Professional Documents
Culture Documents
Assignment (1)
Problem (1):
Find the forces in all members for the shown trusses in Figure 1, using the two methods
Newton Raphson and hyperbolic equation techniques, assuming that:
P = −149.4417 Δ3 + 347.72Δ
Where, P and Δ is the axial load, and axial deformation in the member respectively.
11 t 24 t 20 t 10 t
8t 6t 3t
3m
2m
2m 4m
Problem (2):
Draw BMD for the shown frame in Figure 2 supported on nonlinear springs, assuming
that:
Spring initial stiffness, ultimate load are 1000 t/m and 40 t respectively.
Frame young’s modulus is 2000000 t/m2.
1/2
)603 تحليل وميكانيكا اإلنشاءات المتقدم) انش
Advanced structure analysis and mechanics (STR603)
Postgraduate students-Nov. 2020
2t 2 t/m
60 cm
6m
30 cm
Beam section
60 cm K
K K
30 cm
Column section 8m 8m
2 t/m 10 t
60 cm
K K K
30 cm
5m 4m 4m
Beam section
Figure 3: Beam supported on soil (Problem 3) data.
2/2