Professional Documents
Culture Documents
(b)
CLO-1
(2.5+2.5)
Q. 1 Marks
Visualize the diagram of concrete floor and identify Slab Y and Z is an example
of?? Justify your answer with proper reason.
(a) A cantilever retaining wall is 10 ft high and retains sandy soil with a unit
weight of 115 lb/ft2 and a friction angle of 34 degrees. Determine the active
lateral force (lb/ft) on the wall? Show calculations with diagram
CLO-1
(b) For a retaining wall (3+2)
Q. 2
Marks
friction angle = 330, density of soil = 120 pcf, fc/ = 4000 psi, fy = 60,000 psi,
f = 0.55, N = 25020 lbs, FOS = 1.5128
Determine force causing sliding.
(a) For a stair case of a building with clear dimensions of 2.5 x 5.0 m. The two
floors (ground and first) are separated by 3.2 m (The height from ground floor
level to first floor level). Draw the plan of stair
CLO-1
(3+2)
Q. 3 Use the following information: Tread = 30 cm, Rise = 17 cm, Staircase Marks
width=1.0 m, Landing width = 1.0 m
Determine the windward wall Velocity pressure at the top the building shown
below.
CLO-1
(5)
Q.4
Marks
Given:
Exposure C
Kzt = 1.0
Ke = 1.0