Professional Documents
Culture Documents
CRanksaht Pulley Damper
CRanksaht Pulley Damper
Previous Screen
Welcome: j210aa7
Product: MARINE ENGINE
Model: 3408C MARINE ENGINE 1TS03343
Configuration: 3408C Marine Auxiliary & Generator Set Engine 1TS00001-UP
SENR11330009
Start By:
1 of 4 9/30/2020, 9:48 AM
3408C Marine Auxiliary & Generator Set Engin... https://sis.cat.com/sisweb/sisweb/techdoc/techd...
2. Use two people to remove pulley (1). Pulley (1) weighs approximately 21 kg
(46 lb).
4. Move damper (4) forward far enough to attach a lifting sling as shown. Attach
the lifting sling to a suitable lifting device.
NOTE: Adapter (6) is held in place by twelve bolts (5). When removing twelve
bolts (5) hold adapter (6) by hand to prevent it from falling.
2 of 4 9/30/2020, 9:48 AM
3408C Marine Auxiliary & Generator Set Engin... https://sis.cat.com/sisweb/sisweb/techdoc/techd...
NOTE: The following steps are for the installation of the crankshaft pulley and
damper.
8. If removed, install twelve studs (7) in adapter (6) with Tool (A).
3 of 4 9/30/2020, 9:48 AM
3408C Marine Auxiliary & Generator Set Engin... https://sis.cat.com/sisweb/sisweb/techdoc/techd...
14. Install twelve nuts (2). Tighten twelve nuts (12) to a torque of 65 ± 10 N·m
(48 ± 7 lb ft).
End By:
Copyright 1993 - 2020 Caterpillar Inc. Wed Sep 30 2020 09:48:25 GMT+0700 (Western Indonesia
All Rights Reserved. Time)
Private Network For SIS Licensees. j210aa7
4 of 4 9/30/2020, 9:48 AM