Professional Documents
Culture Documents
Stopper should be
required at Unloading
area.
Electrical cable
Rewinder No- (1) required to be covered
at Rewinder operating
section
Required to be covered
rewinder’s (1)
coupling at back side
area
The belt of ride roll of
Rewinder (1) required
to be covered by
guard.
Spool of paper reel of
Rewinder (2)
Required to be covered
Rewinder No- (2) with guard size 3X3
The motor & roll
required to be covered
at backside of
Rewinder (2)
The roll gear box of
top former & carden
shaft are opened at
backside of machine ,
required to be
covered with
adjustable guard size
6x6
Couch roll & carden
KPM -5 MACHINE AREA shaft both are
opened near top
former, required to
be covered
Pick Up roll of F.D.R.
& motor both are
opened , required to
be covered with
guard size 10X2 & 2X2
The coupling safety
guard is to be
required at 1st, 2nd &
3rd press part. Size
2X2
The motor carden
shaft required to be
cover with safety
guard at fourth group
dryer part. Size 2X2
The refinery motor
coupling is required
to be safety guard at
pulp preparation
section
The felt of primary
pressure screen is
required to cover
with safety guard.