Professional Documents
Culture Documents
PHYSIOLOGY
Week 3:
Anthropometry
Anthropometry
• Anthrop(s) = human
• Metricos = of or pertaining to measurement
• Basic Definition - the science of measurement of body size [NASA, 1978]
Detailed Definition ‘-
2
Anthropometry
‘-
3
Anthropometry
‘-
4
Anthropometry as a Science
• Engineering anthropometry originated from anthropology, and seeks to
describe the physical dimensions of the (human) body
• Engineering anthropometry as applied to ergonomics and biomechanics can
be separated into:
Physical (Static) anthropometry: addresses fundamental
‘- physical dimensions of the
body
Measures are essentially “fixed” over short time scales, and are “at rest” measures
Functional anthropometry: physical dimensions relevant to completing particular
activities or tasks
Measures are influenced by specific tasks and/or individual performance
5
Example Data Types
• Static Data:
segment length or link length
segment circumference
mass and center-of-mass location
segment moments of inertia
‘-
• Functional Data:
sitting height
reach distance
head clearance
line-of-sight location
6
Engineering Anthropometry: Goals
• Develop functional design data from static data (e.g.
biomechanical or biokinematic models)
• Reliable methods for measuring (and predicting) human
anthropometric parameters
• Evaluate variance in anthropometric data
‘-
that affect:
Workplace design (reach, clearance, functional ability, postural support,
vision, comfort)
Tool design (size, shape, weight)
• Use of anthropometric data in biomechanical models (+ROM and
Strength)
7
Applied Anthropometry
‘-
8
Applied Anthropometry
‘-
9
Applied Anthropometry
‘-
10
Anthropometric Measurement
‘-
11
Anthropometric Measurement
‘-
12
Measurement of External Dimensions
• To obtain meaningful dimensions,
extreme care must be taken to specify
exactly what is being measured and how
14
3D Whole-Body Scanning
‘-
15
Correlations between Measures
‘-
16
• H here is stature
• What is 95th%-ile arm
‘- length?
0.186H + 0.146H = 0.332H
H is 95th%-ile stature
17
From Chaffin et al. (1999) Occupational Biomechanics, Fig 3.9
Ratio Scaling: The “Average Human”
• Anthropometric data for individuals is often estimated using stature or body
weight in linear regression equations
Express average link lengths as a proportion of body stature
• Advantages:
Simplicity ‘-
• Disadvantages:
Relationships are not necessarily linear, nor the same for all individuals
Values represent averages for a portion of a specific population
18
Static Population Data Limitations
• Limitations of most anthropometry data sources
19
Sources of Anthropometric Variability
Gender
‘-
20
Sources of Anthropometric Variability
• Ethnicity/Race
• Secular
Historically and as a function of age
‘-
21
Volume and Mass Measures
• External loads impose some stress but...
• Body segment masses add to the stress
• Example:
hold a screwdriver in a horizontal position
what causes the fatigue that occurs?
‘-
• Important to determine gravitational effects on body structures
• Direct estimation of mass or from product of volume x density
22
‘-
23
Center of Mass Location
• Segment Center-of-Mass (COM)
The point where the entire object mass can be represented and which results in moments
equivalent to the actual distributed object
COM in the “center” only for an object of uniform shape and density
24
Center of Mass: Use
‘-
L
0.43L
Proximal End
COM
Distal End
(wrist) ‘-
Forearm
(elbow)
Mleft = Mright
26
Average Human: COM
• COM as a % of link length
• Where is the whole-body COM?
How could you calculate it?
• How does COM change with
posture?
‘-
29