You are on page 1of 5

HSE-ICG/PCJ-3075-CA/JSA.

014
Date:

PetroChina International Jabung Ltd. Job Safety Analysis

Job: Excavation For Location Pipe Exsisting Title of person Analyzed by:
Sabar Bridge To Sabar #2 Pad who does the job: Supervisor, HSE, Operator, Surveyor,
Helper,

Work Crew Leader


Department : Section: Reviewed by: Approved by:
PT. IndoCipta Gemilang Construction Work Crew Supv: Area Supv: F/S Supv:

Construction Manager

Personal protective equipment (PPE) : Write down correct specifications of personal protective

Put on PPE required for a safe job. equipment required (Consult HSE Dept) :
1. Safety hat / helmet √ 6. Face shield √ 11. SCBA 16. Safety shoes / boots √
2. Safety glasses √ 7. Ear plugs / muffs 12. Gloves – Ordinary √ 17. Rubber boots
3. Goggles – ordinary 8. Dust mask 13. Gloves - 18. Prot. Clothing /
Chemicals Apron
4. Goggles – tinted 9. Air-purifying respirator 14. Gloves – Thermal 19. Body harnesses, L-
lenses line
5. Goggles – Chemicals 10. Air-line respirator 15. Rubber gloves 20. Life vest
Sequence of Basic Job Steps Potential Hazards Protective Equipment Safe Procedures
1) Preparation  Miscommunication  Use Standard PPE (Safety Helm  Prepare Permit To Work
 Misunderstanding ,safety glasses ,coverall, safety  Pre-job safety meeting.
 Failure shoes)  Discuss JSA to workers before job
 Discuss emergency response
preparedness to workers if
emergency situation happen
 Good communication with
personnel
 Everyone has permission to stop
the job when any unsafe condition.
1) Persiapan  Miskomunikasi  Gunakan PPE standard  Persiapan Izin Kerja
 Kesalahpahaman (Helm,Kacamata, coverall,  Melakukan pembicaraan
 Terjadi kegagalan sepatu) keselamatan sebelum bekerja
 Membicarakan JSA kepada pekerja
sebelum bekerja
 Membicarakan tanggap darurat ke
pekerja jika terjadi situasi darurat
 Komunikasi yang baik antar
personil
 Setiap orang mendapatkan hak
untuk menghentikan pekerjaan
jika dapat membahayakan pekerja
di segala kondisi.
2) Preparation of Tools, and Equipment  Pinch point  Use Standard PPE (Safety  Ensure all the equipment has been
and Safety Sign  Miscommunication Helm,safety glasses,coverall, inspected and check by PCI and fit
 Misunderstanding safety shoes) for use
 Failure  Be careful when pick up tools
 Watch body position
 Everyone must pay attention at all
times

 Stay focused
 Ensure tools ready to use
 Ensure all document for already
accepted and reviewed by PCI
 Proper Safety Sign and barricade
will be install prior execution
 During Mobilization to the work
location, ensure that proper access
and safe for heavy equipment
layout and position
 The equipment layout do not
interfere with another traffic or
transportation
 Check list all equipment and tools
will be use before work activity.
2) Mempersiapkan Izin Kerja dan alat-alat  Terjepit  Gunakan PPE standard  Pastikan semua peralatan yang
 Miskomunikasi (Helm,Kacamata, coverall, dipergunakan untuk pekerjaan
 Kesalahpahaman sepatu) sudah lulus inspeksi oleh PCI dan
 Terjadi kegagalan baik untuk digunakan.
 Berhati-hati ketika mengambil
peralatan
 Memperhatikan posisi tubuh
 Setiap orang harus
memperhatikan pekerjaannya dan
lingkungannya setiap waktu
 Tetap focus
 Memastikan semua peralatan siap
untuk digunakan
 Memastikan semua dokumen telah
disetujui dan ditinjau kembali oleh
pihak PCI
 Tanda Tanda Keselamatan dan
barricade terpasang sebelum
aktivitas dimulai.
 Pastikan operator & equipment
telah tersertifikasi oleh disnaker
 Ketika mobilisasi alat berat ke
lokasi dipastikan lokasi
penempatan alat berat yang aman
dan tidak menganggu aktivitas lalu
lintas transportasi
 Periksa semua peralalatan dan
alat-alat yang akan digunakan
selama pekerjaan.
3) Penggalian  Excavator terperosok  Gunakan PPE standard  Pastikan excavator berada tidak di
(Helm,Kacamata, coverall, posisi pinggir/tepi tumpukan
 Terkena cangkul dari excavator
sepatu) tanah/galian.
pada lokasi pipa yang sudah ada.
 Patikan posisi excavator stabil
 Terjatuh kedalam galian  Memastikan pekerja jauh dari
 Tertabrak cangkul ketika radius cangkul/swing dari
mengayun, cidera personil excavator
 Tanah longsor  Pastikan pandangan dari operator
tidak tertutup
 Bekerja dengan penuh konsentrasi
 Pastikan excavator beroperasi di
tanah landasan yang keras/padat
 Pastikan area excavator aman dari
pergerakan.
 Sediakan barricade dan rambu
rambu keselamatan .
 Semua certificate peralatan dan
operator harus disediakan.
 Pekerja yang tidak terlibat
diharapkan tidak berada dilokasi
penggalian.
 Pemeriksaan checklist harian
excavator harus dilakukan dan
peralatan aman untuk digunakan.
 Pengecekan kondisi tanah yang
berhubungan dengan jalur proses,
listrik dan instrument dibawah
tanah harus dilakukan.
 Tandai jalur proses dan listrik yang
live didalam tanah dan gunakan
metode manual untuk penggalian.
 Pastikan pekerja yang bekerja
sudah diotorisasi dan cakap
melakukan pekerjaan penggalian
tanah.
 Gunakan stik/tongkat pengecek
pipa tersedia di lokasi.
 Pasang rambu penggalian
 Sediakan tim pengatur lalu lintas
3) Excavation  The excavator sink  Use Standard PPE (Safety  Make sure the excavator is not in
Helm,safety glasses,coverall, the position of the edge / edge of
 Affected hoes from excavators at
safety shoes) the heap / excavation.
existing pipe locations.
 Make sure the position of the
 Fall into excavation excavator is stable
 Was hit by a hoe when swinging,  Ensure workers are far from the
injured personnel hoe / swing radius of the
 Landslide excavator
 Ensure that the views of the
operator are not closed
 Work with full concentration
 Make sure the excavator operates
on hard / solid anvil
 Make sure the excavator area is
safe from movement.
 Provide barricades and safety
signs.
 All equipment and operator
certificates must be provided.
 Workers who are not involved are
not expected to be at the
excavation site.
 A daily checklist of excavators
must be carried out and
equipment safe to use.
 Checking the condition of the soil
associated with the process line,
electricity and underground
instruments must be carried out.
 Mark live electricity and process
lines in the ground and use
manual methods for excavation.
 Ensure that workers who work are
authorized and capable of carrying
out earthwork.
 •se pipe check sticks / sticks
available on site.
 Install excavation signs
 Provide a traffic control team
6) Housekeeping  Bad housekeeping  Use Standard PPE (Safety  Ensure housekeeping implemented
Helm,safety glasses,coverall, before and after working hours.
safety shoes)  All the hazardous waste stored on
location
 Provide trash bin for organic waste
and anorganic waste at location
6) Kebersihan  Housekeeping yang buruk  Gunakan PPE standard  Pastikan housekeeping dilakukan
(Helm,Kacamata, coverall, sebelum dan sesudah jam kerja
sepatu)  Semua limbah B3 dari pengelasan
dikumpulkan dalam tempat
penyimpanan limbah B3.
 Sediakan tempat sampah untuk
sampah organic dan unorganik
Note : - Stop jobs, if found irregularities or changed from the JSA to further discuse with all departments involved.
- Do manual excavation near the existing pipeline.
- Good communication between operator and signalman, ensure the operator follow instruction/sign from signalman.
Catatan : - Stop pekerjaan, jika didapati penyimpangan atau perubahan dari JSA untuk di diskusikan lebih lanjut dengan semua departemen yang terlibat.
- Lakukan penggalian manual di dekat jalur pipa existing
- Komunikasi yang baik antara operator excavator dengan signalmen, yankinkan operator mengikuti instruksi

You might also like