Professional Documents
Culture Documents
Which of following the bridge is used for the measurement of meadium resistance
which of following the bridge is used for the measurement of very low resistance
Loss of charge method used for the measurement of __________ range of resistances.
For the measurement of insulation reistance of machines and cables, the following method is used
wheastone bridge can not be used for precision measurements because errors are intoduced into on account of
The inductnce of high quality factor inductor can be measured by a
The AC bridge used for measurement of dielectric loss of capacitor is
In Maxwell's inducatnce-capacitance bridge a resistance is in _________ with standard capacitor and in Hay's bridge a resistan
________ with a standard capacitor.
Head phones are widely used as detectors in AC bridges for the _____ range of frequencies is more sensitive.
For measurment unknown quantities at low frequencies _______ may act as the source of supply used in AC bridges.
Which of the following AC bridge is more useful for the measurement of inductance at power and audio frequencies.
Frequency can be measured by using
Maxwell's inductance-capacitance bridge is used for measurement of inductance of
The bridge network employed for the measurement of mutual inductance is _____________
The four arms of bridge network has Zab =Zbc = 100 L-30 Ω ; Zcd = 50 L-60 Ω and an unknown impedance is connect between
rms .Then unknown impedance is Zda is _________
The Wien’s bridges is suitable for the measurement of frequency of the range of
The commonly used detectors in ac bridges is/are
The Q meter works on the principle of
In a Wheatstone bridge, if P = 10 ± 1%, Q = 100 ± 1%, S= 20 ± 1% and ' R 'is unknown then the unknown resistance will be
A wheatstone bridge has ratio arms of 1000 Ω and 100 Ω resistance , the standard resistance arm consists of 4 decade resistan
1000,100,10,1 Ω steps. The maximum and minimum value of unknown resistance that can be determined with this setup are:
Electro-dynamometer wattmeter is not suitable for low power factor power measurement because of
For the measurement of energy and power it is essential to know
Measurement of power in circuits having low power factor is not done by using ordinary electrodynamometer wattmeter, bec