Professional Documents
Culture Documents
IS800-07-
Cl.11.4.2.a
Shear Capacity
Vdb1 =0.4 x f y x Av =0.4*350 * 1920 /1000= 269 kN
Design Shear Strength Vd = 247 kN >= 11 kN Safe UR=0.04
Actual normal stress due to Pon the weld fa = P/Aweld = 116*1000/(320*5.656) = 64 N/mm2
Actual stress on the weld due to moment at 1 Fa = Mz/Zzb + My/Zyb
= ((0.55*10^6)/48264.5333333333)+((0*10^6)/11376.112823903) = 11 N/mm2
Actual stress on the weld due to moment at 2 Fa = Mz/Zzt + My/Zyt
= ((0.55*10^6)/48264.5333333333)+((0*10^6)/11376.112823903) = 11 N/mm2
Toal Normal stress on the weld due to Axial and moment = 76 N/mm2
Maximum stress on the weld due shear & moment √(Fa2+q2)/βjw =SQRT(75.5^2+6.1^2)/ 1 = 76 N/mm2
IS800-07- 2 2
Cl.11.6.3
Allowable stress of the weld =MIN{(0.6*490/SQRT(3)),0.4*320} *1 = 128 N/mm >= 76 N/mm Safe UR=0.59
βjw = 1.2 - 0.2 x lj / (150 te) =MIN{1,1.2-0.2*160/(150*5.656)} = 1.00
5b Shear Capacity
Actual Shear Force V= =SQRT(11^2 + 0^2) = 11.0 kN
IS800-07-
Cl.11.4.2.a
Shear Capacity Vdb =0.4 x f y x Av =0.4*250 * 1508.4 /1000= 151 kN >= 11.0 kN Safe UR=0.07
6 SUMMARY
DESIGN SUMMARY
Fin Plate
4a Check Bolt capacity 4b Check Fin Plate
Slip Critical strength 0.94 Design Tension Strength 0.38
Shear strength after Slip 0.55 Shear Capacity 0.04
Bearing strength for Finplate / supporting beam 0.32 Major axis Moment Capacity 0.05
Tension Capacity 0.00 Minor axis Moment Capacity 0.00
Combined shear and Tension 0.88 Check for Combined Bending and axial force 0.43
Check for Combined Bending and Shear Stress 0.05
Check for Weld capacity 0.59
Supported beam
5a Tension Capacity 1.04
5b Shear Capacity 0.07