Professional Documents
Culture Documents
Assessment 1
Consider the following values:
18, 20, 25, 28, 28, 30, 32, 33
TABLE 1
x - ( - ²
18 8.75 76.56
20 6.75 45.56
25 1.75 3.06
28 1.25 1.56
28 1.25 1.56
30 3.25 10.56
32 5.25 27.56
33 6.25 39.06
Σx=214 Σ( - ²= 205.48
𝜮𝒙
𝒙=
𝒏
𝟐𝟏𝟒
=
𝟖
𝒙 = 𝟐𝟔. 𝟕𝟓
B. Calculate The Mean
Formula and Solution:
1 𝑛 𝑛
𝑥= + +1
2 2 2
1 8 8
= + ( + 1)
2 2 2
1
= (4𝑟𝑡ℎ) + (5𝑡ℎ)
2
1
= (28) + (28)
2
𝑥 = 28
C. Calculate The Mode
= 28
R = HV- LV
= 33-18
R = 15
E. Calculate The Varriance
Formula and Solution:
( ) 2
𝛴 𝒙 − 𝒙
𝑆2 =
𝒏−𝟏
2
𝟐𝟎𝟓. 𝟒𝟖
𝑆 =
𝟖−𝟏
𝟐𝟎𝟓. 𝟒𝟖
=
𝟕
𝑺𝟐 = 29.35
2
𝛴(𝒙 − 𝒙)2
𝑆 =
𝒏−𝟏
205.48
=
𝟖−𝟏
205.48
=
𝟕
𝑆 2 = 𝟐𝟗. 𝟑𝟓
S = 𝟓. 𝟒𝟐
G. Add 10 to each value and recalculate the mean and standard deviation. Compare
the result with the value obtained in (a) and (d).
18, 20, 25, 28, 28, 30, 32, 33 (orig. data set)
28, 30, 35, 38, 38, 40, 42, 43 (+10 to each value)
TABLE 2
x - - ²
28 8.75 76.56
30 6.75 46.56
35 1.75 3.06
38 1.25 1.56
38 1.25 1.56
40 3.25 10.56
42 5.25 27.56
43 6.25 39.06
𝟐
𝜮(𝒙 − 𝒙)𝟐
𝑺 =
𝜮𝒙 𝒏−𝟏
𝒙=
𝒏 𝟐𝟎𝟓. 𝟒𝟖
=
𝟐𝟗𝟒 𝟖−𝟏
=
𝟖 𝟐𝟎𝟓. 𝟒𝟖
=
𝒙 = 𝟑𝟔. 𝟕𝟓 𝟕
𝑺𝟐 = 𝟐𝟗. 𝟑𝟓
𝐒 = 𝟓. 𝟒𝟐
Explanation:
( (
data set is equal to 26.75 while in the second data set is equivalent to 36.75 as
you can see there are different results came from a different dat set. When it
comes to standard deviation, I may say that whether no different value/ result
the first data set is equal to 5.42 same with second data set which is 5.42 also
that's why I may also say that these two sets of a given data has a homogeneous
data because the given data set's o each values are congregated/ intact.
H. Multiply each value by 2 and recalculate the mean and standard deviation. How
does the result compare with (a) and (d).
18, 20, 25, 28, 28, 30, 32, 33 (orig. data set)
36, 40, 50, 56, 56, 60, 64, 66 (multiply each value)
TABLE 3
x - - ²
36 17.5 306.25
40 13.5 182.25
50 3.5 12.25
56 2.5 6.25
56 2.5 6.25
60 6.5 42.25
64 10.5 40.25
66 12.5 156.25
𝟐
𝜮(𝒙 − 𝒙)𝟐
𝑺 =
𝒏−𝟏
𝟖𝟐𝟐
=
𝟖−𝟏
𝟖𝟐𝟐
=
𝟕
𝑺𝟐 = 𝟏𝟏𝟕
𝐒 = 𝟏𝟎. 𝟖𝟒
Explanation:
I realized when calculating this sets of data it may not have a same result
because not all of the given data have the same result when calculating the
mean range as well as the standard deviation you need also to make a table
homogenous you may know how to calculate the standard deviation. The
clustered but if the standard deviation is higher it means the score of data is
determine if that scores/ values is higher than the mean or lower than the