You are on page 1of 1

Laboratorium SOS PT.

Trakindo Utama
JI. Jend. Sudirman 848, Balikpapan 76114
S•O•S REPORT
Kalimantan Timur
Telp. (0542) 762810, 764515

Customer Information Evaluation / Recommendation **

HANURATA PT. THE OIL IS TOO DARK TO PERFORM LARGE PARTICLE TEST. FERROUS DEBRIS (PQ) AND FE ABOVE NORMAL. PROBABLY CAME FROM NEW
ATTN: Hanurata / Ahmad Zarkasi (A) PART/ASSEMBLY CONTAMINATION. THE UNIT STILL BREAK-IN PERIOD.  CONTINUE TO SAMPLE AT THE NORMAL INTERVAL.
SAMARINDA Sample Notes:
JL.KEBON SIRIH NO.67 KEBON SIRIH MENTENG
JAKARTA PUSAT, DKI JAKARTA RAYA
,Indonesia
Phone 0541741355 Fax 0541741355 Evaluation Code B Monitor Compartment. Interpreted by: Interpreter / Djuhari - E

Unit Information

Unit Number 320D-18 Equip Make Caterpillar Compart Make


Location KELOLOKAN Equip Model 320D Compart Model
Compartment Final Drive-Lt Equip Serial 0BZP04531 Compart Serial
Job No Category Oil Lab No B14B052339

Sample Information Fluid Change History Element Reading (PPM) - ASTM D-5185-09

Report Lab No. Date Taken Date Process Eval On On Oil Oil Added Fluid Filter Type Grade
Equip Chg Chg Si Al Cr Fe Pb Cu *
Sn Ni * Na K * Mo Zn Mg *
Ca P * B *
B14B052339 16/Jan/14 04/Feb/14 B 262 262 0 PERTAMINA 11 2 3 183 1 0 0 0 4 0 10 808 11 3165 765 0

Oil Condition (JOAP) ASTM E 2412 - 10 Physical / Chemical Test Particle Count (Counts / ml) - ASTM D 4464 - 10

Report Lab No ST OXI NIT SUL W (P/N)


* W(pct) FP (P/N) V100 (cSt)
* V40 (cSt)
* TBN TAN
* PQ(idx)
* Visual
* PC04
* PC05
* PC06 PC14 PC15
* ISO.4
* ISO.5
* ISO.6
* ISO.14 * ISO.15
*
(mg KOH/gr) (mg KOH/gr)
B14B052339 N 11.4 170.0 - - - -

Glossaries Elements Oil Condition Physical/Chemical Particle Count (ASTM D 4464 - 10 & ASTM D 7596 - 10)
Si-Silicon (LoD=0.26) Na=Sodium (LoD=0.42) ST=Soot P=Positive PC04=Particle Count at 4 micron
Approved by
AI=Aluminum (LoD=0.12) K=Potassium (LoD=0.64) OXI=Oxidation N=Negative PC05=Particle Count at 5 micron
Cr=Chromium (LoD=0.12) Mo=Molybdenum (LoD=0.20) NIT=Nitration pct=Percentage PC06=Particle Count at 6 micron
Fe=Iron (LoD=0.11) Zn=Zinc (LoD=0.17) SUL=Sulfation cSt=Centistokes PC14=Particle Count at 14 micron
Pb=Lead (LoD=0.82) Mg=Magnesium (LoD=0.01) W=Water - ASTM D 4377-11 PC15=Particle Count at 15 micron
Cu=Copper (LoD=0.01) Ca=Calcium (LoD=0.05) W=Water - ASTM D 4928-11 ISO4=ISO Code 4
Sn=Tin (LoD=0.25) P=Phosphorus (LoD=0.74) FP=Flash Point (ASTM D 3828-09) ISO5=ISO Code 5
Ni=Nickel (LoD=0.38) B=Boron (LoD=0.40) V100=Viscosity 100°C (WIN.MP.05) ISO6=ISO Code 6
Note: Results = 0 < LoD (Limit of Detection)
V40=Viscosity 40°C - ASTM D445-11a ISO14=ISO Code 14
TBN=Total Base Number - ASTM D 4739-11 ISO15=ISO Code 15
* Not Include on scope of Accreditation TAN=Total Acid Number - ASTM D 664-11a Mukhlisin
** The evaluation / Recommendation made by Equipment Management PT. Trakindo Utam
PQ=Particle Quantifier Manager Laboratorium SOS
This analysis provided is indicative of conditions based upon sample information received and the quality of sample supplied. Any decision relating to repair of components is entirely at the descretion of the customer.

You might also like