Office
Machine Tools America Company No.6 Fenghuang Road, NO.508 Room, B Block, AFC Plaza, NO.88
265, Spring Lake Drive, Itasca, IL, 60143 Fenghuang Town, Zhangjjagang City, Jiaozi Road, High-tech Zone, Chengdu,
TEL : +1 630 625 5600 Jiangsu province, China China
FAX : +1 630 625 4733 TEL : +86 512 5672 6808 TEL : +86 028 8665 2985
FAX : +86 512 5671 6960 FAX : +86 028 8665 2985 38
+
39
Hyundai WIA Hyundai WIA Machine Tools China Qingdao Branch Office
Machine Tools Europe Shanghai Branch Office Room 1207, Cai Fu Building, 182-6 Haier
Kaiserleipromenade 5, 63067 Offenbach, 1-3F, Bldg6, No.1535 Hongmei Road, Middle Road, Qingdao, China
Germany Xuhui District, Shanghai, China TEL : +86 532 8667 9334
TEL : +49 69271 472 701 TEL : +86 021 6427 9885 FAX : +86 532 8667 9338
FAX : +49 69271 472 719 FAX : +86 021 6427 9890
http://machine.hyundai-wia.com