Professional Documents
Culture Documents
Dext123 CNH 18-0011-A004 - en Recording Form For Classification Activity of Process Parameters
Dext123 CNH 18-0011-A004 - en Recording Form For Classification Activity of Process Parameters
18–0011
Enclosure 4
Standard CLASSIFICATION ACTIVITY
OF PROCESS PARAMETERS
Page 1/2
SPECIFICATION Date 30.05.2006
All rights reserved. This standard must not be reproduced or in any way utilized by other parties without the written consent of IVECO.
Form contained in this Enclosure is also available in an electronic version enabling to automati-
cally attribute parameter importance class after introducing the class of relating characteristic
and after defining the effect of the parameter on the characteristic, the difficulty in detecting the
compliance of the characteristic during product process and the cost of compliance recovery.
In case of dispute the only valid reference is the original italian edition.
HANDLING ON INTERLEAF
CFO
IN CASO
ANY DI STAMPA
HARD COPYLAINCOPIA
YOURÈPOSSESSION
DA RITENERSISHOULD
NON CONTROLLATA, PERTANTO,
BE CONSIDERED È NECESSARIO
NOT UP-TO-DATE. SEEVERIFICARE
RELEVANT L'AGGIORNAMENTO NELL'APPOSITO
WEB SITE FOR UP-TO-DATE SITO WEB
DOCUMENT
Enclosure 4
18–0011
Date
Page
30.05.2006
2/2
Key: Tolerance = tolerance span for process parameters