Professional Documents
Culture Documents
JESUS TABURA
Address: Rochester Hills MI 48307 Electrical Engineer with more than 20 years of progressive experience specializing
in project team, Execute test plans, electrical analysis VECTOR CANalyzer and
validation (GM3660,G2 appendix of Electrical Systems & safety systems on
breadboards and vehicles. Support mechanical design, software, test engineering
SKILLS and manufacturing. Team-oriented Electrical Engineer who works effectively with
all levels of employees in cross-functional teams.
● Superb organizational and interpersonal
skills
● Equipment: Calibrator Fluke 5100/5700,
● Bench Test Equipment under LAB
environment: Oscilloscope, DMM,
WORK HISTORY
Spectrum Analyzer, Network Analyzer Validation Engineer III GM BU, 02/2016 to 07/2020
● Mechanical Skills: Fabrication and YAZAKI CANTON, MI
assembly used often throughout my ● Develop a list of all tests that are required to validate the design and production
career. of the vehicle wiring system Generate a DVP&R testing to validate the wiring-
● Customer service skills, Scheduling harness design.
Warranty reviews ● ADVPR plan review for approval review to meet customer requirements.
● Data analysis, GM3660, Schematics ● Evaluation and review of test reports
● Six Sigma ● 3660 or Action Plan creation for sign-off
● VECTOR CANalyzer CAN/ LIN ● Bench testing: Planning phase of a program to develop a plan, scheduling all tests
● LabView, Troubleshoot with the test lab, ordering all parts and vehicles, and releasing test results.
● Mathematics, Tutoring ● Vehicle Sign-Off before, during and after testing.
● Operational improvement ● Report generation and PPAP release
● Customer service ● Evaluation of samples with issues reported during testing to determine if the
● Outstanding writing and oral wiring-harness or modules were the issue.
presentation skills ● Test stand training troubleshoot equipment issues, improve test process
● Hardware, Quality Evaluation of Cost saving proposals from Systems and Product engineering to
● Computer operations MS OFFICE, check if the design change is feasible to implement without any degradation of
Reporting Quality or troubleshooting.
● Clients, Sales ● Tracking of DV samples shall meet the requirements of the customer
● 3D design, Wiring specifications.
● Multitasking ● USCAR21, USCAR38, USCAR45, connectors and heat shrink Seal Testing and
● Bilingual English/Spanish more per customer agreement.
● ISO 9000, Time management ● Use of program timing tools to identify when the tests are to begin and end,
● Vehicle Troubleshooting narrow communication with suppliers and customers.
● Equipment calibration ● Troubleshoot prototype and warranty vehicles build issues.
● Process improvement ● Support Plant and Release engineers for simulating hardware fails in wiring-
● Relationship development harness to find the root CAN testing tools to analyze digital communications data
CANalyzer (CAN/LIN) and traditional electrical testing equipment in an
electrical lab atmosphere to test and troubleshoot vehicle systems.
ADDITIONAL INFORMATION VEV Validation Engineer In-House Programs, 06/2011 to 02/2016
● Bilingual English/Spanish. •Reviewed FORD MOTOR COMPANY - DEARBORN, MI
and originated all program engineering ● Vehicle Evaluation and Verification (VEV) Electrical Distribution/Systems In-
changes and releases. Helping in the House Programs Test Engineer Cars & Trucks (Agency Millennium Software
development of engineering Inc.) Develop a list of all tests that are required to validate the design and
expenditures required to attain program production of the vehicle wiring system.
objectives. •Tracked program timings ● EFDVS FORD validation system trained.
related to tooling, design release, pilot, ● Generate a DVP&R testing to validate the wiring-harness design.
test certification, manufacturing, and ● Bench testing: Short circuit, 135% testing, durability cycle test for doors and
production build schedules. •Attended seats.
program core group meetings. •Initiated ● Vehicle testing: Load survey, Fuse Pull, Ground lift.
and prepared paperwork including ● Follow up and tracking vehicle testing at customer facilities: water management,
purchase requests, work order and heat management, corrosion, durability testing and technical support for all
PCN's compliant with established Vehicle EMC testing.
practices and procedures. •Reviewed ● Planning phase of a program to develop a plan, scheduling all tests with the test
engineering design releases and lab, ordering all parts and vehicles, and releasing test results.
programs to make sure part design ● Vehicle Sign-Off before, during and after testing.
objectives are maintained. •Warranty ● Report generation.
analysis review. ● Evaluation of samples with issues reported during testing to determine if the
wiring-harness or modules were the issue.
● Test stand support and hardware/software development, Test plan review, vehicle
setup, data quality review during and after test, report generation Test stand
training troubleshoot equipment issues, improve test process Evaluation of Cost
saving proposals from Systems and Product engineering to check if the design
change is feasible to implement without any degradation of Quality or
troubleshooting.
● Tracking of DV samples shall meet the requirements of the customer
specifications.
● Use of program timing tools to identify when the tests are to begin and end,
narrow communication with suppliers and customers.
● Troubleshoot prototype and warranty vehicles build issues.
● Support Plant and Release engineers for simulating hardware fails in wiring-
harness to find the root cause, and possible solution.
● Attend and participate in the PDT's, PPAP and Design reviews.
● Narrow communication to ensure that component validation is meeting technical
and scheduling requirements.