Professional Documents
Culture Documents
AB-28 2016-03
PARTIAL A#
Manufactured By:
Manufactured For:
Ultimate Owner:
Location of Installation:
Manufacturer's Serial No. Construction Drawing No. CODE: ASME B31.3 Year Built
Edition
CONSTRUCTION
Design
Design Minimum Corrosion
Coil ID/Purpose Design Pressure Temp Temp Allowance Registered Drawing No. CRN
a
b
c
d
e
COIL
End Closures
Tubes Return Bend Flanges Openings
Mat'l Spec. Diameter Thickness Mat'l Spec. Thickness Mat'l Spec. Rating Mat'l Spec. Size/Type Rating
a
b
c
d
e
HEADERS/MANIFOLDS
Shell Ends Openings
Purpose Size Mat'l Spec. Thickness Mat'l Spec. Thickness No Mat'l Spec Size/Type Rating
f
g
IMPACT TESTING:
REMARKS:
CERTIFICATE OF COMPLIANCE
We certify that the statements in this report are correct and that all details of design, material, construction, and workmanship of this coil bundle are in accordance
with the above Provincial Registered Design.
I, the undersigned, a duly authorized boiler and pressure vessel inspector employed by Alberta Boilers Safety Association (ABSA of Alberta have inspected the
above Heater Coils and state that, to the best of my knowledge and belief, the constructed is in accordance with the Alberta Safety Codes Act and Regulations. By
signing this certificate, neither the inspector nor his or her employer makes any warranty, expressed or implied, concerning the vessel described in this
manufacturer’s data report. Furthermore, neither the inspector nor his or her employer shall be liable in any manner for any personal injury or property damage or a
loss of any kind arising from or connected with this inspection.
Date Signed